Skip to content
TOUGH JOBS DONE RIGHT: Serious Tools Up to 50% Off. Shop the Deals >
Northern Tool Equipment Logo TextNorthern Tool Equipment Logo text link to Home.
Print

LimbSaw Limbinator Hydraulic Bucket Chainsaw, Model# LS8

Item# 395208
"LimbSaw Limbinator Hydraulic Bucket Chainsaw, Model# LS8"
Top Seller
LimbSaw Limbinator Hydraulic Bucket Chainsaw, Model# LS8

This is a carousel with one large zoomable image and a track of thumbnails on the left. Select any of the thumbnail buttons to change the zoomable image on the right. If a thumbnail is a video or 360 degree image thumbnail, or the last thumbnail in the list, the button will open the product media modal.

LimbSaw Limbinator Hydraulic Bucket Chainsaw, Model# LS8

Click or Tap image to Zoom

$2999.99

  • Shipping: 

    Factory shipped

  • Store Pickup: 

  • Connects to an auxiliary hydraulic hookup for power
  • 20in. bar with 0.325in. chain pitch
  • Operates at 5,000 RPM
  • Self-oiling system provides continuous lubrication directly from your tractor's hydraulic system
  • Reversible motor allows an operator to back the chain out of a pinch

See full description

Complete Your Solution

  • LimbSaw Limbinator Hydraulic Bucket Chainsaw, Model# LS8
  • Northern Tool All Season Bar/Chain Oil, 1 Quart
Price for all two:

$3006.98

Frequently Bought Together

  • Description

  • Key Specs

  • Reviews

  • Q & A

  • Accessories

  • Warranty

  • Compare

Product Summary

The LimbSaw Limbinator Hydraulic Bucket Chainsaw is an innovative tree trimming attachment that uses the height and hydraulic power of a tractor with front-end loader to create a trimmer that is quiet, safe and environmentally friendly without sacrificing power and usability. It mounts to the front-end loader's bucket and connects to an auxiliary hydraulic hookup for power. The 20in. bar, 0.325in. pitch saw sits on an 8ft. steel mast that gives you an 18ft.–21ft. reach, when used with a fully extended loader bucket, and operates at 5,000 RPM. Because the Limbinator uses hydraulic power instead of a gas engine, the only sound it makes comes from the spinning chain and the operator can worry less about falling limbs from the safety of a tractor seat.

What's Included

    (1) Hydraulic saw (LS8) (1) Receiver (1) Bar

Downloads

Product Manual
Play Item Video

Features + Benefits

  • Connects to an auxiliary hydraulic hookup for power
  • 20in. bar with 0.325in. chain pitch
  • Operates at 5,000 RPM
  • Self-oiling system provides continuous lubrication directly from your tractor's hydraulic system
  • Reversible motor allows an operator to back the chain out of a pinch
  • Easily installed, attached and removed at only 86 lbs.
  • Uses 7 GPM flow at 1,500 PSI
  • Uses 3/8in. or 1/2in. hoses (hoses not included)
  • Avoid operating equipment near power lines

Key Specs

AttributeSpecification

item#

395208

Brand

Limbsaw

Manufacturer's Warranty

1 year limited warranty

Ship Weight

90.0 LB

Bar Length

20 in

Chain Pitch

0.325
AttributeSpecification

Chain Gauge

81 in

Power Type

Gas

Horsepower

12.5

Case Included

No

Product Weight

97 lb

Reviews

Questions & Answers

17 Reviews This action will navigate to reviews.

Questions

1–10 of 17 Questions  
Sort by:

  1. Do I need just 1 Hydraulic line coming from my tractor to operate this or 2?

    1 answer

    1. To operate the LimbSaw LS8 Hydraulic Bucket Chainsaw, you will need two hydraulic lines.

      Helpful?

  2. Will this saw work with a John Deere  bucket lift 150R system?

    1 answer

    1. The limb saw is universal and will mount to the bucket on tractors that have a hydraulic system and a flow rate of at least 7 GPM.

      Helpful?

  3. Can the pole be affixed to a universal skid steer female plate?

    1 answer

    1. The saw can mount to a female universal skid steer mount plate.

      Helpful?

  4. will this model#LS8 fit on a kabota B2601

    1 answer

    1. This is designed to fit most tractors that have a hydraulic system flow rate of at least 7 GPM. You may want to verify with the manufacturer of your tractor this would work.

      Helpful?

  5. how much hydraulic oil will have to be replace after an hour of use?

    1 answer

    1. How much hydraulic oil that would need to be replaced would depend on how much the saw was used in 1 hour. For example, 7 gallons per minute x 60 minutes of continual use is 420 gallons recirculating fluid because it's a closed circuit. If the oiler is adjusted correctly to the equipment, then hardly any would be used.

      Helpful?

  6. NEED PARTS FOR LIMBINATOR LS8

    1 answer

    1. Replacement parts would be available through the manufacturer.

      Helpful?

  7. how much hydraulic oil will the unit use per hour of operation

    1 answer

    1. This will vary on how much the saw is used in the hour. If used continual for 60 minutes at 7 gallons per minute, it would use 420 gallons of recirculating fluid because it is closed circuit. If the oiler is adjusted correctly to you equipment, then it would hardly use any.

      Helpful?

  8. Would this work for Horizontal Ground Cutting of Firewood Logs? For a Business?

    1 answer

    1. This unit is designed to be used as tree trimmer only and not for cutting firewood logs on the ground.

      Helpful?

  9. can it cut horizonaly?

    1 answer

    1. This saw cannot cut horizontally. It can cut limbs but cannot cut a tree down.

      Helpful?

  10. What are the maximum, minimum and recommended hydraulic flow rates for this saw?

    1 answer

    1. Optimally, the recommended and preset flow rate for the hydraulics on this unit is 7 GPM. This also has a flow regulator built in to keep the flow in continual balance.

      Helpful?

Accessories We Recommend

This is a carousel with auto-rotating slides. Activate any of the buttons to disable rotation. Use Next and Previous buttons to navigate, or jump to a slide with the slide dots.

See All Chainsaw Maintenance
Northern Tool All Season Bar/Chain Oil, 1 Quart
5.0 out of 5 stars. 9 reviews

Northern Tool All Season Bar/Chain Oil, 1 Quart

Item # 52592

$6.99
See All Picks, Peaveys + Timber Jacks
Ironton Wooden Handle Cant Hook, 48in.L
4.6 out of 5 stars. 79 reviews

Ironton Wooden Handle Cant Hook, 48in.L

Item # 38683

$79.99

Warranty

Manufacturer's Warranty

1 year limited warranty

Extend Your Warranty Coverage with a Northern Protection Plan (NPP)

Repair Plan — 1 Year

A Northern Protection Plan is available after adding the product to your shopping cart.

Recently Viewed Items

This is a carousel with auto-rotating slides. Activate any of the buttons to disable rotation. Use Next and Previous buttons to navigate, or jump to a slide with the slide dots.

LimbSaw Limbinator Hydraulic Bucket Chainsaw, Model# LS8
4.5 out of 5 stars. 17 reviews

LimbSaw Limbinator Hydraulic Bucket Chainsaw, Model# LS8

Item # 395208

$2999.99