SunStar Heating Products Infrared Ceramic Heater, Natural Gas, 80,000 BTU, Model# SG8-N

Name: SunStar Heating Products Infrared Ceramic Heater, Natural Gas, 80,000 BTU, Model# SG8-N
Brand: SunStar
SKU: 16302

Item# 16302

"SunStar Heating Products Infrared Ceramic Heater, Natural Gas, 80,000 BTU, Model# SG8-N"

Click or Tap image to Zoom

$517.99

Quantity

Save to List

Shipping:
Factory shipped
Store Pickup:
Not available - online only

Constructed from aluminized steel for corrosion resistance and long life
Aluminum reflectors are designed to maximize radiant efficiency
Heaters can be angle mounted horizontally and up to 30 degrees
The minimum mounting height is 14ft. above finished floor for uniform energy distribution and human comfort
Requires the following clearances from any combustible material: 49in. above, 99in. below and 49in. from the sides of the heater

See full description

Complete Your Solution

Price for all four:

$623.96

Frequently Bought Together

This Item: SunStar Heating Products Infrared Ceramic Heater, Natural Gas, 80,000 BTU, Model# SG8-N$517.99
SunStar Heating Products 24 Volt Thermostat Relay Kit, Model# 43274020$24.99
SunStar Heating Products 24 Volt Thermostat, Model# 30562000$32.99
SunStar Heating Products Line Voltage Thermostat, Model# 30348020$47.99

Product Summary

The SunStar Heating Products Ceramic Heater is ideal for spot heating or area heating of remote locations, farm buildings, shops, service areas, pump houses or other hard-to-heat spaces, providing both fuel efficiency of radiant heat and installation flexibility (not recommended for car washes). This is an energy-saving Direct Spark Ignition heater and can be controlled by a line voltage or 24V thermostat (sold separately). May require the following second stage regulators prior to the heater based on gas supply pressure: A regulator up to 2 PSIG line pressure or a regulator above 2 PSIG line pressure (both sold separately). NOT CERTIFIED OR APPROVED FOR RESIDENTIAL USE. Indoor use only. U.S.A.

NOTE: Please review the detailed Installation Operating Instructions (attached) for other specific installation requirements (gas pressure, ventilation etc.) prior to purchasing the heater.

What's Included

(1) Infrared ceramic heater

Downloads

Product Manual

Features + Benefits

Constructed from aluminized steel for corrosion resistance and long life
Aluminum reflectors are designed to maximize radiant efficiency
Heaters can be angle mounted horizontally and up to 30 degrees
The minimum mounting height is 14ft. above finished floor for uniform energy distribution and human comfort
Requires the following clearances from any combustible material: 49in. above, 99in. below and 49in. from the sides of the heater
The minimum supply gas pressure is 7.0in. Water Column (WC) and the maximum supply pressure is 14in. WC gas pressure
If higher gas pressure is supplied, you will need to install a line pressure regulator (sold separately) to reduce it to less than 14in. WC (or 1/2 PSIG)
No assembly required
Heaters are 100% test-fired prior to shipment
CSA design certified