This pressure blaster's CFM requirements are determined by the nozzle size that's being used. Six nozzle sizes are available for this blaster. The 3/32" nozzle requires 7 CFM at 80 PSI. The 5/16" nozzle is the largest and it requires 125 CFM at 80 PSI. This blaster includes the 3/32" nozzle and a 1/8" (which requires 15 CFM at 80 PSI) nozzle.
ALC Abrasive Blaster, 90-Lb. Capacity, Model# 40002
This is a carousel with one large zoomable image and a track of thumbnails on the left. Select any of the thumbnail buttons to change the zoomable image on the right. If a thumbnail is a video or 360 degree image thumbnail, or the last thumbnail in the list, the button will open the product media modal.
Click or Tap image to Zoom
$949.99
- Perfect for surface preparation on any type of irregular surfaces where other forms of preparation such as sanding are difficult
- Ideal for removing paint, rust, scale and oxidation on various surfaces
- Steel deadman shutoff handle along with adjustable flow valve and pressure-relieving ball valve provide the operator with complete control of abrasive blasting
- 80-125 psi operating range
- Minimum air volume of 7-15 CFM @ 80 psi
Prop 65 Warning: See Details
See full description
Price for all four:
$1143.96
What's Included
- (1) Abrasive blaster (1) 1in. O.D. x 1/2in. I.D. x 8ft.L heavy-duty blast hose (1) Deadman valve (1) Pressure gauge (1) Pressure relief ball valve (3) Sealing blocks (1) Blast hood (1) 1/8in. ceramic nozzle (1) 3/32in. ceramic nozzle
Downloads
Remove Rust — Leave Hassles In The Dust
Capacity To Spare
The durable 0.9 cu. ft. steel tank holds approximately 90 lbs. of Steel Grit, Glass Bead, Aluminum Oxide, Plastic Grit, Walnut Shells, Black Beauty or other popular abrasive types. The pullup closure makes the hopper easy to load and seals the operation for mess-free results. And with a capacity that large, you can easily get a blasting time of 30 to 45 minutes on one tank load. To make things even easier, the 1/2in. dia. x 8ft.L heavy-duty blast hose allows you to move freely without dragging the blaster unit around.
Control You Can Count On
The blaster operates on standard shop air, requiring an 80–125 operating PSI at 7–15 CFM for optimum performance. An easy-to-use steel deadman control handle provides complete operating control of the blasting media during use, but instantly turns off the media flow when the handle is released.
Safety And Performance Go Hand-In-Hand
Three replaceable sealing blocks are included with this blaster to ensure smooth operation. And to give you complete peace of mind, the built-in pressure relief valve and pressure relieving ball valve meet OSHA requirements to help deliver safe operation.
Built With The Best Components
From its super stable large footprint, to its durable welded steel frame with corrosion-resistant powder-coat finish, to its easy-rolling 6in. rubberized all-terrain wheels, right down to its built-in pull handle for easy transport, even when the blaster is full, you can be sure you're getting top quality components through and through.
Blast with Confidence
Expert Answers Are Available
Northern Tool + Equipment is here to help you succeed. Our field-trained, dedicated team of experts is ready to help — call or email and you'll get a prompt response.
The ALC Advantage
The ALC Pressure Abrasive Blaster Model #40002 is made in the U.S.A. and built to last and perform. But to give you extra peace of mind, ALC stands behind this product with a 2-year limited warranty.
Guaranteed Satisfaction
Shop in complete confidence, knowing that Northern Tool + Equipment protects your investment and is ready to provide you with the assistance and helpful resources you need.
Features + Benefits
- Perfect for surface preparation on any type of irregular surfaces where other forms of preparation such as sanding are difficult
- Ideal for removing paint, rust, scale and oxidation on various surfaces
- Steel deadman shutoff handle along with adjustable flow valve and pressure-relieving ball valve provide the operator with complete control of abrasive blasting
- 80-125 psi operating range
- Minimum air volume of 7-15 CFM @ 80 psi
- Heavy-duty 8ft. Goodyear blast hose for long life
- 125 psi pressure relief valve for operator safety
- Welded steel frame for strength and durability
- 6in. durable rubber wheels and built-in handle allow for easy maneuverability
- Large ceramic blasting nozzle for longer blast life
- Adjustable abrasive flow valve gives the operator precise control of abrasive mixture when blasting
- Powder-coat finish for superior corrosion resistance
- 1/2in. inside diameter blast hose and 1/2in. ball valves for more powerful abrasive and air flow
- Steel deadman handle shuts off automatically when dropped by use of a rubber sealing block at the nozzle to provide safety to the user
- 0.9 cu. ft. pressure tank holds approximately 90 lbs. of abrasive for longer blasting times
- Built-in funnel and pull-up tank closure for faster refills
- Easy-to-read pressure gauge to monitor air pressure
- Recommended for use with a compressor that creates a minimum of 15 CFM @ 90 psi
-
What is the max cfm this unit can handle?
I have a ingersol rand 175 diesel compressor.
I want to paint some antique tractors.-
Helpful?
-
The nozzle size determines the CFM requirement needed to draw the abrasive. We offer six different nozzle sizes for this unit. The smallest (3/32") requires 7cfm @ 80PSI and the largest (5/16") requires 125 CFM @ 80PSI.
This particular unit comes with a 3/32" nozzle and a 1/8" (15CFM) nozzle.Helpful?
