Ironton Anti-Fatigue Interlocking Puzzle Floor Mats, 4-Pk., 24in. x 24in., EVA

the single layer under a weight bench may get eaten thru. we Have an elliptical on it, but i used the 'cut end' from the customized pieces under radiators, and made a 2nd layer(keep multiples of scraps) for under the weight bearing parts.also, a 3/8-1/2" scrap of ply under would better distribute weight

yes, there are 2 types of borders in each pkg.but as you see, once a border is in place, you are starting a NEW set-up. For runs that didn't match, u sed duct tape to seam the two edges together, holds up fine over 40' lengths. also, it cust nicely with either blade or scissors, even a hot knife. you can cut to form around lolly columns

3/8"; to me this is just right for walking on on a cement floor. if using in weight room it may have to be thicker by adding layers. don't drop weights on it for this may need to replace matting.

These floor mats can be trimmed by the user to fit the desired space. Please note that cutting or trimming the mats will void the warranty.

The mats can be glued down. Be sure to check the flooring type to determine what is best for the application.

These mats can be connected to cover a 20' x 20' space by arranging them in a 5 x 5 grid.

These mats are water resistant. Using these mats on a boat deck should be done at the user's discretion.

The edges do not have tapered edges.

Multiple kits can be interlocked together.

If the paint is wet, it may come off with soap and water; however, it is possible that the paint would still stain the mat.