The maximum rise is 82". Maximum lifting height is 85.75". The height of the columns is 100". There is not a minimum ceiling height recommended. The ceiling height is dependent on the vehicle that you are lifting. The ceiling height needed will be 87 inches plus the height of the vehicle. It is recommended to measure prior to ordering.
Free Gift Card Details
$100 Order
$250 Order
$500 Order
$1000 Order
- The promotion will be automatically applied on the Shopping Cart page.
- To qualify for this offer, your order subtotal must equal $100 or more. Excludes gift cards, free item offers, warranties, Advantage memberships, tax and shipping.
- Free gift cards will be issued in the form of e-gift cards only, not physical gift cards.
- E-gift cards will be sent to the email address used in your billing address when your order ships or is picked up.
- Free e-gift cards expire 11/01/26.
- Promo code not valid on prior purchases or on Honda and STIHL products and cannot be combined with other promotional offers.
- Valid online and in participating retail stores.
- Limited-time offer. Subject to change without notice.
BendPak Compact 4-Post Car Lift, 7000-Lb. Capacity, Model# HD-7P

This is a carousel with one large zoomable image and a track of thumbnails on the left. Select any of the thumbnail buttons to change the zoomable image on the right. If a thumbnail is a video or 360 degree image thumbnail, or the last thumbnail in the list, the button will open the product media modal.

Click or Tap image to Zoom
Shipping:
Free shipping (lower 48 states) - Factory shippedStore Pickup:
Not available - online only
- The HD-7P is a 7,000-lb. capacity, narrow-configuration four-post lift. This model offers compact convenience, so it also helps maintain an open, fresh appearance in more spacious garages
- High lift with short runways
- Forklift Required
- Single hydraulic cylinder mounted underneath runway
- Internal anti-sway slider blocks in each column
See full description
Description
Key Specs
Reviews
Q & A
Accessories
Warranty
Compare
Product Summary
What's Included
- (1) 4-post car lift (1) 220V power unit (1) Set of parts
Downloads
Features + Benefits
- The HD-7P is a 7,000-lb. capacity, narrow-configuration four-post lift. This model offers compact convenience, so it also helps maintain an open, fresh appearance in more spacious garages
- High lift with short runways
- Forklift Required
- Single hydraulic cylinder mounted underneath runway
- Internal anti-sway slider blocks in each column
- Oversized self-lubricating cable rollers
- High-speed lifting
- Rugged 1.25" roller axles
- Heavy-duty 3/8in. aircraft cable offers strength and durability
- Multi-position safety locks in each column
- Adjustable lock ladders
- Push-button pneumatic safety release
- Electric / hydraulic power system
Key Specs
| Attribute | Specification |
|---|---|
item# | 53857 |
Brand | BendPak |
Manufacturer's Warranty | 2 year limited warranty |
Ship Weight | 1718.0 LB |
Capacity | 7,000 lb |
Max. Rise | 7 ft |
Horsepower | 3 HP |
| Attribute | Specification |
|---|---|
Motor Phase | Single-phase |
Volts | 220 |
Locking Position (qty.) | 17 |
Time of Full Rise | 60 sec. |
Drive-Thru Clearance | 76.5 in |
Material | Steel |
Reviews
Questions & Answers
Questions
-
· 8 months ago
How tall are the posts? How high must my garage ceiling be to accommodate this model? I have 10' of ceiling height. I have two low profile cars. Each one is less than 4' high. Can this lift work?
1 answer-
ProductExpert11· 8 months ago
Helpful?
-
-
· 5 years ago
Are castors included with this lift or are they available as an assessory for this lift?
1 answer-
ProductExpert31· 5 years ago
Casters are not an option for this lift. It needs to be permanently mounted to the floor.
Helpful?
-
-
· 7 years ago
Is this lift Made In USA or Imported?
1 answer-
ProductExpert10· 7 years ago
This item is imported from China.
Helpful?
-
-
· 10 years ago
Will I need to reinforce concrete in my garage to accomodate the lift system?
I am building a new garage and was wondering if I need to reinforce the concrete pad below the 4 posts. Does the manufacturer have any requirement to do so or recommend doing so? Thanks.
1 answer-
ProductExpert43· 10 years ago
This lift must be installed on a solid level concrete floor with no more than 3-degrees of slope. The required minimum thickness for concrete is 5" /2500 PSI.
Helpful?
-
Accessories We Recommend
This is a carousel with auto-rotating slides. Activate any of the buttons to disable rotation. Use Next and Previous buttons to navigate, or jump to a slide with the slide dots.
Warranty
Manufacturer's Warranty
2 year limited warranty
Extend Your Warranty Coverage with a Northern Protection Plan (NPP)
Repair Plan — 1 Year
A Northern Protection Plan is available after adding the product to your shopping cart.
Compare with Most Popular in Four-Post Lifts
See All Four-Post Lifts
See All BendPak Four-Post Lifts
Currently Viewing This Product
$6595.00Shipping:
Free shipping (lower 48 states) - Factory shippedStore Pickup:
Not available - online only
- $35,995.00
Shipping:
Free shipping (lower 48 states) - Factory shippedStore Pickup:
Not available - online only
- $32,695.00
Shipping:
Free shipping (lower 48 states) - Factory shippedStore Pickup:
Not available - online only
Item # 1446890
$6095.00Shipping:
Free shipping (lower 48 states) - Factory shippedStore Pickup:
Not available - online only
Specifications
7,000 lb
40,000 lb
40,000 lb
9,000 lb
7 ft
5.8 ft
5.8 ft
6 ft
3 HP
5 HP
5 HP
3 HP
Single-phase
Single-phase
Single-phase
Single-phase
220
220
220/240
220
17
13
13
14
60 sec.
75 sec.
75 sec.
50 sec.
76.5 in
109 in
109 in
86.5 in
Steel
Steel
Steel
Steel
-
4 in
4 in
4 in
See All Four-Post Lifts
See All BendPak Four-Post Lifts
Recently Viewed Items
This is a carousel with auto-rotating slides. Activate any of the buttons to disable rotation. Use Next and Previous buttons to navigate, or jump to a slide with the slide dots.







