Mixing instructions:
1. The aggregate must be completely dry.
2. Precondition all components to 70° F (21° C) for 24 hours prior to using.
3. Pour the hardener into a pail of grout resin and stir by hand with a spatula or paint paddle until it is a uniform amber color.
4. Pour the mixture into a horizontal shaft mortar mixer or KOL type mixer with out any delay.
5. Add the grout aggregate one bag at a time. Mix only until the aggregate is completely wetted to avoid air entrapment. The first batch will have less liquid because some resin will be retained in the walls of the mixer. With holding 1/2 to 1 bag of aggregate from later batches will compensate for the loss of resin. Always add the aggregate after the premixed liquids have been poured into the mixer.
SikaFlow 648 Low Dust High-Strength, High-Flow, Chemical Resistant Epoxy Grout Kit Part C 47LB Bag

This is a carousel with one large zoomable image and a track of thumbnails on the left. Select any of the thumbnail buttons to change the zoomable image on the right. If a thumbnail is a video or 360 degree image thumbnail, or the last thumbnail in the list, the button will open the product media modal.

Click or Tap image to Zoom
- High chemical resistance enables use in challenging environments
- Excellent freeze/thaw resistance for equipment in low temperature service environments
- Resists water and chloride intrusion for use in wet and aggressive environments
- Resists impact and dampens torque to protect equipment and extend service life
- Extended working time
Prop 65 Warning: See Details
See full description
Recently Viewed Items
This is a carousel with auto-rotating slides. Activate any of the buttons to disable rotation. Use Next and Previous buttons to navigate, or jump to a slide with the slide dots.




