Close
Skip to content

Close

Klutch Plasma 375i Plasma Cutter — 230V, 40 Amp

Item# 45436
Klutch Plasma 375i Plasma Cutter — 230V, 40 Amp

Hover over image to zoom

Click image to enlarge

Tap image to enlarge

Only $699.99

Free Shipping (Lower 48 states)

Add to Cart
  • Increased power in a super lightweight package for exceptional portability
  • The inverter system easily turns fluctuations in input power to consistent output for better cuts
  • Requires less input amperage, reducing the overall input power requirement by about 25% when compared to traditional transformer plasma cutters
  • Maximum input amperage draw on 230V is 25 Amps
  • Cuts electrically conductive material
See full description
In Stock Online
Ship it | See Shipping Options
Buy it in a Store | Check Store Stock
 

Product Summary

The Klutch® Plasma 375i Plasma Cutter is a lightweight unit that features powerful inverter technology for smooth cutting. Handles almost any project you can throw at it, from mild steel to copper, brass, stainless and aluminum up to 3/8in. Cuts faster and more precise with a thinner kerf and less slag than cutting with oxy fuel. A smaller heat-affected zone also causes less warping. No gas pressure settings, flame tuning, metal preheating, or gas cylinders or refills to worry about, ever.

What's Included
  • (1) Plasma Cutter
  • (1) 18.5ft. cable and torch lead
  • (1) 10ft. ground cable and clamp
  • (1) Additional electrodes and nozzle
Image of 45436 Image of 45436
Easy to Use — Ready for Action

Easy to Use — Ready for Action

Ready to Use, Right Out of the Box

The all-inclusive Plasma 375 comes packaged and ready to go with just about everything you need to get the job done right — including extra torch electrodes and nozzles. Just provide some shop compressed air and you'll be off and cutting.

230 Volts of Powerful Performance

Plug into a 230V, 40A electrical circuit to deliver unbelievable cutting power and performance that goes above and beyond the capabilities of standard 120V models.

No Dangerous Cutting Gases

Unlike oxyacetylene torches, the Plasma 375 uses regular shop compressed air to create a safe, yet very effective, plasma cutting arc. No need to bring volatile cutting gases into your shop or garage.

Tough, Capable and Versatile

If It Conducts Electricity, You Can Cut It!

Whether you're working on steel, stainless steel, aluminum, galvanized steel, copper or brass, if the material can conduct electricity with little effort, the Plasma 375 can cut it. Make clean cuts in up to 3/8 in. steel, or sever cuts in up to 1/2 in. steel.

Clean Cuts with Minimal Warping

Plasma cutting efficiently reduces heat retention in the metal. Less heat means less heat-affected area, resulting in less warping and less material damage or post-cutting cleanup.

Trigger Only Once

The built-in pilot arc feature really comes in handy when cutting items such as chain-link fences or expanded metal. No need to retrigger each time you hit an open gap of air; the pilot arc keeps the arc on, allowing you to quickly and accurately move to the next target section. The result is faster cuts PLUS less wear and tear on your electrodes and nozzles.

Tough, Capable and Versatile
Loaded with Features

Loaded with Features

You Control the Air Pressure

Many times air compressors put out more air pressure than a plasma cutter needs or can even handle. The Plasma 375 has an adjustable on-board air regulator to prevent excessive air pressure from entering the machine and causing damage. A front panel air pressure gauge clearly indicates the pressure you've set.

The Convenience of Interchangeable Parts

The Plasma 375 includes a high-quality 18-ft. Trafimet® Torch — the same plasma torch used on other Klutch brand plasma cutters such as the Plasma 275 (Item #45435). If you have multiple plasma cutters, one set of parts can service both compatible units!

Keep Your Current Up to Par

A cutting current adjuster knob provides the versatility of variable settings, allowing you to choose the cutting current output you need to do the job right. Trying to cut thicker metals? Cranking your current up to a higher output setting to match your needs is a breeze.

Easy Pressure Monitoring

Keep your air pressure at the best levels for optimal cutting performance. An easy-to-view pressure light automatically turns on to warn you when the air pressure from the compressor gets too low.

