Skip to content
TOUGH JOBS DONE RIGHT: Serious Tools Up to 50% Off. Shop the Deals >
Northern Tool Equipment Logo TextNorthern Tool Equipment Logo text link to Home.
Print

Ironton 115V Water Transfer Pump, 330 GPH, 1/10 HP, 3/4in. Ports

Item# 107791
"Ironton 115V Water Transfer Pump, 330 GPH, 1/10 HP, 3/4in. Ports"
Top Seller
Ironton 115V Water Transfer Pump, 330 GPH, 1/10 HP, 3/4in. Ports

This is a carousel with one large zoomable image and a track of thumbnails on the left. Select any of the thumbnail buttons to change the zoomable image on the right. If a thumbnail is a video or 360 degree image thumbnail, or the last thumbnail in the list, the button will open the product media modal.

Ironton 115V Water Transfer Pump, 330 GPH, 1/10 HP, 3/4in. Ports

Click or Tap image to Zoom

$87.99

  • Shipping: 

    Free shipping (lower 48 states) - Available now
    $19.99 Same Day

  • Store Pickup: 

    3 in stock at Fredericksburg VA - Pickup in under 1 hr

  • Non-submersible pump is designed for removing water to less than 1/2in. from surface level areas
  • Dependable 115 Volt, 1/10 HP, 2 Amp motor pumps up to 330 GPH
  • Creates 11 PSI max. with a maximum discharge head of 50ft.
  • Constructed of high-strength, corrosion-resistant materials for trouble-free service
  • Fan-cooled, thermally protected motor is CSA listed

  • Prop 65 Warning: See Details

See full description

  • Description

  • Key Specs

  • Reviews

  • Q & A

  • Warranty

  • Compare

Product Summary

This 115V non-submersible Ironton Water Transfer Pump drains or removes water to less than 1/2in. from surface level areas with the suction attachment. The dependable 115 Volt, 1/10 HP, 2 Amp motor pumps up to 330 GPH and creates 11 PSI max. with a maximum discharge head of 50ft. 3/4in. suction and discharge ports offer 5ft. max. suction lift. This unit is made of high-strength corrosion-resistant materials for years of trouble-free service. The motor is fan cooled, thermally protected and CSA listed. This unit features a 6ft. power cord, 6ft. suction hose, suction attachment, suction strainer and a set of replacement motor brushes. Priming is required prior to use. This pump is intended for cold water use only (not for use with fuel or other flammable liquids).

What's Included

    (1) Water transfer pump (1) 6ft. suction hose (1) Suction strainer (1) Suction attachment (1) Set of replacement motor brushes

Downloads

Product Manual

Features + Benefits

  • Non-submersible pump is designed for removing water to less than 1/2in. from surface level areas
  • Dependable 115 Volt, 1/10 HP, 2 Amp motor pumps up to 330 GPH
  • Creates 11 PSI max. with a maximum discharge head of 50ft.
  • Constructed of high-strength, corrosion-resistant materials for trouble-free service
  • Fan-cooled, thermally protected motor is CSA listed
  • 3/4in. suction and discharge ports with 5ft. max. suction lift
  • Clear hose design allows you to see the water moving to ensure proper operation
  • 6ft. power cord provides added reach
  • Comes complete with 6ft. suction hose, suction attachment, suction strainer and a set of replacement motor brushes
  • Priming is required prior to each use
  • Designed for cold water use only (not for use with fuel or other flammable liquids)

Key Specs

AttributeSpecification

item#

107791

Brand

Ironton

Manufacturer's Warranty

1 year limited warranty

Ship Weight

6.48 LB

Max. Flow

330 GPH

Port Size

0.75 in

Volts

115

Phase

Single-phase
AttributeSpecification

Max. Head Pressure

50 ft

Watts

90

Amps

2

Vertical Lift

5 ft

Discharge Flow @ 0 Ft.

330 GPH

Housing Material

Plastic

Horsepower

0.1

Reviews

Questions & Answers

12 Reviews This action will navigate to reviews.

Questions

1–8 of 8 Questions  
Sort by:

  1. Where do i oil the pump

    1 answer

    1. Add 1 tablespoon of vegetable oil to both the inlet and the outlet to prime. A lightweight oil should be applied to the impeller and the shaft seal if they are replaced.

      Helpful?

  2. Can this pump be used to transfer potable water?

    1 answer

    1. This pump is not approved for use with potable water.

      Helpful?

  3. Can I pump antifreeze with this pump?

    1 answer

    1. This pump is designed for cold water use only. It is not approved for use with antifreeze.

      Helpful?

  4. Can this pump be used to pump weed killer like round up?

    1 answer

    1. This pump is designed for use with clear water only.

      Helpful?

  5. Is this an “on demand” type pump that shuts off automatically when a valve is closed

    1 answer

    1. This pump is not an on-demand pump.

      Helpful?

  6. Does this pump have garden hose threads or 3/4" NPT??

    1 answer

    1. This transfer pump has 3/4" garden hose threads (GHT).

      Helpful?

  7. Can this pump be mounted in a vertical position (i.e. with the motor above and the pump housing at the bottom)?

    1 answer

    1. Mounting this pump in a vertical position could cause flow issues. It should only be mounted in the horizontal postion.

      Helpful?

  8. If this pump becomes clogged how do you clean it?

    1 answer

    1. You can remove the impeller cover on the front of the pump to clear out a clog.

      Helpful?

Warranty

Manufacturer's Warranty

1 year limited warranty

Extend Your Warranty Coverage with a Northern Protection Plan (NPP)

Replacement Plan — 1 Year

A Northern Protection Plan is available after adding the product to your shopping cart.

Recently Viewed Items

This is a carousel with auto-rotating slides. Activate any of the buttons to disable rotation. Use Next and Previous buttons to navigate, or jump to a slide with the slide dots.

Ironton 115V Water Transfer Pump, 330 GPH, 1/10 HP, 3/4in. Ports
4.7 out of 5 stars. 12 reviews

Ironton 115V Water Transfer Pump, 330 GPH, 1/10 HP, 3/4in. Ports

Item # 107791

$87.99