Yes
Fill-Rite Diesel Fuel Transfer Pump, 12 Volt, 10 GPM, Model# FR1612
This is a carousel with one large zoomable image and a track of thumbnails on the left. Select any of the thumbnail buttons to change the zoomable image on the right. If a thumbnail is a video or 360 degree image thumbnail, or the last thumbnail in the list, the button will open the product media modal.
Click or Tap image to Zoom
$169.99
- Lightweight and portable, ideal for diesel fuel, light oils and anti-freeze
- Cast iron body makes it durable through all types of weather
- Uses a 1/5 HP, 2800 RPM motor that delivers high performance
- Has a 30 minute duty cycle and is self-priming so it will not burn out the motor when running dry
- Includes a bypass valve and lip seal for leak protection
See full description
Price for all three:
$729.97
-
does this pump have a on-off swich
-
Helpful?
-
yes
Helpful?
-
The pump does have a on/off switch.
Helpful?
-
-
Can I slow down the pump to 3 gpm
if so can it be done by installing a valve on either the intake or discharge side of the pump itself ?
-
Yes, you can slow down the flow rate by adding a ball valve to the discharge side of the pump (don't do it on the inlet side). If you run the pump for long periods of time, you will wear the motor out faster running it at the lower flow rate.
Helpful?
-
Thanks for your question. It isn't everyday that someone wants to slow down the flow rate!
The short answer is yes, you can slow down the flow rate by adding a ball valve to the discharge side of the pump (don't do it on the inlet side).
Keep in mind that this pump has a bypass valve between the inlet and outlet ports, and by slowing down the flow rate, you are placing the pump in bypass. This will cause the internal load on the motor to increase. The increased load on the motor means it will get hot faster due to the increase in amp draw.
The pump will still work at the lower flow rate, and I want to set the expectation of what may happen. If you run the pump for long periods of time, you will wear the motor out faster running it at the lower flow rate.
If you were to use the FR410B 12 VDC diaphragm pump (providing it is compatible with your liquid), you could reduce the flow rate without increasing the load on the motor as there is no bypass valve in the pump.
Again, thanks for your question. Please respond if you have any questions on the FR410B diaphragm pump!
Have a great day.
Helpful?
-
-
Where can i get the manuel for thispump so that I can order parts for it
1 answer-
You would contact the manufacturer direct for a parts list and to order parts.
Helpful?
-
-
Will this pump fuel oil a distance of 150 feet with a 18-20 foot rise in elevation?
1 answer-
The pump is designed for diesel fuel only. It is not recommended to be used for fuel oil. The lift capacity on the pump will be 8 feet.
Helpful?
-
-
Does the pump “have” to be sitting in the position pictured or can it be oriented in any position while pumping?
1 answer-
The pump would need to be sitting as shown in the image to pump correctly.
Helpful?
-
-
If used with a manual fuel nozzle, will the pump turn off when the nozzle flow is stopped?
1 answer-
The pump would not shut off when the fuel nozzle is closed. There is an internal bypass valve to relieve excess pressure in the pump housing when this happens.
Helpful?
-
-
Is there a filter for diesel contamintes included Some other suggested that the purchse should included some hose, what itme do you have that included hose
1 answer-
The pump will include a strainer, 6.5 foot power cable with battery clips and 30 amp fuse.
Helpful?
-
-
Is this Pump Suitable for Kerosene
1 answer-
This Fill-Rite pump can be used with kerosene.
Helpful?
-
-
Will fuel gravity feed thru the pump when it is shut off?
As in pumping fuel from one tank to another tank that is lower than the first tank, where, in my case, gravity feeding is not an option and is not desirable. Thanks
1 answer-
Fuel would not gravity feed through the pump when it is turned off.
Helpful?
-
-
will this pump handle diesel that has been heated to 195 degrees F??
1 answer-
No, the maximum temperature that the pump can handle is 100 degrees F.
Helpful?
-
Accessories We Recommend
This is a carousel with auto-rotating slides. Activate any of the buttons to disable rotation. Use Next and Previous buttons to navigate, or jump to a slide with the slide dots.
See All DC Powered Fuel Pumps
See All Fill-Rite DC Powered Fuel Pumps
Currently Viewing This Product
Specifications
Specifications
Fill-Rite Diesel Fuel Transfer Pump, 12 Volt, 10 GPM, Model# FR1612
Roughneck 12V Diesel Fuel Transfer Pump, 11 GPM, Manual Nozzle, Hose
GPI 15 GPM 12V Fuel Transfer Pump
GPRO 25GPM 12V Fuel Transfer Pump with Auto Diesel Nozzle
GPM
Same
10
10
15
25
Max. Suction Lift
Same
6.5 ft
-
5.5 ft
15 ft
Amps
Same
20
24
18
35
Inlet Port
Same
1-1/4 in
3/4 in
1 in
1 in
Outlet Port
Same
3/4 in
3/4 in
1/2 in
1 in
Inlet Port (in.)
Same
3/4
3/4
1
1
Self-Priming
Same
Yes
Yes
Yes
Yes
Outlet Port (in.)
Same
3/4
3/4
3/4
1
Speed
Same
2,800 rpm
-
1,900 rpm
1,620 rpm
Duty Cycle
Same
30 min
30 min
30 min
30 min
Bypass Valve
Same
Yes
Yes
Yes
Yes
Horsepower
Same
0.2 HP
0.25 HP
0.2 HP
-
Product Weight
Same
lb
15.2120 lb
23.2500 lb
53.6000 lb
Dimensions L x W x H (in.)
Same
7.12 x 3.75 x 5.12 in
8.0 x 8.0 x 5.25 in
19.0 x 16.0 x 9.0 in
10.86 x 11.38 x 12.11 in
Speed (RPM)
Same
2,800
2,800
1,900
1,620
Volts
Same
-
12
-
-
Nozzle Type
Same
-
Manual
Manual
Automatic
Hose Length
Same
-
13 ft
10 ft
18 ft
Discharge (ft.)
Same
-
3
19.5
18
Hose (in. x ft.)
Same
-
3/4 x 13
3/4 x 10
1 x 18
Max. Total Head
Same
-
-
25 ft
18 ft
Watts
Same
-
-
216
420
Discharge
Same
-
-
19.5 ft
18 ft
See All DC Powered Fuel Pumps
See All Fill-Rite DC Powered Fuel Pumps
Recently Viewed Items
This is a carousel with auto-rotating slides. Activate any of the buttons to disable rotation. Use Next and Previous buttons to navigate, or jump to a slide with the slide dots.
