Skip to content
BLUE COLLAR BUYS: Save Up to 50%. Shop Now >
Northern Tool Equipment Logo TextNorthern Tool Equipment Logo text link to Home.
Print

TEKTON 1/4 Inch Drive x 5 Inch Aluminum Spinner Handle (1 Inch Shank) | SHM04109

Item# 7196481
1 Pieces
TEKTON 1/4 Inch Drive x 5 Inch Aluminum Spinner Handle (1 Inch Shank) | SHM04109

This is a carousel with one large zoomable image and a track of thumbnails on the left. Select any of the thumbnail buttons to change the zoomable image on the right. If a thumbnail is a video or 360 degree image thumbnail, or the last thumbnail in the list, the button will open the product media modal.

TEKTON 1/4 Inch Drive x 5 Inch Aluminum Spinner Handle (1 Inch Shank) | SHM04109

Click or Tap image to Zoom

$15.99

  • Shipping: 

    Factory shipped

  • Store Pickup: 

    Not available - online only
  • Five Inch Steel Extension with Aluminum Handle – The spinner handle is made of a 5 inch steel extension that runs all the way through an aluminum handle and is permanently pressed in place
  • Drive Square in the Handle – Add a ratchet for extra leverage without removing the socket from the spinner handle
  • Coarse Knurling and Rounded Areas for Better Grip and Faster Spinning – A deep, sharp-cut diamond pattern is knurled into the rounded sections at the front and back of the handle to create a coarse, non-slip texture
  • Tri-Lobe Shape for More Torque and Anti-Roll – The handle's three-sided geometry gives you the leverage to apply higher turning force by hand while also keeping it from rolling on flat surfaces
  • 1 Inch Shank for Compactness and Quick Tool Changes – The exposed shank is 1 inch long to keep the overall length short and compact, while also being long enough for your fingers to fit under a socket and easily remove it

See full description

  • Description

  • Key Specs

  • Reviews

  • Q & A

  • Warranty

  • Compare

Product Summary

This Tekton aluminum spinner handle is made of a 5in. steel extension that runs all the way through an aluminum handle and is permanently pressed in place. The 1/4in. drive square in the handle allows you to add a ratchet for extra leverage without removing the socket from the spinner handle. Break the fastener loose, pull the ratchet off, and spin it out by hand. Swap in a torque wrench when it's time to tighten to spec. A deep, sharp-cut diamond pattern is knurled into the rounded sections at the front and back of the handle to create a coarse, non-slip texture. The handle's three-sided geometry gives you the leverage to apply higher turning force by hand while also keeping it from rolling on flat surfaces. The exposed shank is 1in. long to keep the overall length short and compact, while also being long enough for your fingers to fit under a socket and easily remove it. Sockets and accessories are held onto the shank by a spring-actuated detent ball. The extension is made of 50BV30 chromium-vanadium steel with a chrome-plated finish. Two "wings" on the shaft of the extension prevent it from being twisted or pulled out of the handle. The handle is made of 6061 aluminum with a matte black anodized finish.

What's Included

    (1) Spinner Handle

Features + Benefits

  • Five Inch Steel Extension with Aluminum Handle – The spinner handle is made of a 5 inch steel extension that runs all the way through an aluminum handle and is permanently pressed in place
  • Drive Square in the Handle – Add a ratchet for extra leverage without removing the socket from the spinner handle
  • Coarse Knurling and Rounded Areas for Better Grip and Faster Spinning – A deep, sharp-cut diamond pattern is knurled into the rounded sections at the front and back of the handle to create a coarse, non-slip texture
  • Tri-Lobe Shape for More Torque and Anti-Roll – The handle's three-sided geometry gives you the leverage to apply higher turning force by hand while also keeping it from rolling on flat surfaces
  • 1 Inch Shank for Compactness and Quick Tool Changes – The exposed shank is 1 inch long to keep the overall length short and compact, while also being long enough for your fingers to fit under a socket and easily remove it

Key Specs

AttributeSpecification

item#

7196481

Brand

Tekton

Manufacturer's Warranty

Lifetime Limited Warranty

Ship Weight

0.31 LB

Drive Size

1/4 in

Tool Length

5 in
AttributeSpecification

Pieces (qty.)

1

Quick Release Push Button

No

Material

Steel

Finish

Chrome

Product Weight

0.3100 lb

Dimensions L x W x H (in.)

5.0 x 1.1 x 1.0 in

Reviews

Questions & Answers

Questions

Warranty

Manufacturer's Warranty

Lifetime Limited Warranty

Recently Viewed Items

This is a carousel with auto-rotating slides. Activate any of the buttons to disable rotation. Use Next and Previous buttons to navigate, or jump to a slide with the slide dots.

TEKTON 1/4 Inch Drive x 5 Inch Aluminum Spinner Handle (1 Inch Shank) | SHM04109
0.0 out of 5 stars.

TEKTON 1/4 Inch Drive x 5 Inch Aluminum Spinner Handle (1 Inch Shank) | SHM04109

Item # 7196481

$15.99