ProSeries Exterior Scaffolding Accessories
Filters
1-1 of 1 Products
Item # 5998025
Scaffolding
For your crew or for you, having the right scaffolding set on site isn’t just about reaching where you need to, it’s about working and moving safely, efficiently, and on schedule. A solid scaffolding system gives you a stable work platform for everything from masonry and siding to general repairs so crews can get to work faster. When you’re buying scaffolding, durability, ease and flexibility of set up matter most. Having equipment that can handle hard daily use, adjust to different heights, and bring down cleanly for transport or storage. A quality scaffolding set means fewer slowdowns, safer work conditions, and a setup you can rely on, job after job. Shop this selection of scaffolding sets and pieces that feature industry leaders Metaltech.
Scaffolding Equipment Frequently Asked Questions:
What are the different scaffolding pieces?
- Standards: Vertical scaffolding supports
- Ledgers: Horizontal scaffolding supports
- Putlog Holes: Added holes used for anchoring to the structure
- Rakers: Support ties for scaffolding
- Cross Braces: Scaffolding support pieces
- Platform: Solid floor-type piece to walk/stand on
- Wires & Chains: Suspend a scaffolding platform from a structure’s roof
- Couplings: Lock supports firmly together
- Guard Railings: Enclose scaffolding edges for added safety
What are the safety items I should have when using scaffolding?
Is there a weight limit for scaffolding?
- Light-duty scaffolding: 25 lbs. per sq. ft.
- Medium-duty scaffolding: 50 lbs. per sq. ft.
- Heavy-duty scaffolding: 75 lbs. per sq. ft.
What are spme tips for putting together and taking apart scaffolding equipment?
ASSEMBLY:
Step 1: Level the ground at the assembly space. Find dry, solid ground so no slipping or sinking takes place. Scout the area for hazards or obstacles and make sure you will be able to avoid them when the scaffolding is assembled.
Step 2: Place 1ft. x 1ft. foot pads under each bottom scaffolding foot, especially when assembling on soft or sandy ground.
Step 3: Each vertical frame should be locked into a foot pad. Shakey or unsteady frames should be braced or secured with tie wire. (NOTE: Do not use tie outs to brace diagonal bars.)
Step 4: Place plank grade lumber (Do NOT use plywood or wood with knots) onto the scaffolding. Ensure at least a 4” overlap at each end of the frame.
Step 5: Raise height of assembly by locking in more vertical scaffolding beams and attaching diagonal braces in a crisscross pattern on the front and back of the scaffolding to add stability. The braces also provide a rail for added security. Top with another piece of plank grade lumber, then continue the building process following the same sequence of steps until the scaffolding is as high as needed.
DISASSEMBLY:
Step 1: Work in reverse order of the assembly process. Start by unclipping or unlocking the top scaffolding bars.
Step 2: Unclip or remove the diagonal braces.
Step 3: Remove the planks of lumber used as a floor for the top level. (Ask for assistance as lumber may be heavy working over your head.) Make sure you are on the next level down while removing planking.
Step 4: Unlock or unclip the next set of vertical scaffolding and continue to work your way down the scaffolding assembly in the manner described in steps 1 through 3 until you reach the bottom.
Step 5: Remove all foot pads from the bottom of the scaffolding—and you are finished.
NOTE: At least 2 people are recommended for assembly and disassembly of scaffolding. Please check all state rules, regulations and special requirements prior to assembly.