Ironton L-Shaped Raised Garden Bed, 47-1/3in.L x 17-3/4in.W x 11-4/5in.D, Galvanized Corrugated Steel

If you buy two sets of the "Stair-style" kit you will have 4 corners that are almost 2' high. You can reconfigure those corners into a taller bed. The side pieces bolt into the corners and are stacked. There is a tight seam between my side panels on my tall bed. You will also be left with (4) almost 1' high corners from those kits that you can use to make other beds. I've bought several kits and reconfigured to make them work best in my garden. My tall bed 6x3 using 6' parts from other kits for the side panels.

Yes, the parts are easy to reconfigure into the size and shape bed you need. I've bought several sets, including the one that is "stair-style". I used the two tall corners (x2 beds so I would have 4 corners) on the stair-style to make a single bed that is almost 2' deep. With this one I took the narrow ends to make long narrow beds to fit in a particular place. The corner pieces for the "inside" corner on this model is exactly the same as the regular outside corners - just flipped inside with the panels attaching on the "back." To figure out which and how many beds I need, I make a list of the parts including how many corners in each kit. This one gives you 6 corner pieces. Buying two sets will make 3 rectangular beds. I hope this is clear.

After our first purchase of these raised bed, I put them in the garden without landscape cloth, and regretted it. The bind weed and crab grass worked their way to the top in no time. The second and third time I purchased, I put in commercial grade landscape cloth (not plastic), and it made a huge difference. I ended up taking all the soil out of the first raised bed (4'x12') and putting in the landscape cloth. They have been great. I purchased the first one in 2016, and other than some rust, it's held up pretty well.

The package dimensions are 43" L x 12.6" W x 3" H.

This is designed to be built as an "L" shape. The corner pieces are made to give you a 90 degree angle at each corner. You would not be able to extend the sides further.

This planter will need approximately 9 cubic feet of soil.

This Raised Garden Planter Box is made of 100% galvanized steel. There is no warning for California and the product does not contain lead.

The panels are 0.70mm thick and the corner pieces are 1.0mm thick.

The planter does not have a bottom.

The length from the corner right to left on the L is 47.25". The length from bottom corner to top of the L will be 47.35". The width of between the sides is 17.75". The height is 11.8".