The wall fan should be mounted on 4" x 5" wood studs/joists. When mounting to a wooden surface, or wall, surface shall be a minimum of 1" thick. Using 5/32" drill bit, drill 4 pilot holes at pre-marked locations. Use four 1/4" wood lags of appropriate length (minimum 1").
TPI Commercial Wall Mount Fan - 30in. Dia., 6700 CFM, Pull Chain Switch, Model# CACU30-W

This is a carousel with one large zoomable image and a track of thumbnails on the left. Select any of the thumbnail buttons to change the zoomable image on the right. If a thumbnail is a video or 360 degree image thumbnail, or the last thumbnail in the list, the button will open the product media modal.

Click or Tap image to Zoom
- Pull chain switch
- SJT type 3 conductor
- Coated black steel guards with retaining clips
- Steel hub/spider aluminum 3-paddle blades
- Single-phase ball bearing, open ventilated, permanently lubricated, permanent split capacitor motor
See full description
Recently Viewed Items
This is a carousel with auto-rotating slides. Activate any of the buttons to disable rotation. Use Next and Previous buttons to navigate, or jump to a slide with the slide dots.