Use it Anywhere

Performance on the Go

Enjoy the freedom of plasma cutting almost anywhere. Built-in inverter technology makes this unit a powerful, yet very lightweight, performer. The quick connect torch and ground cable provide easy setup and take-down, while a convenient carry handle encourages you to take it along with you.

Detail Work on Your Prized Possessions

If you’re looking to restore that prized old car or take care of your own body work, the excellent plasma characteristics ensure quality cuts. No matter how delicate or tough the project may be, you’ll be able to cut with confidence.

Use it Anywhere
Safety Matters

Safety Matters

No More Overheating

Be it a hot day or a larger cutting project, the thermal overload protection ensures that your plasma cutter will stay safe no matter how hard you run it. A built-in thermostat prevents the unit from overheating, delaying power to the motor until the unit has sufficiently cooled. The unit also safely shuts down in over-voltage or insufficient voltage situations.

Know When You're Ready

A highly visible work indicator light mounted on the front of the unit shines brightly whenever you are cutting, so there's no mistaking that the unit is in full operating mode.

Stays Safely Grounded

To further protect the user against improper usage, the 375 Plasma Cutter requires a ground clamp to be properly secured before the unit will operate. If the ground clamp comes loose, the unit safely and immediately shuts down.

Cut with Confidence

Expert Answers Are Available

Northern Tool + Equipment is here to help you succeed. Our field trained, dedicated team of welding experts is ready to help — call or email and you’ll get a prompt response.

The Klutch Advantage

The Klutch Plasma 375 is built to last and perform. But to give you extra peace of mind, we stand behind our product with a 3-year limited warranty on the main unit and a 1-year limited warranty on the torch.

Guaranteed Satisfaction

Shop in complete confidence, knowing that Northern Tool + Equipment protects your investment and is ready to provide you with the assistance and helpful resources you need.

High-Quality Replacement Parts — Always Available

Replacement parts are stocked at our Northern Tool + Equipment warehouse and ready to ship the same day your order is received.

Cut with Confidence

Features + Benefits

Features for Klutch Plasma 375i Plasma Cutter — 230V, 40 Amp
  • Increased power in a super lightweight package for exceptional portability
  • The inverter system easily turns fluctuations in input power to consistent output for better cuts
  • Requires less input amperage, reducing the overall input power requirement by about 25% when compared to traditional transformer plasma cutters
  • Maximum input amperage draw on 230V is 25 Amps
  • Cuts electrically conductive material
  • Cuts 3/8in. mild steel, 1/4in. aluminum, 1/4in. stainless steel, 1/4in. galvanized metal, 1/8in. copper and 1/8in. brass
  • Uses shop air — no special gases required
  • Pilot arc feature for cutting fence and expanded metal
  • Troubleshooting indicator lights
  • Built-in air pressure gauge and pressure adjustment control
  • NEMA 6-50P plug
  • 3-year limited warranty; 1-year warranty on the torch
Key Specs
Item# 45436
Brand Klutch
Manufacturer's Warranty 3 year limited warranty
Ship Weight 32.86 lbs
Volts 230
Compressor Included No
Pilot Arc Yes
Amps 15–40 (25A max. on 230V)
Cutting Thickness (in.) 3/8 mild steel, 1/4 stainless steel, aluminum, 1/8 copper, brass
Duty Cycle 35% at 40A
Plasma Gas Flow/Pressure 4.5 CFM at 60 PSI required
Clamp Cable Length (ft.) 10 ground cable, 18 1/2 torch/torch cable
Power Cord (ft.) 6 1/2
Cart No
Dimensions L x W x H (in.) 17 x 6 1/2 x 12 1/2

Customer Reviews

Product Question + Answer
Accessories Frequently Purchased with this Item
We Recommend
Klutch Plasma Cutter Nozzles — 3-Pk.
Klutch Plasma Cutter Nozzles — 3-Pk.
Item# 48325
In Stock Online
 
Only $15.99
Add to Cart
Klutch Plasma Cutter Electrodes — 3-Pk.
Klutch Plasma Cutter Electrodes — 3-Pk.
Item# 48326
In Stock Online
 
