Reliance Generator Transfer Switch Kit, 6 Circuits, Model# 306CRK

No, the switch itself must be installed indoors. Only the outlet box where you plug in your generator can be outside.

A 5-year warranty is included with the Reliance Generator Transfer Switch Kit, 6 Circuits, Model# 306CRK.

The Reliance Generator Transfer Switch Kit (Model 306CRK) is designed to handle generators with a continuous output of up to 7,500 watts. Since your Westinghouse generator produces 9,500 running watts and 12,500 starting watts, this transfer switch would not be suitable for your generator’s full capacity.

Model #K2F06 is the flush mount kit for 306CRK. At this time Northern Tool does not offer the flush mount kit for the transfer switch.

Please see page 7 of the product manual for instructions on installing 120 Volt Circuits. The product manual can be found underneath the product summary.

The switch will work for solar use. The 30 amp outlet cannot have a GFCI outlet.

The transfer switch is UL1008 listed, C-UL listed and meets all requirements of the 2014 National Electrical Code.

The transfer switch will not work with 400-amp service.

The transfer switch is a manual switch over to generator power.

The transfer switch would need to be connected inside, directly beside your breaker panel. The transfer switch has 6 circuits that you would directly connect to the individual breakers in your panel that you want to run on the generator. It would not have anything connecting between the commercial power.