Fall Protection Anchors, Tie-Offs, Straps + Slings

Fall Protection Anchors, Straps + Slings

Fall protection lifelines depend on anchors, tie-offs, straps and slings. These devices are critical to protecting crew working at heights, and they’re designed in a wide range of configurations to address various applications. You’ll find weight capacities in this selection of fall protection anchors, tie-offs, straps and slings ranging from 310lbs.–5,170lbs. The length of these devices ranges from 20in.–118in., and the breaking strength of these fall protection anchors, tie-offs, straps and slings ranges from 16.01 kN–25 kN. Material content of these units includes steel, stainless steel, zinc-plated steel, aluminum and others.

One of the tops sellers in this mix of fall protection anchors, tie-offs, straps and slings is a bull ring anchor point with a 420lb. capacity and a breaking strength of 16.01 kN. This anchor point is ideally suited to personal fall arrest, restraint and work positioning. Designed to mounted on a CDX roof truss or support beam that’s at least 3in. thick, this anchor point features 100% zinc-plated, weather-resistant steel. This anchor must be fully embedded in the substrate and is intended for use with horizontal lifelines. Another favorite in this selection of fall protection anchors, tie-offs, straps and slings is a tempered reusable roof anchor. This anchor can be attached with nails or screws on wood or metal substrates. It fits roof pitches from 0/12–12/12, so it’s usable on any residential roof. The reusable design of this anchor also means that it can be used time after time at different jobsites. The D-ring on this anchor is easy to use with lanyards and self-retracting lifelines.

If you’re looking for a fall protection beam clamp with a 3-ton capacity, you’ll find that here among the anchors, tie-offs, straps and slings. This industrial-grade unit meets extremely demanding applications. It features all-steel, fully welded box construction with a quick adjustment system that works with most I-beams. A ROHS compliant zinc-plated finish with permanent engraved load rating is easy to identify. This unit includes an individual test certificate and a serial number for traceability. This fall protection beam clamp meets OSHA 1926 Subpart M, OSHA 1910.140, ANSI Z359.1 and ANSI A10.32-2012 standards for fall protection. Check out this complete selection of fall protection anchors, tie-offs, straps and slings now.