Polar HD 1500 ATV Utility Trailer, 1500-Lb. Capacity, 22 Cu. Ft., Model# 8233

No, but you can get it separately. Be sure to buy hardware to attach it as well.

No. It comes with a pin hitch, not a ball hitch.

The trailer does not come with a ball hitch, you will need to purchase that separately.

No it doesn't. All you need is a pin hitch.

no it doesnt you have to buy it separate

no it does not, you will need to purchase a Ultra-Tow Posi-Lock Trailer Coupler. I bought model 605663, just make sure you select the correct ball diameter

This item has a standard pin style hitch.

Pin hitch is all you need.

it comes with a pin hitch but you can buy it separate like i did

it comes with a pin/hitch attachment, you have to purchase the ball mount kit separately

I bought 605663 for my needs - 2" ball

I have the 8232, the pin hitch works fine for a tractor hookup, I used my ATV to haul it around with a 2" ball hitch, it is easier and the ball adapter bolted up without drilling holes or making any adjustments. I will not go back to the pin hookup, the ball hitch is easier, plus if you need to haul something really heavy it will only make your tractor work that much harder. Hope this helps.

This item comes with a pin pull hitch, the images show a similar item, not the exact item that a person would receive if they were to order.

Only fiberglass is rated in that temp range. That said, it's pretty stout. Maybe bolt through plywood over the floor to spread the bolt stress and protect from impact. You're going to have to unload it by hand so you don't have to worry about cracking it when dumping.

Not at all, I have dropped large logs from my backhoe directly into the bed with no problems. It takes a beating.

Used it in Thunder Bay winter - carried wood - very sturdy.

The plastic will not crack if left outside in cold weather within 0-30 degrees. We recommend however that you store it when not in use when the sun is out because that will dry out the plastic and greatly decrease the life of the trailer.

I found assembly easy. There are large parts, steel frame and the poly bucket. Bolts are hardy, 3/4" socket needed. It does take some torque to get the nuts down tight.

I did have some trouble mounting the bucket. They provide a huge phillips head screw driver to help, but the torque needed to get the nuts on there tight made it hard to get enough grip on the driver. I used a power drill to drive the screws and it worked well. The torque needed maxed out the drill a few times!

very easy to assemble

This was very easy to install. I had it together in 35 minutes. It may take most 45 minutes or so.

This Polar Sport Off-Road ATV Trailer requires full assembly except for the tub. Please see the product manual listed on our site for assembly instructions. Depending on your skill level would determine the amount of time required for assembly.

It comes with tires. It is a complete trailer kit and easy to put together.

tires are included.

Yes it comes with wheels & tires.

This Polar Sport off road ATV trailer comes with wheels and tires as pictured.

It fit into my honda pilot just fine

The Polar Sport ATV Trailer has shipping box dimensions of 74 inches long by 41 inches wide by 19 inches high.

Yes

A lawn tractor would be able to pull this trailer when it is fully loaded.

Yes, that is the total width of the trailer; you'll need a passage that wide to pass through.

Yes, the overall width including the tires is 54.5".

This trailer has sealed bearings that do not need greasing.

The manufacturer makes a 2” coupler that is made to fit over the pin style hitch. Please contact our Parts Department at 1-800-222-5381 for price and availability on part number POL8260.