Skip to content
BIG FRIGGIN DEALS: One Big Deal. One Day Only. Shop Todays Offer >
Northern Tool Equipment Logo TextNorthern Tool Equipment Logo text link to Home.
Print

Apex Lightweight Foam Ramp Kit — 48in., 5in. Lift, 5.7° Approach Angle, 4-Post, Set of 2, Model# AR-45-57-LR

Item# 7076024
2 Included
Apex Lightweight Foam Ramp Kit — 48in., 5in. Lift, 5.7° Approach Angle, 4-Post, Set of 2, Model# AR-45-57-LR

This is a carousel with one large zoomable image and a track of thumbnails on the left. Select any of the thumbnail buttons to change the zoomable image on the right. If a thumbnail is a video or 360 degree image thumbnail, or the last thumbnail in the list, the button will open the product media modal.

Apex Lightweight Foam Ramp Kit — 48in., 5in. Lift, 5.7° Approach Angle, 4-Post, Set of 2, Model# AR-45-57-LR

Click or Tap image to Zoom

$369.99

  • Shipping: 

    Free shipping (lower 48 states) - Factory shipped

  • Store Pickup: 

    Not available - online only
  • Ramp Receivers Required for Using APEX Hook-Nose Lift Ramps Fits BendPak 7K and 9K Four Post Lifts, Including 973 Series Set of 2
  • Designed specifically to fit the ramp pockets on BendPak HD-9 and HD-7 series lifts for a positive, repeatable hook nose engagement.
  • 48 inch length, 5 inch lift, and a 5.7 degree approach angle that is much friendlier to low and performance cars than most factory ramps.
  • Internal S shaped reinforcement anchors deep into the core, so the hook acts as part of the ramp instead of a glued on afterthought.
  • Solid, closed cell EPS supports thousands of pounds, will not rust, and does not absorb water, oil, or most common shop chemicals.

  • Prop 65 Warning: See Details

See full description

  • Description

  • Key Specs

  • Reviews

  • Q & A

  • Warranty

  • Compare

Product Summary

Ditch The Heavy Steel Ramps For Good Four post lifts are great. The factory ramps that come with them usually are not. They are heavy, awkward, and just steep enough to make low cars sketchy or annoying to load. The 48in. Lightweight Foam 4 Post Ramp Kit from APEX is built to change that permanently for BendPak HD-9 and HD-7 series lifts. This kit replaces the stock steel or aluminum ramps on compatible BendPak HD-9 and HD-7 four post lifts with a lightweight, hook nose foam alternative that locks into the lift like the originals but feels nothing like them in your hands. You get a smooth 5.7 degree approach angle, 5in. of lift, and a ramp that one person can remove, hang, and reinstall without a full body workout. Once you live with APEX, going back to stock ramps feels prehistoric. Designed Specifically For BendPak HD-9 And HD-7 Lifts These four post lift race car ramps are tuned around BendPak HD-9 and HD-7 series four post lifts that use removable drive up ramps. The hook nose geometry, ramp profile, and pocket engagement are all matched to the ramp receivers on these specific BendPak models for a positive, repeatable fit. This kit is not intended or approved for use on other lift brands or models, even if the ramp pockets appear similar. Always confirm that your lift is part of the BendPak HD-9 or HD-7 family before installing APEX four post ramps. Shorter Length, Fast Loading, Friendly Angle Not every shop or garage needs a 96in. monster ramp. The 48in. Lightweight Foam 4 Post Ramp Kit exists for users who want faster loading and easier handling with a more compact footprint, while still getting a low approach angle. At 48in. long with a 5in. lift and 5.7 degree approach angle, this ramp is ideal for standard ride height vehicles, performance cars, and many mildly lowered setups that still see regular lift use. The angle is noticeably friendlier than most factory steel ramps, which means less drama with front lips, splitters, or long overhangs. For general service work, oil changes, inspections, and detailing, it hits a sweet spot between usability and shop speed.

What's Included

    (2) 2 Ramp

Features + Benefits

  • Ramp Receivers Required for Using APEX Hook-Nose Lift Ramps Fits BendPak 7K and 9K Four Post Lifts, Including 973 Series Set of 2
  • Designed specifically to fit the ramp pockets on BendPak HD-9 and HD-7 series lifts for a positive, repeatable hook nose engagement.
  • 48 inch length, 5 inch lift, and a 5.7 degree approach angle that is much friendlier to low and performance cars than most factory ramps.
  • Internal S shaped reinforcement anchors deep into the core, so the hook acts as part of the ramp instead of a glued on afterthought.
  • Solid, closed cell EPS supports thousands of pounds, will not rust, and does not absorb water, oil, or most common shop chemicals.

Key Specs

AttributeSpecification

item#

7076024

Brand

Apex

Manufacturer's Warranty

1 year limited warranty

Ship Weight

30.0 LB

Material

Polystyrene

Capacity

1,750 lb

Included (qty.)

2

Folding

No
AttributeSpecification

Load Capacity per Ramp

1,750 lb

Surface Width

19 in

Max. Ramp Length

48 in

Adjustable Length

No

Fastening Hardware Included

No

Product Weight

29.0000 lb

Dimensions L x W x H (in.)

49.0 x 20.0 x 5.0 in

Reviews

Questions & Answers

2 Reviews This action will navigate to reviews.

Questions

Warranty

Manufacturer's Warranty

1 year limited warranty

Recently Viewed Items

This is a carousel with auto-rotating slides. Activate any of the buttons to disable rotation. Use Next and Previous buttons to navigate, or jump to a slide with the slide dots.