This DEWALT Submersible Sump Pump is not explosion proof.
DEWALT Submersible Sump Pump, 7020 GPH, 1 HP, 1 1/2in. FPT Adapter, Model# DXWP62183
This is a carousel with one large zoomable image and a track of thumbnails on the left. Select any of the thumbnail buttons to change the zoomable image on the right. If a thumbnail is a video or 360 degree image thumbnail, or the last thumbnail in the list, the button will open the product media modal.
Click or Tap image to Zoom
$279.99
- Heavy-duty, oil-cooled 1 HP motor
- Industry-leading 3-million cycle tested vertical piggy-back float switch
- Solid stainless steel and cast iron construction
- High-performance cast iron impeller
- Moves up to 117 gallons per minute at 0ft. and 109 GPM at 10ft. vertical lift.
See full description
Price for all four:
$547.96
-
Is this an explosive proof pump?
-
Helpful?
-
The DEWALT DXWP62183 pump is not explosion-proof, but it is a 1 HP Stainless Steel/Cast Iron Submersible Sump Pump with various features like a rugged cast iron impeller and thermally protected motor
Helpful?
-
-
What is the minimal height of water that activates the pump?
1 answer-
The pump will be able to come on at approximately 3 inches and will shut off at approximately 1 inch.
Helpful?
-
-
Can this pump run 24 /7 if it had to . how long can it run per time 1hr ..8hr etc.
1 answer-
This pump is designed to work in normal sump applications where the pump cycles on and off at normal intervals. Although not recommended to run 24/7, It can run continuously as long as there is sufficient water covering the pump to cool the motor and lubricate the shaft seal. This situation can happen during periods of heavy rain or if a large amount of water needs to be removed.
It is not recommended to use this pump in applications other that sump applications i.e. power a waterfall or fountain. There are pumps designed specifically designed to operate in those applications.
There is no set time limit on the pump. It can run for 30 seconds or 30 minutes without problems as long as the motor is properly cooled.
Helpful?
-
Accessories We Recommend
This is a carousel with auto-rotating slides. Activate any of the buttons to disable rotation. Use Next and Previous buttons to navigate, or jump to a slide with the slide dots.
See All Submersible Utility Pumps
See All DEWALT Submersible Utility Pumps
Currently Viewing This Product
Specifications
Specifications
DEWALT Submersible Sump Pump, 7020 GPH, 1 HP, 1 1/2in. FPT Adapter, Model# DXWP62183
Wacker Neuson Submersible Water Pump, 4920 GPH, 1 HP, Model# PS2 800
Wacker Neuson Submersible Utility Water Pump, 6660 GPH, 2 HP, Model# PS3 1500
Wacker Neuson Submersible Water Pump with Float, 3600 GPH, 1 HP, Model# PST3 750
Max. Flow
Same
7,020 GPH
4,920 GPH
6,660 GPH
3,600 GPH
Volts
Same
120
110
110
110
Solar Powered
Same
No
-
-
-
Phase
Same
Single-phase
-
-
-
Amps
Same
12
21.1
-
26
Vertical Lift
Same
30 ft
-
-
-
Solids Capacity
Same
0.5 in
-
-
-
Power Cord Length
Same
120 in
588 in
384 in
396 in
Inlet Diameter
Same
2 in
-
-
-
Discharge Flow @ 0 Ft.
Same
110 GPH
-
-
-
Discharge Flow @ 10 Ft.
Same
110 GPH
-
-
-
Min. Working Temperature
Same
33 °F
-
-
-
Max. Working Temperature
Same
110 °F
-
-
-
Housing Material
Same
Multiple
Cast-Iron
Cast-Iron
Cast-Iron
Min. Sump Basin Diameter
Same
12 in
-
-
-
Horsepower
Same
1
1
2
1
Product Weight
Same
29.2000 lb
29.0000 lb
63.5000 lb
42.0000 lb
Dimensions L x W x H (in.)
Same
9.5 x 10.5 x 14.3 in
7.625 x 7.4 x 13.4 in
9.5 x 9.5 x 22.5 in
12.5 x 7.31 x 15.31 in
Max. PSI
Same
-
17
30
16.8
Port Size
Same
-
-
2 in
-
Max. Head Pressure
Same
-
-
69 ft
-
See All Submersible Utility Pumps
See All DEWALT Submersible Utility Pumps
Recently Viewed Items
This is a carousel with auto-rotating slides. Activate any of the buttons to disable rotation. Use Next and Previous buttons to navigate, or jump to a slide with the slide dots.