This product does not come with a light kit. It is an optional item and can be purchased through our parts department at 1-800-657-0516. It can also be obtained directly from the manufacturer. The part number is AC40338.
ALC Polymer Benchtop Abrasive Blasting Cabinet, 30in., Model# 41390
Top Seller
This is a carousel with one large zoomable image and a track of thumbnails on the left. Select any of the thumbnail buttons to change the zoomable image on the right. If a thumbnail is a video or 360 degree image thumbnail, or the last thumbnail in the list, the button will open the product media modal.
Click or Tap image to Zoom
$429.99
- Perfect for surface preparation on any type of irregular surfaces where other forms of preparation such as sanding are difficult
- Ideal for removing paint, rust, scale and oxidation on various irregular surfaces
- 80-110 psi operating range
- Minimum air volume of 15 CFM @ 80 psi
- Replaceable self adhesive protective window underlay to protect and extend the life of the viewing window
See full description
Price for all four:
$650.96
What's Included
- (1) Polymer benchtop abrasive blast cabinet
Downloads
Features + Benefits
- Perfect for surface preparation on any type of irregular surfaces where other forms of preparation such as sanding are difficult
- Ideal for removing paint, rust, scale and oxidation on various irregular surfaces
- 80-110 psi operating range
- Minimum air volume of 15 CFM @ 80 psi
- Replaceable self adhesive protective window underlay to protect and extend the life of the viewing window
- Tough LDPE polymer one-piece thick-walled construction will not leak
- One piece construction with no seams or leak points, which helps keep the blasting operation contained inside the cabinet
- Tough LDPE polymer plastic will not rust, greatly extending the life of the cabinet when compared to a steel blasting cabinet
- Oversized viewing window dimension of 15in. x 27in. gives the operator a wide viewing area
- Oversized top door opening of 13in. x 25in. allows the operator to easily load a wide variety of items into the blast cabinet
- Large inside work area of 30in.W x 27in.H x 20in.D allows the operator to easily maneuver bulky items inside the cabinet
- Cabinet comes predrilled with 1 1/4in. hole designed to be used with a 1-3 horsepower shop vac as dust collection system
- Recommended for use with an air compressor that creates minimum 15 CFM @ 90 psi
-
Is there a light kit that comes with this? If not do you sell this seperately and what is the part #?
-
Helpful?
-
No there is not. It is an option to buy seperately, our ALC part 40338.
Helpful?
-
-
What else is included in the package?
Not mentioned in the description of contents. Is there a gun, hose, nozzle(s) and pick up tube.
-
There is a gun, nozzle and pick up tube, but no air supply line for the gun and no fittings to seal off the mounted hose to the cabinet. Expect to buy a supply line, hose fitting for the gun and a connection for the line to the cabinet.
Helpful?
-
This ALC Top-Open Benchtop Abrasive Blaster, comes with a gun, one nozzle, hose, pick up tube, grate and cabinet.
Helpful?
-
-
Air Compressor Questions
Hi
I just purchased this item and I am curious as to what would be a good air compressor to use for it. I am doing small parts, mostly cleaning up brazed joints. Some paint removal. I might use it once a week.-
I use a craftsman 2HP/25 gal/150psi with mine. For short periods it is fine. There will be some cycling but not too bad. Bigger is always better but mine is a compromise due to cost and living in an HOA
Helpful?
-
The unit requires a minimum 80 PSI and different CFM requirements depending on the size nozzle you use.
It comes with a 1/4" nozzle that would require 15 CFM. With this you could get by with the compressor item #305174.Helpful?
-
-
Where is it made?
1 answer-
This is manufactured in the USA.
Helpful?
-
-
Media Capacity
How many lbs of aluminum oxide would I need to buy to initially fill this cabinet?
1 answer-
This blast cabinet requires a minimum of 25 lbs. of blasting media (aluminum oxide or other type). Its maximum media capacity is 50 lbs.
Helpful?
-
-
Can Sand not be used in this cabinet?
1 answer-
Sand is not a recommended media for abrasive blaster cabinets.
Helpful?
-
-
Are there replacement nozzles for the gun and if so, what are the numbers?
1 answer-
Yes, the replacement nozzles are available for this blaster cabinet. The 13/64 inch steel nozzle kit is item #155511. The 1/4 inch steel nozzle kit is item #155509. The 13/64 inch ceramic nozzle kit is item #155513. The 1/4 inch ceramic nozzle kit is item #155512. I have included links to some of the nozzle kits below.
Helpful?
-
-
Is an underlayment to protect the window available?
1 answer-
Yes, there is an underlay kit available for this ALC Blaster Cabinet. The underlay set is sold in a 50 pack, it is item #S1577. To view the underlay kit, please click the link below.
Helpful?
-
-
Will this do glass etching? What kind of media will do glass?
1 answer-
This ALC top open bench top blaster cabinet can be used to do glass etching. Walnut shells are recommended for "soft" surfaces such as glass.
Helpful?
-
-
Will this fit a 18x8 wheel?
1 answer-
This bench top cabinet will accommodate an 18"x8" wheel.
Helpful?
-
Accessories We Recommend
This is a carousel with auto-rotating slides. Activate any of the buttons to disable rotation. Use Next and Previous buttons to navigate, or jump to a slide with the slide dots.
See All Abrasive Blasting Cabinets
See All ALC Abrasive Blasting Cabinets
Currently Viewing This Product
Specifications
Specifications
ALC Polymer Benchtop Abrasive Blasting Cabinet, 30in., Model# 41390
ALC Steel Abrasive Blasting Cabinet with LED Light Kit, 60in., Model# 40413L
ALC Polymer Floor Model Abrasive Blasting Cabinet, 35in., Model# 41391
Max. PSI
Same
110
125
125
Max. Air Consumption
Same
15 cfm
15 cfm
15 cfm
Body Material
Same
Other
Steel
Other
Nozzle Size
Same
1/4
1-1/4
1/4
Gun Included
Same
Yes
Yes
Yes
Foot Control Included
Same
No
Yes
No
Media Capacity
Same
362.08 lb
75 lb
50 lb
Main Door Width
Same
17 in
13 in
11 in
Main Door Length
Same
30 in
59 in
34 in
For Use With
Same
Glass Bead, Plastic Bead, Aluminum Oxide
Any Type of Dry Abrasive Such As Glass Bead, Plastic Grit, Aluminum Oxide and Silicon Carbide
Glass Bead, Plastic Bead, Aluminum Oxide
Body Finish
Same
-
Powder-Coat
Black
See All Abrasive Blasting Cabinets
See All ALC Abrasive Blasting Cabinets
Recently Viewed Items
This is a carousel with auto-rotating slides. Activate any of the buttons to disable rotation. Use Next and Previous buttons to navigate, or jump to a slide with the slide dots.
