Skip to content
TOUGH JOBS DONE RIGHT: Serious Tools Up to 50% Off. Shop the Deals >
Northern Tool Equipment Logo TextNorthern Tool Equipment Logo text link to Home.

Free Gift Card on All Orders Over $100 See Details

Free Gift Card Details

$100 Order
$10
gift card
$250 Order
$25
gift card
$500 Order
$50
gift card
$1000 Order
$100
gift card
  • The promotion will be automatically applied on the Shopping Cart page.
  • To qualify for this offer, your order subtotal must equal $100 or more. Excludes gift cards, free item offers, warranties, Advantage memberships, tax and shipping.
  • Free gift cards will be issued in the form of e-gift cards only, not physical gift cards.
  • E-gift cards will be sent to the email address used in your billing address when your order ships or is picked up.
  • Free e-gift cards expire 10/01/26.
  • Promo code not valid on prior purchases or on Honda and STIHL products and cannot be combined with other promotional offers.
  • Valid online and in participating retail stores.
  • Limited-time offer. Subject to change without notice.
Print

West Build-Your-Own Utility Ramp Kit, 600-Lb. Capacity, 8ft.L, Model# 1242

Item# 46715
"West Build-Your-Own Utility Ramp Kit — 600-Lb. Capacity, 8ft.L, Model# 1242"
West Build-Your-Own Utility Ramp Kit, 600-Lb. Capacity, 8ft.L, Model# 1242

This is a carousel with one large zoomable image and a track of thumbnails on the left. Select any of the thumbnail buttons to change the zoomable image on the right. If a thumbnail is a video or 360 degree image thumbnail, or the last thumbnail in the list, the button will open the product media modal.

West Build-Your-Own Utility Ramp Kit, 600-Lb. Capacity, 8ft.L, Model# 1242

Click or Tap image to Zoom

  • Ideal for loading/unloading scooters, wheelchairs, strollers, walking, cargo
  • 8ft. length
  • 600-lb. load capacity
  • 24in.-36in. maximum lift (3 or 4 steps)
  • Great for minivan or trailer access

See full description

  • Description

  • Key Specs

  • Reviews

  • Q & A

  • Accessories

  • Warranty

  • Compare

Product Summary

The West 8ft. Utility Ramp Kit is designed to load anything that rolls or has wheels, to a maximum lift of 24in.-36in. You supply the decking material (3/4in. plywood recommended), cut it to your desired width (up to 48in.W), then attach the side guide rails that are supplied in the kit. The guide rails add strength and prevent you from rolling off the side of the ramp. Ideal for scooters, wheelchairs, strollers, walking, cargo and more. Includes two rubber-coated support fingers. Folding design allows for compact storage. Made of galvanized steel for strength and corrosion protection. Plywood not included.

What's Included

    (4) Joint plates (2 left, 2 right) (4) Mini joint plates (2 left, 2 right) (4) Main beams (2 left, 2 right) (2) Support fingers (1) Hardware kit

Downloads

Product Manual

Features + Benefits

  • Ideal for loading/unloading scooters, wheelchairs, strollers, walking, cargo
  • 8ft. length
  • 600-lb. load capacity
  • 24in.-36in. maximum lift (3 or 4 steps)
  • Great for minivan or trailer access
  • Requires two pieces of plywood, 48in. long each, cut to desired width
  • 48in. max. width
  • Side guide rails add strength and prevent you from rolling off the side of the ramp
  • Folds for compact storage
  • Galvanized steel for strength and corrosion protection
  • Supplied with two rubber-coated support fingers
  • Includes hardware to attach the 3/4in. decking material
  • Plywood not included
  • Assembly required

Key Specs

AttributeSpecification

item#

46715

Brand

West

Manufacturer's Warranty

24 months parts/24months labor

Ship Weight

28.4 LB

Material

Multiple
AttributeSpecification

Capacity

600 lb

Folding

Yes

Max. Ramp Length

100 in

Fastening Hardware Included

Yes

Reviews

Questions & Answers

33 Reviews This action will navigate to reviews.

Questions

1–10 of 17 Questions  
Sort by:

  1. will 5/8" plywood work without alterations?

    do the screws that hold the wood to the frame screw in from the side or from the bottom? if from the side, I assume the 5/8" board would make a difference. true?

