Ironton Instant Canopy, 10ft. x 10ft., Straight Leg, Navy

At this time, we do not offer a screen option for this canopy.

The canopy material is typically measured in grams, and this one weighs approximately 85 to 90 grams.

This canopy does not have a vented top.

It is recommended that two people assemble the canopy. Take the canopy out of the bag. Pull and extend the frame. With the two people at diagonal corners of the structure, each grab a leg and have one person stand in place as the other walks out. Slide the roof lock mechanisms located at each leg up toward the roof corners (two legs at a time). As you extend the leg listen to hear the click. This means that the leg is locked into place. Lift to mid level and lay the fabric over the roof. Line up all of the corners adjust from opposite sides. Locate the nylon fasteners on the underside of the fabric body and attach to the frame. Then step on the leg base and finish adjusting the legs to the desired height. Then take the stakes and insert them into the hole at the base of the legs. You may use a soft tip hammer to install into the ground. Weight bags or other heavy objects may be needed at each foot. The stake alone will not fully secure the canopy in sand or soft soil.

With the legs in the lowest position, the height from the ground to the bottom of the canopy is 70.47", 71.65" in the middle position, and 72.87" in the highest position.