-
-
Can a 5/32 nozzle be used with this blaster?
-
This ALC abrasive pressure blaster can be used with a 5/32 nozzle.
Helpful?
-
Yes it can. We offer 6 different size nozzles and 5/32" is one of them. Be advised that as the nozzle size increases so does the required volume of air needed to draw abrasive. The 5/32" nozzle requires 25cfm at 90psi whereas the 1/8" nozzle requires 15cfm at 90psi so you would want to check your compressor.
Helpful?
-
-
Can you use this "sand blaster" for wood working?
I am interested in using this item to "sand" and smooth wood for furniture making purposes. Would this machine work efficiently for this job?
thanks for your response at your earlier convenience!
-
Simply no. Sand blaster are not for sanding and smoothing. Just striping. You can use it on wood to remove paint and coating but should really use soda media which requires the soda blasting kit.
Helpful?
-
A sandblaster is best used to remove paint or other finishes from the wood. To smooth wood surfaces, a sander such as the one shown below would be used.
Helpful?
-
-
product needed to do job?
I am looking to blast some names in concrete through a plastic or vinyl template and I need to know how much air pressure and how small of a blaster I could get to do this project? The only thing the blaster willl have to do is remove some stain and sealer to expose concrete.
-
You will need in excess of 90 to 120 lb of pressure, but the CFM's are very important and I would recommend over 6 cfm. The cfm is the amount of air that your compressor will supply for an extended use. You could have a compressor that will put out 200 lbs of pressure, but if it is unable to maintain the set pressure during the job you will not be able to get done
Helpful?
-
In speaking with the manufacturer there is not set answer for this. Concrete is fairly porous and should be easy to cut into. You should be able to get by with the 50 pound siphon blaster item #1554. You will then just have to experiment with the PSI to see what works best for your application.
Helpful?
-
-
Tank gaskets
1 answer-
Please contact the manufacturer direct for part availability and pricing.
Helpful?
-
-
What's the biggest media I can run through this blaster?? Thanks
1 answer-
The largest recommended grit size will be 20/40 for black magnum 30/40 for glass bead and 14/30 for nut shell.
Helpful?
-
-
Would this sandblaster do well with a 185 diesel air compressor or would the compressor be too strong? I’m going to be sandblaster headstones with it
1 answer-
As long as the air compressor has a max PSI or CFM limit that is greater than the sandblasters max then it would work.
Helpful?
-
-
Can blast hose be replaced with a longer hose?
1 answer-
It would come with a 10ft hose. A 10 ft hose, part number AC40117 and a 50ft with fittings, part number AC40121 could be purchased through our sister company, Jacks Small Engines. Please visit www.jackssmallengines.com for price and availability.
Helpful?
-
-
Can I use crushed glass (40/70) with this blaster? If so, which nozzle do you recommend?
1 answer-
This abrasive blaster can be used with crushed glass. The 1/8" nozzle is recommended for 40/70 grit.
Helpful?
-
-
can i use 00 sand with this
s
1 answer-
00 sand is not recommended as a blasting material for this unit.
Helpful?
-
Accessories We Recommend
This is a carousel with auto-rotating slides. Activate any of the buttons to disable rotation. Use Next and Previous buttons to navigate, or jump to a slide with the slide dots.
See All Portable Abrasive + Soda Blasters
See All ALC Portable Abrasive + Soda Blasters
Currently Viewing This Product
Specifications
Specifications
ALC Abrasive Blaster, 90-Lb. Capacity, Model# 40002
ALC Portable Abrasive Siphon Blaster, 50-Lb. Capacity, Model# 41017
ALC Abrasive Pressure Blaster, 110-Lb. Capacity, Model# 40003
Allsource Roll-About Abrasive Pressure Blaster with Deadman Handle, 110-Lb. Capacity, 20 Gallon, Model# 41003
Max. PSI
Same
125
125
125
110
Max. Air Consumption
Same
25 cfm
15 cfm
15 cfm
25 cfm
Body Material
Same
Steel
Other
Steel
Steel
Body Finish
Same
Powder-Coat
-
Powder-Coat
Powder-Coat
Hose Length
Same
8 ft
-
-
-
Hose Diameter
Same
1
-
-
-
Nozzle Size
Same
Multiple
1/4
Multiple
Multiple
Gun Included
Same
Yes
Yes
Yes
Yes
Safety Valve
Same
Yes
No
Yes
Yes
Moisture Separator
Same
No
No
No
Yes
Media Capacity
Same
90 lb
50 lb
110 lb
110 lb
Main Door Length
Same
0 in
0 in
0 in
0 in
For Use With
Same
Black Beauty, Steel Grit, Glass Bead
Black Beauty, Steel Grit, Glass Bead
-
Black Beauty, Steel Grit, Glass Bead
Product Weight
Same
lb
lb
lb
lb
Dimensions L x W x H (in.)
Same
10.0 x 10.0 x 34.0 in
10.0 x 10.0 x 17.0 in
12.0 x 12.0 x 32.0 in
27.5 x 15.5 x 37.5 in
See All Portable Abrasive + Soda Blasters
See All ALC Portable Abrasive + Soda Blasters
Recently Viewed Items
This is a carousel with auto-rotating slides. Activate any of the buttons to disable rotation. Use Next and Previous buttons to navigate, or jump to a slide with the slide dots.
