SunStar Heating Products Infrared Ceramic Heater, Natural Gas, 52,000 BTU, Model# SGM6-N1A

Name: SunStar Heating Products Infrared Ceramic Heater, Natural Gas, 52,000 BTU, Model# SGM6-N1A
Brand: SunStar
SKU: 16333

Item# 16333

"SunStar Heating Products Infrared Ceramic Heater, Natural Gas, 52,000 BTU, Model# SGM6-N1A"

Click or Tap image to Zoom

$799.99

Quantity

Save to List

Shipping:
Factory shipped
Store Pickup:
Not available - online only

Constructed from aluminized steel for corrosion resistance and long life
Aluminum reflectors are designed to maximize radiant output
Heaters can be angle mounted horizontally and up to 45 degrees
The minimum mounting height is 14ft. above finished floor for uniform energy distribution and human comfort
Requires the following clearances from any combustible material: 36in. above, 72in. below and 36in. from the sides of the heater

See full description

Complete Your Solution

Price for all four:

$957.96

Frequently Bought Together

This Item: SunStar Heating Products Infrared Ceramic Heater, Natural Gas, 52,000 BTU, Model# SGM6-N1A$799.99
SunStar Heating Products 750 Millivolt Thermostat for SGM Series Infrared Ceramic Heaters, Model# 42489010$34.99
Mr. Heater Universal Gas Connection Kit, Model# F271239$22.99
SunStar Heating Products SIR Series Garage Heater Regulator, Above 2 PSIG, Model# 03483070$99.99

Product Summary

The SunStar Heating Products Ceramic Heater is ideal for spot heating or area heating of remote locations, farm buildings, shops, service areas, pump houses or other hard-to-heat spaces, providing both fuel efficiency of radiant heat and installation flexibility (not recommended for car washes). This is a Millivolt Standing Pilot heater and does not require an external power or electricity to operate, so it's great for use during power outages. Requires a 750 Millivolt Thermostat to operate (sold separately). Indoor use only. U.S.A.

NOTE: Please review the detailed Installation Operating Instructions (attached) for other specific installation requirements (gas pressure, ventilation etc.) prior to purchasing the heater.

What's Included

(1) Infrared ceramic heater

Downloads

Product Manual

Features + Benefits

Constructed from aluminized steel for corrosion resistance and long life
Aluminum reflectors are designed to maximize radiant output
Heaters can be angle mounted horizontally and up to 45 degrees
The minimum mounting height is 14ft. above finished floor for uniform energy distribution and human comfort
Requires the following clearances from any combustible material: 36in. above, 72in. below and 36in. from the sides of the heater
The minimum supply gas pressure is 7.0in. Water Column (WC) and the maximum supply pressure is 14in. WC gas pressure
If higher gas pressure is supplied, you will need to install a line pressure regulator (sold separately) to reduce it to less than 14in. WC (or 1/2 PSIG)
Supply pressure of 7in. WC is critical and supply pressure less than 7in. WC can affect the operation of the pilot/heater
The standing pilot flame can be affected in windy/drafted areas and not recommended in these environments
No assembly required
Heaters are 100% test-fired prior to shipment
CSA design certified