I think you can chisel it but it may be hard to do an accurate job and may take off too much. It would defiantly chisel the blocks though. Hope this helps
Ingersoll Rand Air Hammer and Chisel Set, 2 5/8in. Stroke, 3500 BPM, Model# 114GQC
Top Seller
This is a carousel with one large zoomable image and a track of thumbnails on the left. Select any of the thumbnail buttons to change the zoomable image on the right. If a thumbnail is a video or 360 degree image thumbnail, or the last thumbnail in the list, the button will open the product media modal.
Click or Tap image to Zoom
$69.99
- Delivers a 2 5/8in. stroke
- 3500 BPM
- Medium barrel length with built-in power regulator and professional touch trigger
- Ideal for exhaust work, cutting metals, chipping and scraping surfaces
See full description
Price for all four:
$443.96
What's Included
- (1) Air hammer and chisel set
Downloads
Features + Benefits
- Delivers a 2 5/8in. stroke
- 3500 BPM
- Medium barrel length with built-in power regulator and professional touch trigger
- Ideal for exhaust work, cutting metals, chipping and scraping surfaces
-
Can I use this to chip brick?
I have a red brick retaining wall on which I have a few bricks left. They are very difficult to chip with a 2 lb hammer and chisel. Since I have an air compressor, can I use this air hammer with a chisel to chip this brick and even it out?
-
Helpful?
-
You can, but I would suggest a masonry blade for your circular saw. Its dusty and loud but makes a lot cleaner cut for matching up. Make sure to wear eye and ear protection if you do.
Helpful?
-
Yes i think it would work great.
Helpful?
-
Yes it will work.
You will have to take care not do damage the bricks, if you plan to reuse them.
And you may have to allow time for you compressor to recharge periodically, they use quite a bit of air.
Helpful?
-
This hammer would do a fine job on your brick.
Helpful?
-
-
Would this product be good for removing stubborn ceramic floor tile?
-
Yes, I ran an air hose from my garage and fashioned a chisel that made tile removal a snap. Wear eye and ear protection !!!
Helpful?
-
I have not personally used this exact model for removing floor tile, but I have used similar ones and they worked great for removing tile from floors, walls, and counter tops.
Helpful?
-
It should be great but you may want to get a wider chisel than comes with it.But i would try the one that comes with it first.
Helpful?
-
Absolutly this product would work great for removing stubborn ceramic floor tile. I used it for brick removal on my patio and it did a fantastic job.
Helpful?
-
The Ingersoll Rand Air Hammer and Chisel Set is designed for chipping and scraping surfaces, and most likely would work well on stubborn floor tile. When used on flooring, always be careful not to damage the surface beneath the tile, as air hammers can be powerful.
Helpful?
-
-
what CFM does this tool use at full power?
-
This Ingersoll Rand Air Hammer and Chisel Set has a full load CFM rating of 20.
Helpful?
-
Wadesta -
The CFM at load for this air hammer is 20 cfm.
Thank you!
Helpful?
-
-
where is this made
-
The Ingersoll Rand Air Hammer and Chisel Set is manufactured in Taiwan.
Helpful?
-
The 114GQC Air Hammer & Chisel Set is made in Taiwan.
Helpful?
-
-
What additional insert accessories are available for this model114GOC?
1 answer-
Addition accessories for this air hammer chisel would be items 154400 and 154422.
Helpful?
-
-
What shank size bits work on this tool?
1 answer-
The Ingersoll Rand Air Hammer Model 114GQC uses 0.401 inch shank bits.
Helpful?
-
-
Can be use to break concrete slab in house
1 answer-
The Ingersoll Rand 114GQC Air Hammer and Chisel Set is designed for standard-duty tasks such as cutting panels, fixing exhaust systems, and general repairs. While it is powerful with a 2-5/8 inch stroke and 3,500 blows per minute (BPM), it may not be the best tool for breaking a concrete slab.. For breaking concrete, a heavier-duty tool like a demolition hammer or a rotary hammer would be more effective.
Helpful?
-
-
Do you sell the rebuild kits for this chipping hammer?
1 answer-
Please contact the manufacturer for replacement parts.
Helpful?
-
-
What size shank can be used
1 answer-
This Ingersoll Rand Air Hammer/Chisel set has a shank diameter of .401".
Helpful?
-
Accessories We Recommend
This is a carousel with auto-rotating slides. Activate any of the buttons to disable rotation. Use Next and Previous buttons to navigate, or jump to a slide with the slide dots.
Ingersoll Rand Mega Impact Sockets, 86-Pc. Set, 3/8in. and 1/2in. Drives, SAE and Metric, Model# SK34C86
Item # 154500
$269.99
Reg $447.99Save $178.00
Order today to get this price.
See All Air Hammers
See All Ingersoll Rand Air Hammers
Currently Viewing This Product
Specifications
Specifications
Ingersoll Rand Air Hammer and Chisel Set, 2 5/8in. Stroke, 3500 BPM, Model# 114GQC
Ingersoll Rand Air Hammer, 3 1/2in. Stroke, 2000 BPM, 3 CFM, 90 PSI, Model# 117
Ingersoll Rand Quick Change Retainer for Air Hammers, Model# 9512
Klutch Heavy-Duty Air Hammer Kit, 6-Pc., 3in. Stroke, 2500 BPM
Stroke Length
Same
2.625 in
3.5 in
-
3 in
Max. BPM
Same
3,500
2,000
-
2,500
Product Type
Same
Air Hammer
Air Hammer
Spring Retainer Set
Air Hammer
Air Inlet Size
Same
1/4 in
1/4 in
-
1/4 in
Air Consumption
Same
4 cfm
3 cfm
-
2.75 cfm
Min. Hose Size
Same
3/8 in
3/8 in
-
3/8 in
Chisels Included
Same
Yes
No
-
Yes
Case Included
Same
No
No
-
Yes
Shank Size
Same
-
0.401 in
0.401 in
0.401 in
Bore Diameter
Same
-
0.68 in
-
0.75 in
CFM at Load
Same
-
14
-
2.68
Tool Length
Same
-
10 in
-
9.25 in
Included (qty.)
Same
-
-
1
-
See All Air Hammers
See All Ingersoll Rand Air Hammers
Recently Viewed Items
This is a carousel with auto-rotating slides. Activate any of the buttons to disable rotation. Use Next and Previous buttons to navigate, or jump to a slide with the slide dots.