Rust-Oleum 9100 Epoxy, (1) 5-Gallon Pail, Navy Gray

Name: Rust-Oleum 9100 All-purpose Epoxy — Navy Gray
Brand: Rust-oleum
SKU: 100485

Item# 77885

"Rust-Oleum 9100 Epoxy, (1) 5-Gallon Pail, Navy Gray"

Click or Tap image to Zoom

$630.99

Choose Options for complete product description, reviews and purchasing.

Size

Quantity

Save to List

Shipping:
Factory shipped
Store Pickup:
Not available - online only

All-purpose, versatile epoxy
Multiple activators available for various uses with this epoxy at VOC <340 g/l or<250g/L chemical resistant
Mix ratio: 1:1. <250g/L chemical resistant
Easy-to-use

See full description

Product Summary

Rust-Oleum 9100 Epoxy is an all-purpose, versatile epoxy that's perfect for steel beams, rails and concrete floors. A high-solids, next-generation polyamine converted epoxy, it can be used with multiple activators (standard, immersion, low temperature or fast cure) at VOC <340 g/l or<250g/L chemical resistant. Mix ratio: 1:1. Meets U.S.A. requirements for incidental food contact. Standard activator for air and surface temperatures of 50-100° F. Immersion activator for fresh or salt water immersion of steel or concrete where water temperatures do not exceed 125 °F. Great for use in floor coating applications. Produces slightly lower gloss than standard activator. Not for use in potable water tanks. Low temperature activator for air and surface temperatures of 40-60° F. Fast cure activator to minimize downtime. Re-coat in 4 hours at 70°F and 50% RH for air and surface temperatures of 50-100° F. Produces slightly lower glass than standard activator.

What's Included

(1) 5-gallon pail of epoxy

Downloads

Safety Data Sheet

Key Specs

Attribute	Specification
item#	77885
Brand	Rust-oleum
Ship Weight	61.23 LB
Coverage Area	225 ft²

Attribute	Specification
Material	Other
Product Type	Other
Color	Gray

Reviews

Questions & Answers

Questions

1–6 of 6 Questions

2 years ago

When you add 5gal 1:1 activator to the epoxy. How much area will the 10 gallons of the mixed product cover?

1 answer
1. ProductExpert6
  
  2 years ago
  
  After mixed with 1:1 activator, the 10 gallons would cover approximately 1500-2250 square feet.
  
  Helpful?
4 years ago

Is this 100% epoxy

1 answer
1. ProductExpert6
  
  3 years ago
  
  This is not 100% epoxy, it would be 78-81% epoxy.
  
  Helpful?
4 years ago

If flakes are added what do i put over them

1 answer
1. ProductExpert38
  
  4 years ago
  
  A top coat is required when adding flake. This is not sold through Northern Tool and Equipment.
  
  Helpful?
5 years ago

When do I buy the activators?

1 answer
1. ProductExpert11
  
  5 years ago
  
  Both the base and activator components are highly pigmented. Mix each component thoroughly to ensure any settled pigment is re-dispersed before combining the components together. Combine at a 1:1 ratio by volume in a container large enough to hold the total volume. Mix thoroughly for 2-3 minutes. Power mixing is preferred. Do not mix more material than you plan to use within the listed pot life. Use the Standard Activator or Fast Cure Activator at air temperatures between 50-120°F (10-49°C) and when the surface temperature is at least 5°F (3°C) above the dew point and less than 120ºF (49ºC).
  
  Helpful?
5 years ago

Can colored flakes be added to surface. Can traction grit be added to wet surface to make no slip.

1 answer
1. ProductExpert6
  
  5 years ago
  
  Colored flakes can be added to the surface and you can add anti-traction skid traction to the epoxy.
  
  Helpful?
6 years ago

Can this be applied to asphalt surfaces

1 answer
1. ProductExpert12
  
  5 years ago
  
  This epoxy is approved for use on steel, concrete and masonry surfaces only.
  
  Helpful?