Northern Industrial Air Blow Gun - 1/4in. Inlet, Model# ATBG092AVA
4.1
5
10
10
Blow gun
This was a disappointment. It was a cheap plastic tool that leaked when connected to the hose and I ended up returning it.
March 15, 2011
Very poor quality
I purchased this item for my shop compressor. It leaked from day 1 and eventually the pin holding the trigger came out. To keep my compressor from running, I would disconnect this gun and then when I needed air, I would reconnect. In addition, the air volume it delivered was totally inadequate. I learned that after I replaced it with another type of gun.
February 22, 2010
Works great.
It works well so far and no problems. I had another one that didn't flow as much as this one does.
February 22, 2010
Light and durable
I bought the Northern Industrial Air Blow Gun — 1/4in. Inlet, Model# ATBG092AVA for everyday use in a foundry to remove loose sand from our CO2 cores and sand molds. The angled outlet was key to the design and the plastic body and pull trigger sounded light and ergonomical. Upon receipt of the tool, we have used it everyday, all day. It is extremely light making nearly effortless work. The rugged plastic body and trigger have held up to the sandy environment and daily wear and tear.
August 11, 2008
Northern tool air blow gun
I purchased this several months ago and have used it on a daily basis at work. It has performed very well, even when it was dropped on the floor several times and kicked around, It's still not broken. The only thing I would recommend is when you put the air fitting on, make sure it is a good quality fitting. Otherwise, you'll have nothing but air leaks. I definately would buy another one if I needed to.
April 14, 2008
Great quality
I like this blow gun from NT much better than similarly-priced and styled blow guns I have gotten from other retailers in the past. Recommended!
January 14, 2008
GREAT VALUE!
I USE MINE TO KEEP MY MACHINE AT WORK CLEAN ALL DAY,TAKES ONLY A FEW SECONDS,VERY POWERFUL BLAST OF AIR. I EVEN BOUGHT A FEW EXTRA ONES AND SOLD THEM TO CO-WORKERS,THEY'RE VERY PLEASED TOO!
October 29, 2007
Air blow gun
This is a great tool for the air compressor. I used it to clean the workshop floor and also the driveway before I had to seal it. This is very handy.
October 8, 2007
Air Blow Gun
This is by far a very handy product, durable, and inexpensive. I use it most of the time to blow away small debris or dirt. Will clear a mess at an instant.
April 13, 2007
Blow gun
So far this has been a very durable blow gun and also priced reasonably. The only negative comment I have is that the picture shows a red product and the one I received is light blue. I was so impressed with it I bought a second one which was also blue.
March 8, 2007