Skip to content
4TH OF JULY SALE: Save Up to 40% for Americas 250th Shop Now >
Northern Tool Equipment Logo TextNorthern Tool Equipment Logo text link to Home.

Free Gift Card on All Orders Over $100 See Details

Free Gift Card Details

$100 Order

$10
gift card

$250 Order

$25
gift card

$500 Order

$50
gift card

$1000 Order

$100
gift card
  • The promotion will be automatically applied on the Shopping Cart page.
  • To qualify for this offer, your order subtotal must equal $100 or more. Excludes gift cards, free item offers, warranties, Advantage memberships, tax and shipping.
  • Free gift cards will be issued in the form of e-gift cards only, not physical gift cards.
  • E-gift cards will be sent to the email address used in your billing address when your order ships or is picked up.
  • Free e-gift cards expire 11/01/26.
  • Promo code not valid on prior purchases or on Honda and STIHL products and cannot be combined with other promotional offers.
  • Valid online and in participating retail stores.
  • Limited-time offer. Subject to change without notice.
Print

Concentric Hydraulic Pump, 13.6 GPM, 2-Stage, Model# 1001506

Item# 1053
Concentric Hydraulic Pump, 13.6 GPM, 2-Stage, Model# 1001506

This is a carousel with one large zoomable image and a track of thumbnails on the left. Select any of the thumbnail buttons to change the zoomable image on the right. If a thumbnail is a video or 360 degree image thumbnail, or the last thumbnail in the list, the button will open the product media modal.

Concentric Hydraulic Pump, 13.6 GPM, 2-Stage, Model# 1001506

Click or Tap image to Zoom

$269.99

  • Shipping: 

    Free shipping (lower 48 states) - Available now

  • Store Pickup: 

    Out of stock at Fredericksburg VA

  • GPM: 13.6
  • Shaft: 1/2in.
  • Inlet: 1in.
  • Outlet: 1/2in. NPT
  • Minimum 6 HP or larger gas engine, direct drive only

See full description

  • Description

  • Key Specs

  • Reviews

  • Q & A

  • Accessories

  • Warranty

  • Compare

Product Summary

The Concentric 2-stage pump can give you faster cycle times and higher possible pressure with a small engine. Excellent for use on log splitters. 85% efficient.

What's Included

    (1) Pump

Downloads

Product Manual
Play Item Video

Features + Benefits

  • GPM: 13.6
  • Shaft: 1/2in.
  • Inlet: 1in.
  • Outlet: 1/2in. NPT
  • Minimum 6 HP or larger gas engine, direct drive only
  • For use with open center hydraulic systems
  • 1st Stage: 13.6 GPM@650 PSI
  • 2nd Stage: 2.9 GPM@2,500 PSI
  • Maximum Pressure: 3,000 PSI
  • Bolt Circle: 2.83in.
  • 4 holes spaced 2in. on center
  • Hole Diameter: .344in.
  • Shaft Size: 1/2in. x 1 1/2in.
  • Woodruff Key: 1/8in.
  • Rotation: Clockwise

Key Specs

AttributeSpecification

item#

1053

Brand

Haldex

Manufacturer's Warranty

1 year limited warranty

Ship Weight

9.4 LB

Max. PSI

3,000

Max. Flow Rate

13.6 GPM
AttributeSpecification

Shaft Diameter

0.5 in

Shaft Type

Keyed

Pump Type

Gear

Stage

Two-Stage

Material

Cast Iron

Thread Type

Other

Reviews

Questions & Answers

38 Reviews This action will navigate to reviews.

Questions

1–10 of 17 Questions  
Sort by:

  1. will a 6.5 hp engime run this pump, with a 24in. cylinder w/2in. ram

    1. I build wood splitters and always use a 6.5 HP engine
      with this pump and have a fast cycle time,
      This pump is meant to run at full throttle, 3,800rpm.
      Running it at half throttle will give you less power and a slower cycle time.

      Helpful?