Only $18.99
Add to Cart
Klutch Plasma Cutter Diffusers — 2-Pk.
Klutch Plasma Cutter Diffusers — 2-Pk.
Item# 48323
Backordered Online — ships in 3 - 8 Business Days
 
Only $25.99
Add to Cart
Klutch Plasma Cutter Torch Cover — Replacement Cover for S 45 Plasma Torches
Klutch Plasma Cutter Torch Cover — Replacement Cover for S 45 Plasma Torches
Item# 48324
In Stock Online
 
Only $25.99
Add to Cart
Klutch Compact Locking Welding Cabinet — 135-Lb. Capacity
Klutch Compact Locking Welding Cabinet — 135-Lb. Capacity
Item# 48300
In Stock Online
 
Only $139.99
Add to Cart
Safety
Hobart Premium Form-Fitted Welding Gloves — Leather, Beige and Brown, X-Large, Pair, Model# 770440
Hobart Premium Form-Fitted Welding Gloves — Leather, Beige and Brown, X-Large, Pair, Model# 770440
Item# 164099
In Stock Online
 
Only $29.99
Add to Cart
Hobart Welding Apron — Leather, Brown, One Size Fits Most, Model# 770548
Hobart Welding Apron — Leather, Brown, One Size Fits Most, Model# 770548
Item# 28537
In Stock Online
 
Only $29.99
Add to Cart
Replacement Parts
Call To Order: 1-800-657-0516

Mon - Fri 7:00 AM - 6:00 PM (Central)
Sat 7:00 AM - 3:00 PM (Central)

Don't Know Your Part Number?

Locating the part number for your item ahead of time will help ensure you quickly receive the correct items.

Find Parts
Parts + Service Available at Stores

Look for stores that have this icon:

parts + service Parts + Service

Find Stores

Warranty

Compare with Most Popular Plasma Cutters

See All Plasma Cutters
 
Currently Viewing
 
 
 
 
 
Item# 45436
Klutch Plasma 375i Plasma Cutter — 230V, 40 Amp The price is $699.99.
Klutch Plasma 375i Plasma Cutter — 230V, 40 Amp
4.5 / 5 (93)
 
Only $699.99
Free Shipping
Item# 48736
4.5 / 5 (54)
Reg. $789.99
Sale $759.99
Save $30.00
Save $30.00 + Free Shipping
Item# 55726
4.5 / 5 (4)
 
Only $829.99
Free Shipping
Item# 48642
4.8 / 5 (13)
Reg. $1,299.99
Sale $1249.99
Save $50.00
Save $50.00 + Free Shipping
Item# 48643
4.9 / 5 (17)
Reg. $1,499.99
Sale $1399.99
Save $100.00
Save $100.00 + Free Shipping
Volts
230 115 230 115/230 230
Compressor Included No Yes - No No
Pilot Arc Yes No Yes No Yes
Amps
15–40 (25A max. on 230V) 12 42 27 40
Cutting Thickness (in.) 3/8 mild steel, 1/4 stainless steel, aluminum, 1/8 copper, brass 1/8 (mild steel) 9/16 clean; 7/8 sever 3/8 (mild steel, clean cut) 5/8 (mild steel, clean cut)
Sever Thickness (in.)
- 1/4 7/8 5/8 7/8
Duty Cycle
35% at 40A 35% at 12A 30% at 60A 35% at 240V; 20% at 120V 50% at 40A
Plasma Gas Flow/Pressure 4.5 CFM at 60 PSI required Preset w/built-in compressor 4.5 CFM at 60 PSI required 3.0 CFM at 90–120 PSI recommended 4.8 CFM at 90–120 PSI recommended
Clamp Cable Length (ft.) 10 ground cable, 18 1/2 torch/torch cable 12 10 12 12
Power Cord (ft.) 6 1/2 6 6 1/2 10 10
Cart No No - No No
Dimensions L x W x H (in.)
17 x 6 1/2 x 12 1/2 8 x 13 x 10 20 11/16 x 11 1/32 x 15 5/32 14 x 8 x 11 14 x 8 x 11