Close
Skip to content

Close
Advantage Exclusive

Ironton OHV Horizontal Engine — 208cc, 3/4in. (19.05mm) x 2 19/64in. (58.5mm) Shaft

Item# 45751
Close
Ironton OHV Horizontal Engine — 208cc, 3/4in. (19.05mm) x 2 19/64in. (58.5mm) Shaft

Hover over image to zoom

Click image to enlarge

Tap image to enlarge

Was $139.99
Sale $99.99

Save $40.00

Add to Cart
  •  Cast iron cylinder sleeve reduces bore wear to extend engine life and reduces emissions and oil consumption
  • Dual ball bearings reduce friction for prolonged life
  • Cast iron crankshaft for strength in high PTO torque situations
  • Recoil start with compression release helps you start on the first pull
  • Low oil shutdown turns the engine off if it runs low on oil, preventing serious damage or failure
See full description
In Stock Online
Ship it | See Shipping Options
Buy it in a Store | Check Store Stock
 

Product Summary

This Ironton® OHV Horizontal Engine is an easy-to-install solution for small engine needs. With 208cc and 9 ft.-lbs. Gross Torque/12.5N.m/2800rpm engine torque, this 500-hour engine provides enough power to run a wide range of equipment, including log splitters and pressure washers. Its design incorporates a cast iron cylinder sleeve and dual ball bearing crankshafts. Low oil shutdown turns the engine off if it runs low on oil, preventing serious damage or failure. The recoil start has a compression release that helps you get running on the first pull. Not for sale in CA.

What's Included
  •  (1) Engine
Built to Perform

Built to Perform

Renew Your Power Equipment

Adding a new Ironton OHV engine to your power equipment is like giving it a new lease on life. The Ironton Engine's cast iron cylinder sleeve, dual ball-bearing crankshafts and internal oil splash enhancement system mean that it is an engine you can trust. The low-oil shutdown system turns the engine off if it runs low on oil, preventing serious damage or failure. The engine's recoil start has a compression release that helps it get going on the first pull.

Adaptable Power

The Ironton OHV engine can cover many of your small engine needs, including log splitters, pressure washers, and many other projects. It is easy to install, thanks to its unique design.

The Ironton Advantage

Guaranteed Satisfaction

Shop in complete confidence, knowing that Northern Tool + Equipment protects your investment and is ready to provide you with the assistance and helpful resources you need.

Superior Service and Support

Should you ever need service or support, help is a phone call or e‐mail away. Ironton's field‐trained technical staff is ready to help. For convenience, our professional in‐store service department performs all repairs on site. Replacement parts are stocked at our Northern Tool + Equipment warehouse and ready to ship the same day your order is received.

The Ironton Advantage

Features + Benefits

  •  Cast iron cylinder sleeve reduces bore wear to extend engine life and reduces emissions and oil consumption
  • Dual ball bearings reduce friction for prolonged life
  • Cast iron crankshaft for strength in high PTO torque situations
  • Recoil start with compression release helps you start on the first pull
  • Low oil shutdown turns the engine off if it runs low on oil, preventing serious damage or failure
  • Sound pressure balanced muffler
  • Pleated paper filter and foam pre-cleaner protect engine from harmful debris
Key Specs
Item# 45751
Brand Ironton
Manufacturer's Warranty 3 months parts / 3 months labor
Ship Weight 37.4 lbs
Displacement (cc) 208
Application Log splitter, pressure washer
Shaft Output Horizontal
Engine Type OHV
Start Type Recoil
Shaft Dimensions Diameter x L (in.) 3/4 (19.05mm) x 2 19/64 (58.5mm)
Mounting Base L x W (in.) 6.4 x 3.07
Bolt Circle (in.) 3 5/8
PTO Height (in.) 4.17
Shaft Keyway (in.) 0.19 x 0.2 x 1.8
Max. RPM 3,800
Charging System Amps None
Ignition System Electronic
Cylinders (qty.) 1
Fuel Tank Capacity (qt.) 3.38
Oil Capacity (qt.) 0.5
Air Cleaner Type Pleated paper w/foam pre-cleaner
Muffler Included Yes
Low Oil Alert Yes
Lubrication System Splash
Shaft Rotation (From PTO Shaft Side) Counterclockwise
Bore x Stroke (in.) 2.8 x 2.1
Cylinder Bore Cast iron
Cooling System Air cooled
Carburetor Float/choke
Fuel Pump No
Governor System Mechanical
Dimensions L x W x H (in.) 16 1/2 x 15 x 14 4/5
EPA/CARB Approval (California Air Resource Board) No

Warnings + Disclaimers

High Altitude Operation

CAUTION: Operating at an altitude of greater than 2000 feet (610 meters) may affect your engine's performance, fuel consumption, and emissions. To remain emissions compliant and improve engine performance at higher altitudes, a high-altitude kit is required. A high altitude kit includes a carburetor jet resized to help correct air / fuel mixture at altitude. To order a high altitude kit, or if you have additional questions, contact us at 1-877-234-6869. Please note, engines with the high-altitude kit installed operated at lower altitudes could cause severe engine damage and affect emissions compliance. When modified, a tag or decal should be added to the product stating that a high-altitude kit was installed and to remind you to re-service the carburetor (re-jet) when operating in lower altitude environments.

