Skip to content

Product Summary

4000 Series Heaters arrive set up to operate at 40,000 BTU/hr. The box comes with a kit that enables user to convert the BTU setting to 30,000. Infrared Heaters direct line of site radiant heat to floor-level objects, which in turn, heat surrounding air to the desired temperature. High intensity heaters are ideal for use in drafty or windy conditions like a loading dock or auto mechanic bays where doors are open during winter conditions. Dock personnel and objects at floor level will benefit from comfortable warmth like the rays of the sun despite wind and cold. This particular heater uses Power Pile ignition and it is fueled by Natural Gas. It ships with a thermostat and no electricity or direct venting are required for operation. Heatstar high intensity heaters are protected by a 10 year, pro-rated burner assembly warranty and a limited one year gas control warranty. Consult the user manual for installation instructions and for clearance to combustible guidance.

Features + Benefits

  • 40,000 BTU/hr.
  • Additional burner orifices allow to increase or decrease the output of the heater to 30,000 BTU/hr.
  • This heater uses a Power Pile ignition and it is fueled by Natural Gas
  • No electricity or direct venting are required for operation
  • This heater is protected by a 10 year, pro-rated burner assembly warranty and a limited one year gas control warranty.
  • Mounting Height 10 - 12ft.
  • Gas Inlet Connection: 1/2in ID FPT
  • Non-corrosive materials are used throughout heaters construction
  • Clearance to Combustibles/ Horizontal: Top 34in; Side 30in; Back 30in; Below 68in

Features + Benefits

  • 40,000 BTU/hr.
  • Additional burner orifices allow to increase or decrease the output of the heater to 30,000 BTU/hr.
  • This heater uses a Power Pile ignition and it is fueled by Natural Gas
  • No electricity or direct venting are required for operation
  • This heater is protected by a 10 year, pro-rated burner assembly warranty and a limited one year gas control warranty.
  • Mounting Height 10 - 12ft.
  • Gas Inlet Connection: 1/2in ID FPT
  • Non-corrosive materials are used throughout heaters construction
  • Clearance to Combustibles/ Horizontal: Top 34in; Side 30in; Back 30in; Below 68in

Warranty

Manufacturer's Warranty

1 year limited warranty