    1. I used 5/8 to save weight. I am old man and not getting any stronger. There was no problem at all building the ramp.

      Helpful?

    2. Actually they are bolts and you have to drill holes in the plywood as they are mounted from the bottom.

      Helpful?

    3. The West Ramp Kit is designed to utilize 3/4 inch thick plywood that is screwed to the support beams from the top down. 5/8 inch plywood could be used although you would lessen the load capacity.

      Helpful?

  2. what does the underside of the finished ramp look like?

    are there flat bars for strength? do the side rails bolt to the wood or are they screwed on?

    1. Yes the sides are a 90 degree so you get a flat bar on the bottom and sides that will keep wheels from rolling off the ramp. They are attached with bolts from the bottom so you have to drill holes in the plywood. It is very strong when completed.

      Helpful?

    2. There are no flat bars. There is an extra hinge if wider then 24". Everything is bolted, no screws

      Helpful?

    3. The underside of the ramp looks very similar to the top side of the ramp except the side rails have small extensions for the wood to be placed on. There are no flat bars going from side to side. The wood sections are attached with screws to the side bars.

      Helpful?

  3. What holds the ramp in place?

    1. for use on a pickup tailgate or flatbed trailer there are two brackets included in the kit that stick out about 4 to 6". they even have a good rubber coating to avoid scratches or slipping.

      Helpful?

    2. This ramp features heavy-duty steel fingers with a rubber coating that keep the ramp from sliding and moving. As long as you don't go over the recommended 4' lift height they will hold the ramp in place.

      Helpful?

  4. What would the weight capacity be with 5/8" plywood?

    the ramp would be 30" wide.

    1. Cant be exact but mine will handle my 200lb all terrain mobility scooter over 19" rise in 8 ft. Not too many items will fit the ramp if they are that big

      Helpful?

    2. The listed weight capacity does not take into effect the thickness or width of the plywood because this will vary for each user. The weight capacity is measuring the strength of the guide rails included in the kit. The guide rails have a weight capacity of 600 pounds. 3/4 inch plywood is recommended.

      Helpful?

  5. Will a 8 ft ramp work for a 17" rise with a motorized scooter

    1. I have 19" rise to cargo door of my van and the 8' ramp is perfect for my mobility scooter

      Helpful?

    2. This ramp will work between any two points regardless of rise. The difference in height between those two points will determine the degree of slope. With a 17" grade variation between ends, that slope would be about 10 degrees. Whether or not that angle is acceptable for you is something you'll need to decide on. That angle can be increased with a shorter ramp or decreased with a longer one.

      Helpful?

  6. Approximately how heavy is 8ft ramp when completed?

    1. Depends on the width you build it. Mine is 24 inches wide and must weigh 50 pounds.

      Helpful?

    2. The West Build-Your-Own Utility Ramp Kit comes with the side rails weighing 27 pounds. The approximate weight would be determined by the grade/weight of plywood used to complete the ramp kit.

      Helpful?

  7. Weight Capacity

    Can I use a thicker plywood? If so can I then hold more weight across it? I'm looking to use it for up to 1,000 pound total weight.
    Thanks

    1. Yes, there is plenty of room for thicker plywood. I used 3/4 in and it's rated for 600 pounds.

      Helpful?

    2. You could use a thicker plywood. The kit only comes with hardware to attach a 3/4" thick plywood. If using a thicker board, you may need to purchase locally new hardware to accommodate the thicker size. Adding thicker plywood would not increase the weight capacity of the ramp. The weight capacity it is rated at is based on the frame and hinges.

      Helpful?

  8. I have two questions, (1) is it made from aluminum ? (2) can you load a riding lawn mower ?

    1 answer

    1. This ramp kit is made from galvanized steel. It will accept 3/4" plywood up to 48" wide and can support up to 600 lbs. It is best to check the dimensions and weight of the mower to determine if this will work for the application.

      Helpful?

  9. Can you order the hinges separate?

    1 answer

    1. We do not offer the hinges separately at this time.

      Helpful?

  10. are any side handrails for this ramp kit.

    1 answer

    1. At this time, handrails are not available for use with this ramp kit.

      Helpful?

Warranty

Manufacturer's Warranty

24 months parts/24months labor