Skip to content
BLUE COLLAR BUYS: Save Up to 50%. Shop Now >
Northern Tool Equipment Logo TextNorthern Tool Equipment Logo text link to Home.
Print

AR-670-55-TR 72" Lightweight Foam Trailer Ramp Kit 7” Height 5.5° Approach Angle Set of 2

Item# 7076016
2 Included
AR-670-55-TR 72" Lightweight Foam Trailer Ramp Kit 7” Height 5.5° Approach Angle Set of 2

This is a carousel with one large zoomable image and a track of thumbnails on the left. Select any of the thumbnail buttons to change the zoomable image on the right. If a thumbnail is a video or 360 degree image thumbnail, or the last thumbnail in the list, the button will open the product media modal.

AR-670-55-TR 72" Lightweight Foam Trailer Ramp Kit 7” Height 5.5° Approach Angle Set of 2

Click or Tap image to Zoom

$799.99

  • Shipping: 

    Free shipping (lower 48 states) - Factory shipped

  • Store Pickup: 

    Not available - online only
  • 72 inch length, 7 inch rise, and a 5.5 degree approach angle for mild to aggressively lowered vehicles
  • Designed specifically to extend trailer doors and soften breakover for low front ends and long overhangs.
  • Solid, closed cell foam distributes load, resists permanent compression, and keeps the ramp feeling solid under tire.
  • Encapsulated shell resists abrasion, impact, chemicals, and UV while providing a textured, anti slip surface.
  • Strengthened interface zone keeps the trailer door seated on a square, stable surface for consistent geometry.

  • Prop 65 Warning: See Details

See full description

  • Description

  • Key Specs

  • Reviews

  • Q & A

  • Warranty

  • Compare

Product Summary

The Long-Ramp Fix For Low Cars And Tall Trailers If your trailer door looks harmless but every low car treats it like a concrete barrier, the 72in. Lightweight Foam Trailer Ramp Kit from APEX is the fix that actually matches the problem. These trailer ramps are built for situations where shorter ramps still leave you holding your breath. At 72in. in length with a 7in. rise and a 5.5 degree approach angle, they turn a steep, sketchy breakover into a long, controlled ramp that low front ends can live with. You are not guessing with scraps of lumber or stacking blocks until it looks about right. You set the APEX ramps in front of the trailer, drop the door into the reinforced UHMW shelf insert, and drive the car up in one smooth motion. That UHMW reinforcement takes the abuse at the door edge so the foam core does not crush or roll over. The bumper stays off the edge. The splitter stays off the hinges. The exhaust clears. Loading finally feels like part of the process, not a stunt. 72in. Of Gentle, Predictable Approach The geometry of this kit is tuned around two realities. Modern cars keep getting lower, and a lot of trailers are not getting any shorter at the rear. That combination is brutal on front lips and aero. The 72in. length extends the trailer far enough that the vehicle climbs gradually instead of being forced to pivot over a sharp hinge point at the door. The 5.5 degree approach angle is shallow enough for aggressively lowered street cars, serious track builds, and long nose coupes that normally hate trailer ramps. As the tires roll up, the chassis rotates slowly, which keeps the nose from diving down toward the trailer edge. That extra margin is the difference between no problem and that just cost me a new splitter. APEX Ramps Structural Foam Core That Acts Like A Solid Ramp Inside each APEX trailer ramp is a high density structural foam core designed specifically for vehicle loading. This is not hollow plastic. It is a solid, closed cell foam body that distributes weight through the full ramp instead of concentrating it at one thin surface. Under load, the ramp feels planted. There is no metal ring, no flexy sheet, no sense that you are driving onto something temporary. The core resists permanent compression, so the ramp keeps its shape after repeated weekends at the track and countless hauls. It stays light in the hand but behaves like a serious, shop-grade tool under the tire.

What's Included

    (2) 2 Ramp

Features + Benefits

  • 72 inch length, 7 inch rise, and a 5.5 degree approach angle for mild to aggressively lowered vehicles
  • Designed specifically to extend trailer doors and soften breakover for low front ends and long overhangs.
  • Solid, closed cell foam distributes load, resists permanent compression, and keeps the ramp feeling solid under tire.
  • Encapsulated shell resists abrasion, impact, chemicals, and UV while providing a textured, anti slip surface.
  • Strengthened interface zone keeps the trailer door seated on a square, stable surface for consistent geometry.

Key Specs

AttributeSpecification

item#

7076016

Brand

Apex

Manufacturer's Warranty

1 year limited warranty

Ship Weight

26.0 LB

Material

Polystyrene

Capacity

1,750 lb

Included (qty.)

2

Folding

No
AttributeSpecification

Load Capacity per Ramp

1,750 lb

Surface Width

14 in

Max. Ramp Length

72 in

Adjustable Length

No

Fastening Hardware Included

No

Product Weight

25.0000 lb

Dimensions L x W x H (in.)

72.0 x 15.0 x 7.0 in

Reviews

Questions & Answers

Questions

Warranty

Manufacturer's Warranty

1 year limited warranty

Recently Viewed Items

This is a carousel with auto-rotating slides. Activate any of the buttons to disable rotation. Use Next and Previous buttons to navigate, or jump to a slide with the slide dots.