Convert-A-Ball Interchangeable Hitch Ball Set - 1 7/8in., 2in. & 2 5/16in. Dia. Balls, 1in. Dia. Shank
4.9
5
8
8
Convert-A-Ball hitch set
awesome set, as I have 2 of the 3 sizes on my trailers; third time I have purchased these, so all my towing vehicles have one; stainless is great, no rust at all
October 8, 2012
Quick Change
I've had this convert-a-ball for seven years and pull different trailers with different size balls and have not turned a wrench yet.What a great setup.
June 7, 2011
Convert A Ball
Great product, reasonable price. If your like me and tow several trailers all with different hitch sizes, then you need this set up. Much easier than changing complete ball and shank assemblies, no wrenches needed. Push out self locking pin with a screwdriver, bolt, or even a nail and remove the ball from shank. Put other ball in its' place and push pin in with fingers. That easy. Only recommendation is that you keep bore of pin and ball clean and lubed. Using this one year and no troubles. Mounted an a Ram 3500 used extensively.
March 14, 2011
Great time saver if you do a lot of towing.
One of the better ideas to come out of the towing industry, I have a set in each truck to ensure we always have the correct size hitchball when we need it.
September 13, 2010
trailer balls
Have bought two sets of these balls for trucks, always have correct ball in bag of truck to tow anything
June 1, 2010
trailer balls
this is an awesome product. less bulky than multiple hitches. very nice item!
January 15, 2008
Hitch Ball Set
Hitch Ball Set 1 7/8., 2in, & 5/16in.
Anyone who, pulls trailers needs these.
They are simple to use.
I pull all kinds of trailers. (small that is)
From Horse trailers, to our Welding trailer, to our Farm type trailers.
You never know, what you will need sometimes, when you go and get
someone else trailer.
January 15, 2008
Great but not excellent
The best thing about this hitch system is that every ball has a 10,000 pound limit because they all use the same 1 inch shank. So no more rusted nuts to break or pipe wrenches needed to change over to a different sized ball. Change outs are simple and easy you just push out the pin that runs through the middle of the ball lift it off and set on another. The only complaint is that the pin can be a little hard to push out with only your fingers. It is easier if you use a phillips screw driver instead which is why I gave it a 4 star rating instead of 5.
March 7, 2007