Customer Reviews

Product Question + Answer
Accessories Frequently Purchased with this Item
We Recommend
No-Spill Gas Can — 5-Gallon, Model# 1450
No-Spill Gas Can — 5-Gallon, Model# 1450
Item# 27125
In Stock Online
Only $34.99
Add to Cart
Safety
3M Metaliks Sport Safety Glasses — Indoor/Outdoor Tinted Lens, Model# 11345-00000
3M Metaliks Sport Safety Glasses — Indoor/Outdoor Tinted Lens, Model# 11345-00000
Item# 174694
In Stock Online
Only $9.99
Add to Cart
3M Peltor Ear Muffs — 22dB NRR, Model# X1A
3M Peltor Ear Muffs — 22dB NRR, Model# X1A
Item# 46039
In Stock Online
Only $18.99
Add to Cart
FREE SHIPPING - Gravel Gear Men's Utility Work Gloves - Black and Tan, Large FREE SHIPPING - Gravel Gear Men's Utility Work Gloves - Black and Tan, Large
Item# 77489L
In Stock Online
Was $16.99
Sale $13.99

Save $3.00 + Free Shipping

Add to Cart
Replacement Parts
Call To Order: 1-800-657-0516

Mon - Fri 7:00 AM - 6:00 PM (Central)
Sat 7:00 AM - 3:00 PM (Central)

Don't Know Your Part Number?

Locating the part number for your item ahead of time will help ensure you quickly receive the correct items.

Find Parts
Parts + Service Available at Stores

Look for stores that have this icon:

Parts + Service

Find Stores

Warranty

Compare with Most Popular Ironton Engines

See All Ironton Engines
 
Currently Viewing
 
 
Ironton OHV Horizontal Engine — 208cc, 3/4in. (19.05mm) x 2 19/64in. (58.5mm) Shaft The price is $99.99.
Ironton OHV Horizontal Engine — 208cc, 3/4in. (19.05mm) x 2 19/64in. (58.5mm) Shaft
4.8 / 5 (31)
Item# 45751
In Stock Online
Was $139.99
Sale $99.99
Save $40.00
5 / 5 (4)
Item# 45752
In Stock Online
Only $319.99
Hide Similarities
Displacement (cc)
208 420  
Application Log splitter, pressure washer Log splitter, pressure washer  
Shaft Output
Horizontal Horizontal  
Engine Type OHV OHV  
Start Type
Recoil Recoil  
Shaft Dimensions Diameter x L (in.) 3/4 (19.05mm) x 2 19/64 (58.5mm) 1 (25.4mm) x 2 27/32 (72.2mm)  
Mounting Base L x W (in.)
6.4 x 3.07 3.7 x 7.7  
Bolt Circle (in.)
3 5/8 5, 6 1/2  
PTO Height (in.)
4.17 5.2  
Shaft Keyway (in.)
0.19 x 0.2 x 1.8 0.248 x 0.236 x 2.2  
Shaft End Tapped (Diameter (in.)/Threads per inch) - 3/8–24, UNF2B Tap  
Max. RPM
3,800 3,800  
Charging System Amps None None  
Ignition System
Electronic Electronic  
Cylinders (qty.)
1 1  
Fuel Tank Capacity (qt.)
3.38 6.34  
Oil Capacity (qt.)
0.5 1.1  
Air Cleaner Type
Pleated paper w/foam pre-cleaner Pleated paper w/foam pre-cleaner  
Muffler Included
Yes Yes  
Low Oil Alert
Yes Yes  
Lubrication System
Splash Splash  
Shaft Rotation (From PTO Shaft Side) Counterclockwise Counterclockwise  
Bore x Stroke (in.)
2.8 x 2.1 3.54 x 2.6  
Cylinder Bore
Cast iron Cast iron  
Cooling System
Air cooled Air cooled  
Carburetor
Float/choke Float/choke  
Fuel Pump
No No  
Governor System
Mechanical Mechanical  
Dimensions L x W x H (in.)
16 1/2 x 15 x 14 4/5 19 7/10 x 17 7/10 x 19 7/10  
EPA/CARB Approval (California Air Resource Board)
No No