The heater must be connected to an individual branch circuit protected by a 35 amp circuit breaker. The supply cables should be an 8/2 AWG copper wire. The supply cables must be equipped with a dual pole circuit breaker rating of at least 240 volt 35 amp pole as the main cut off switch of power to the heater.
Dr. Infrared Heater, Shop Garage Commercial Heater, 3000 or 6000-Watt, Heat Output 20472 Btu/hour, Heating Capability 600 ft², Model# DR-966

This is a carousel with one large zoomable image and a track of thumbnails on the left. Select any of the thumbnail buttons to change the zoomable image on the right. If a thumbnail is a video or 360 degree image thumbnail, or the last thumbnail in the list, the button will open the product media modal.

Click or Tap image to Zoom
- Heavy Duty 240V Single Phase 3000W/6000W Commercial Electric Heater. In high power mode, the heater will operate at max power of 6000W and in low power mode at 3000W.Heating Coverage:600 sq ft
- Hardwired; Power cord not included. Use 8 AWG copper wires for connection. Dimensions: Height 14.5", Width 13", Depth 14.5".
- UL/CUL Listed Wall or Ceiling Mounted Heater; Bracket Included
- Adjustable Thermostat with HIGH and LOW Setting. A dynamically 8 inch fan provide maximum air flow with minimum turbulence and noise, gently distributes warmth through your area
- 5 Adjustable Louvers for to Direct Airflow
See full description
Recently Viewed Items
This is a carousel with auto-rotating slides. Activate any of the buttons to disable rotation. Use Next and Previous buttons to navigate, or jump to a slide with the slide dots.



