From experience I can tell you they won't jack up the same, fairly close but not exact. a single 90 degree fitting or a few inches longer line to one vs the other will make a difference not to mention the fact no two jacks will be the same. As long as you can manually adjust as you go you will be fine if it is something unattended then i'd be careful. I run my jack of the same 90psi I use for impact's etc... and it works fine. I did notice it goes slower as it gets 2/3 of the way through it stroke.
Strongway 8-Ton Long Ram Air/Hydraulic Jack, Single Piston, Clevis Base

This is a carousel with one large zoomable image and a track of thumbnails on the left. Select any of the thumbnail buttons to change the zoomable image on the right. If a thumbnail is a video or 360 degree image thumbnail, or the last thumbnail in the list, the button will open the product media modal.

Click or Tap image to Zoom
Shipping:
Free shipping (lower 48 states) - Available nowStore Pickup:
Not available - online only
- Durable frame is constructed of high-grade steel and built to exacting standards for quality and durability
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
- Paint is oil, grease and dirt resistant for easy cleanup
- High-quality large-diameter hydraulic steel cylinder unit results in lower oil pressure needed to move the load, which helps to reduce wear and extend service life
- Piston ram is treated and polished to resist skiving
Prop 65 Warning: See Details
See full description
Description
Key Specs
Reviews
Q & A
Accessories
Warranty
Compare
Product Summary
What's Included
- (1) Long ram jack with air motor (1) Handle
Downloads

Features + Benefits

- Durable frame is constructed of high-grade steel and built to exacting standards for quality and durability
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
- Paint is oil, grease and dirt resistant for easy cleanup
- High-quality large-diameter hydraulic steel cylinder unit results in lower oil pressure needed to move the load, which helps to reduce wear and extend service life
- Piston ram is treated and polished to resist skiving
- Piston ram utilizes a Y-style polyurethane sealing ring with backup ring, preventing load from falling slowly or bypassing oil drift
- Hydraulic pump is constructed of QT450 Nodular Iron which has a higher strength than other types of iron resulting in greater durability
- Hydraulics are powered with a high-quality oil, which offers better corrosion resistance and high/low temperature flexibility, allowing the unit to operate at temperatures between 40°–105°F
- Manual or pneumatic operation for versatility
- Pneumatic operation features a heavy-duty motor (100–125 PSI air rating) and uses a standard 1/4in. NPT air fitting
- Manual operation features a convenient pump handle with rubberized comfort grip
- Mounts directly onto most shop cranes for added versatility
- 6-61/64in. x 4-3/8in. base design provides stability
- Slow release function
- Provides a long lift range with over 19in. of adjustable stroke
- Engineered using the same systems as aerospace technologies and in the automotive OEM sector and built in ISO-certified facilities
- Meets and complies with ASME PASE 2019 safety standards
Key Specs
| Attribute | Specification |
|---|---|
item# | 46200 |
Brand | Strongway |
Manufacturer's Warranty | 1 year limited warranty |
Ship Weight | 42.0 LB |
Lift Capacity | 8 Tons |
| Attribute | Specification |
|---|---|
Max. Lift Height | 42.875 in |
Min. Lift Height | 24.187 in |
Base Dimensions | 6.9 in |
Pistons (qty.) | 1 |
Reviews
Questions & Answers
Questions
-
· 9 years ago
Connect two ram jacks
If I connect two ram jack to the same air line, will I be able to lift both uniformly? If so, will it require more than the minimum 100 psi to operate? My total load distributed between the two is expected to be less than 2 tons with approximately 12 feet spacing between the ram jacks.
-
mmurphy001· 9 years ago
Helpful?
-
StrongwayExpert11· 9 years ago
Two of these jacks can be connected to the same air line. Since each one is still controlled independently, you'll have to operate the controls/switches simultaneously. This jack requires a minimum of 100 PSI to operate. To achieve a full stroke/extension, it requires 8 CFM at 120 PSI. If two of these jacks are connected to the same air line, you'll need a total of 16 CFM at 120 PSI for full extension of each ram.
Helpful?
-
-
· 2 years ago
What is the outside diameter of the ram?
1 answer-
StrongwayExpert13· 2 years ago
The diameter of piston-ram is 1-1/4".
Helpful?
-
-
· 3 years ago
Does this have an 80mm base ?
1 answer-
StrongwayExpert12· 3 years ago
The base of this jack measures 6-61/64" x 4-3/8".
Helpful?
-
-
· 4 years ago
what is the ram diameter where the top mounting hole is located?
1 answer-
StrongwayExpert12· 4 years ago
The diameter of the piston ram is 1.25".
Helpful?
-
-
· 5 years ago
What is the clevis hole diameter?
1 answer-
StrongwayExpert13· 5 years ago
The clevis hole diameter is 5/8".
Helpful?
-
-
· 6 years ago
Hello, what kind of oil or grease do these use? We think one we recently bought is low, as it has lost pressure. Thanks!
1 answer-
StrongwayExpert11· 6 years ago
The jack requires a non foaming hydraulic jack oil. Do not use hydraulic brake fluid, alcohol, glycerin, detergent, motor oil, dirty oil, transmission fluid or turbine oil.
Helpful?
-
-
· 7 years ago
What is the diameter of the main housing? Looking for a ram that is 80mm in diameter?
1 answer-
StrongwayExpert6· 7 years ago
The main body overall diameter for this jack is 80.20 mm.
Helpful?
-
-
· 7 years ago
What are the hole diameters for both the top mounting hole and the clevis end?
1 answer-
StrongwayExpert31· 7 years ago
The diameter for both mounting holes on this long rank jack is 5/8 inch.
Helpful?
-
-
· 7 years ago
Length of time
How long does it take to complete a full stroke at 120 psi . Does weight change that? ? I somehow ordered the wrong jack last year I ended up with the long ram without the air function. (just discovered ) so I'm just making sure it will work with my application before I own 2
1 answer-
StrongwayExpert11· 7 years ago
We are unable to provide a rating (with or without a load) on how fast this jack extends.
Helpful?
-
-
· 8 years ago
What is the pin hole center to center distances?
The description just says min/max lift height which is somewhat ambiguous.
1 answer-
StrongwayExpert13· 8 years ago
The closed center pin to center pin distance is 24-1/2".
Helpful?
-
Warranty
Manufacturer's Warranty
1 year limited warranty
Extend Your Warranty Coverage with a Northern Protection Plan (NPP)
Replacement Plan — 1 Year
A Northern Protection Plan is available after adding the product to your shopping cart.
Compare with Most Popular in Long Ram Jacks
See All Long Ram Jacks
See All Strongway Long Ram Jacks
Currently Viewing This Product
$149.99Shipping:
Free shipping (lower 48 states) - Available nowStore Pickup:
Not available - online only
- $99.99
Shipping:
Backordered: Order now to reserve yours -
Estimated to ship 07/06/26Store Pickup:
Not available - online only
Item # 46210
$79.99Shipping:
Backordered: Order now to reserve yours -
Estimated to ship 09/02/26Store Pickup:
Not available - online only
Specifications
8 Tons
8 Tons
3 Tons
42.875 in
42.937 in
42.937 in
24.187 in
24 in
24 in
6.9 in
4.9 in
3.75 in
1
1
1
See All Long Ram Jacks
See All Strongway Long Ram Jacks
Recently Viewed Items
This is a carousel with auto-rotating slides. Activate any of the buttons to disable rotation. Use Next and Previous buttons to navigate, or jump to a slide with the slide dots.


