Ironton Oil-Free Pancake Air Compressor, 0.3 HP, 3 Gallons, 110 PSI

This pancake compressor does not have a battery, it plugs into a standard 120V outlet.

To fill the tank with air, follow these steps:

Ensure the drain valve is closed.

Ensure the regulator is closed.

Turn the power switch to OFF.

Plug the power cord into a grounded 120 VAC electrical outlet.

Turn the power switch to ON.

Allow the air compressor to run until it builds pressure and automatically shuts off.

This compressor can produce up to 0.6 CFM at 90 PSI and up to 0.9 CFM at 40 PSI. It is best to check the requirements of the sprayer to determine if this compressor will work.

Some common home uses for this pancake compressor are inflating tires, operating pneumatic (air) tools, blowing away dust and debris, painting, winterizing lawn irrigation systems, craft or hobby work, etc.

This air compressor is capable of inflating a tire.

This air compressor delivers up to 0.6 CFM at 90 PSI and 0.9 CFM at 40 PSI. Most framing nailers do require a higher air volume.

The cut in pressure is 90 PSI. The cut out pressure is 110 PSI. The starting pressure is unable to be adjusted, this is preset by the manufacturer.

The compressor will plug into a standard 120 volt three prong outlet.

The decibel rating on the compressor is 84 decibels.

This compressor would not put out enough CFM or PSI to blow out water lines from an irrigation system.