BendPak 4-Post Wide/Standard Car Lift, 9000-Lb. Capacity, Gray, Model# HD-9XL

We purchased one of these for our garage after originally ordering the HD9-ST. We realized that of all our vehicles, a 98 GMC Suburban, a 99 Tahoe, an 01 Suburban, 04 Yukon XL, and an 06 Silverado Crew Cab, the Silverado was the longest. If this is your vehicle series, it will fit on this lift comfortably. However, this lift is almost too wide for the 02 Blazer we have. It does fit but one must be careful when driving on to it to ensure they don't fall into the middle of the lift with one side.

If possible, I would recommend adding the RBJ-4500 to the purchase. It makes the lift complete and allows you to service wheel, brake and steering suspension components safely.

(Yes this is two years after the fact but it may still be relevant to others)

This lift has a motor that runs on 220V. A 25 amp fuse or larger is recommended.

With the lift up all the way there is 65.5 inches of clearance from the ground to the bottom of the lift runway.

The lift has adjustable runways to accommodate narrow and standard vehicles.

The overall width is 110.25", the width between the columns is 100.25", the outside length of the columns is 198", and the overall length is 224". The mounting base plates are 10" x 12".

The inside diameter between the feet on this lift is 90.2". The feet measure 10" x 12".

This item is imported from China.

Installing this unit outside will void the warranty and is not recommended.