Yes. And that is the way I use it most of the time.
Metaltech Saferstack Complete 2-Section High Tower Scaffolding System — 2500-Lb. Capacity, 10ft. Max Platform Height, Model# M-MRT5710-A
This is a carousel with one large zoomable image and a track of thumbnails on the left. Select any of the thumbnail buttons to change the zoomable image on the right. If a thumbnail is a video or 360 degree image thumbnail, or the last thumbnail in the list, the button will open the product media modal.
Click or Tap image to Zoom
$1629.99
Buy 2 or more at $1564.79 ea.
Choose Options for complete product description, reviews and purchasing.
TYPE
- Saferstack frame stacks in 30% less space than regular frames, allowing the user to be more efficient when moving to and from the jobsite
- Frames interlock for safer storage and transport, helping to prevent stacked frames from sliding
- Scaffold frames have a durable, long lasting blue anti-slip textured powder-coat finish for superior grip and secure footing when climbing
- Perimeter tubes 1-5/8in. O.D. (13 ga. steel), interior tubes 1in. (16 ga. steel)
- Pin spacing is 4ft., the industry standard that's compatible with most scaffolding
See full description
What's Included
- (4) 60in. x 60in. scaffold frames (8) coupling pins (8) locking springs (4) 7ft. x 4ft. cross braces (4) 8in. heavy-duty casters with foot brake (4) Guard rail posts (4) 5ft.L guard rails (4) 7ft.L guard rails (3) 7-ft. x 19in. platforms, 5/8in. plywood deck (8) Pigtail locks (1) Diagonal squaring brace
Downloads
-
Can one section be taken out to reduce the height in half?
-
Helpful?
-
Yes. This products comes in separate components that can be built into two separate 5 foot tall sections.
Helpful?
-
Yes, this Metaltech scaffolding can be reduced in size by removing one of the sections.
Helpful?
-
-
How are the cross braces and the diagnal squaring brace secured to the end frames?
-
This tower scaffolding system cross braces and diagonal squaring brace are all secured to the end frames by inserting the end holes in the braces through the brace pins in the frames. Welded on gravity locks then hold and lock them in place.
Helpful?
-
Thank you for your question. Both braces are secured to the end frames by inserting the end holes in the braces through the brace pins in the frames. They are locked in place with the gravity locks that are welded to the frame
Helpful?
-
-
How many cartons?
How many shipping cartons and what is the weight of each?
-
This ships on one pallet and weighs 419 pounds.
Helpful?
-
Thank you for your question. This unit all comes on one pallet.
Helpful?
-
-
How long does it take to set up and tear down?
Is it pretty easy to set up and take down.. I am using it for athletic events I put on.. I need some scaffolding to make announcements on at the start line..
Also does it breakdown and transport easy?
Thanks
-
very easy to put up and tear down do this by myself no prob
Helpful?
-
This Metaltech scaffolding can be set up or taken down in 15 minutes with two people. The frame ends would have a dimensions of 60"x 60" for transportation purposes.
Helpful?
-
-
1) can leveling legs be attached? 2) can additional units be added to create a higher scaffold?
-
Sorry for the delayed answer.
Leveling jacks can be used on this unit instead of casters and can be purchased seperately. Please refer to Item# 405937 you will need 4 units.
You can add one more level if not attached to a wall. Any higher, you will need to use outriggers (Item# 405952) or attach to a wall.
Helpful?
-
Leveling jack legs may be added to the scaffolding system see the item listed below. Additional units may be added and the maximum height is 30 feet and see item listed below.
Helpful?
-
-
Can you stack multiple towers on top of each other? If so, how many?
-
I have 2 sections w/the guard rails above that. You can add on more sections but if you go past 3 you should anchor it to something. I also used a 20 foot ladder to set on the top and went on up to paint some more that was higher then the 2 sections. Not sure how high to go up but that is up to you.
Helpful?
-
You are able to add as many sections to this scaffolding as you need. Once they are stacked, you will need the cross bars and the outriggers. If you reach 15 feet or higher you will also need the wall anchoring that should be placed every 15 feet. The Northern item # for the additional sections is 405943.
Helpful?
-
-
How tall is it??????????
Kind of crucial info - how high is the top platform? Why does the photo look like 3 sections high?
-
THE PLATFORM IS ABOUT 10.5 FEET HIGH. THE PHOTO LOOKS LIKE IT'S 3 SECTIONS HIGH BECAUSE WHAT YOU SEE ON THE TOP LEVEL IS THE HANDRAILS.
Helpful?
-
The height of the platform of the scaffolding system off the ground at the highest level it can be used is 10 ft. The top rails shown in the picture are the guard rails which are required. The top of the guard rails off of the ground is 13 ft.
Helpful?
-
-
What is the footprint of the scaffold without the outriggers?
-
The foot print is 5x7ft
Helpful?
-
This Metaltech Scaffolding footprint is approximately 84" long and 60" wide.
Helpful?
-
-
How high can the sections be joined; I need to go up to 36-40 feet
1 answer-
You are able to add as many sections to this scaffolding as you need. Once they are stacked, you will need the cross bars and the outriggers. If you reach 15 feet or higher you will also need the wall anchoring that should be placed every 15 feet. The Northern item # for the additional sections is 405943. You would contact the manufacturer for the wall anchoring.
Helpful?
-
-
What is the proper way to access the working platform? Do I need to buy a separate piece with a chain or a swinging gate?
1 answer-
To access the work platform, you will climb up the outside of the scaffolding. You will need to remove the two horizontal bars on the side of the guard rail. Once you have started working, you then will place the bars back in to place for safety.
Helpful?
-
Accessories We Recommend
This is a carousel with auto-rotating slides. Activate any of the buttons to disable rotation. Use Next and Previous buttons to navigate, or jump to a slide with the slide dots.
Recently Viewed Items
This is a carousel with auto-rotating slides. Activate any of the buttons to disable rotation. Use Next and Previous buttons to navigate, or jump to a slide with the slide dots.