    2. In my opinion, a 6.5 hp engine will be fine. My 7.5 hp runs this fine at 1/2 to 3/4 throttle. It does not lug down or try to stall the engine at all. The second stage will kick in when the splitter hits a knot or a dense piece of wood. When this happens it is like the engine has no resistance at all but the ram will slow down and power through the wood. I would even say that this would probably work with a 5 hp engine, but would not be as efficient because it would need to run at a slightly higher throttle setting to keep the engine from working too hard when the pump is in the first stage or " normal running stage " when it is moving the rated 13.6 gpm of hydraulic oil.

      Helpful?

    3. This Haldex hydraulic pump only requires a 6 HP engine to operate properly so your engine will do the job.

      Helpful?

  2. Minimum horsepower?

    According to the product description, this pump requires 6HP or higher. But according to the product manual (pdf), it is only 5HP. Which is correct?

    1. I installed this pump on a 5 hp engine and it works OK, but I can stall the engine before it builds full pressure. I get around that problem by bumping the lever a few times so the engine can recover between bumps. This is only required when it first bites into a big log. The rest of the time it operates quickly without bogging the engine. If I were doing it over, I would choose the 11 GPM pump for a 5 HP engine.

      Helpful?

    2. The 5 HP rating refers to 5 HP @ 2000 psi but the maximum psi is 3000 psi which would require the 6 HP rating. So to be able to utilize the full capability of the pump, the correct rating is 6 HP.

      Helpful?

  3. Haldex hydraulic pump - 13.6 GPM 2-stage,#1001506

    Does this pump run and work in eather direction?

    1. No. This pump is meant to run in the clockwise direction only. Looking at your engine from the rope starter side of the engine will tell you the direction of the engine, normally most engines are clockwise. Since the pump in mounted directly behind the engine, the pump runs the same direction.

      Helpful?

    2. The rotation on this pump is clockwise only.

      Helpful?

  4. Do you have a pump that can be mounted vertical?

    1. In general, hydraulic pumps are not sensitive to orientation. However, for best results, the pump should be mounted in such a way that its inlet is always below the oil level in the tank.

      Helpful?

    2. Yes, in a vertical application a special mounting bracket is required which we do not carry. The engine must have a cast iron flywheel on it.

      Helpful?

  5. Question The 2 stage will bring the cylinder in quicker and then goes to the power mode?

    1 answer

    1. Yes, when the hydraulic pump goes into 2-stage mode, it will provide a high flow rate to quickly move the cylinder into position, then transition to a lower flow rate with higher pressure to hold the position and apply power. It essentially switches from speed mode to a power mode.

      Helpful?

  6. can this pump operate with a belt and pulley system.

    1 answer

    1. This pump cannot be set up with a belt and pulley system.

      Helpful?

  7. Can this pump be mounted above the tank‽

    1 answer

    1. The pump could not be mounted above the oil tank.

      Helpful?

  8. Does this pump have to be run at 3600 rpm? Or can it be run lower. I would like to have a slower ram speed

    1 answer

    1. The pump operates at a maximum RPM of 3600 for effective range of operation. A slower speed can be used but will affect the performance of the two-stage function it is used for.

      Helpful?

  9. what is the best engine to bolt up to this pump?

    1 answer

    1. The gas engine should be a minimum horsepower rating of 6 HP or larger direct drive horizontal shaft engine. I will list an example below.

      Helpful?

  10. IS THE ROTATION LOOKING AT SHAFT END?

    1 answer

    1. The shaft on this hydraulic pump rotates clockwise with the shaft end facing you.

      Helpful?

Warranty

Manufacturer's Warranty

1 year limited warranty

Extend Your Warranty Coverage with a Northern Protection Plan (NPP)

Replacement Plan — 1 Year

A Northern Protection Plan is available after adding the product to your shopping cart.

Recently Viewed Items

This is a carousel with auto-rotating slides. Activate any of the buttons to disable rotation. Use Next and Previous buttons to navigate, or jump to a slide with the slide dots.

Concentric Hydraulic Pump, 13.6 GPM, 2-Stage, Model# 1001506
4.6 out of 5 stars. 38 reviews

Concentric Hydraulic Pump, 13.6 GPM, 2-Stage, Model# 1001506

Item # 1053

$269.99