FREE SHIPPING - Northern Industrial Tools Wet Tile Saw - 7in. Blade Size
Great for the money.
The saw is excellent for occasional use. Would not recommend it for the professional but In my opinion, you can get professional results with this low cost unit. Only negative is the flimsy packaging resulted in the saw arriving damaged but usable.
April 20, 2014
The little train that could!
This little saw might seem too small to cut brick, but I used it to cut firebrick for a fireplace I'm building and it worked great. You have to let the saw do the cutting and not FORCE the tile or material into it, or you will jam the blade. Take it slow and it will do a great job. Be sure to keep water in the pan and always start it up with the guard down to avoid being sprayed (the first time you forget that, you'll get spritzed.).
April 1, 2014
Great for small jobs
I bought this to install 30 sq ft of travertine back splash. It worked great. I cannot say how it is on long cuts, I only had to make 4 inch max cuts, but it worked good. I would recommend this if you have a small job.
February 17, 2014
Good saw for homeowner
I was doing a remodel job and needed to lay tile in two bathrooms. The saw worked great. I did slightly chip the tile as it cut, but it was not noticeable once grout was applied. Others looked at the job when I was done and thought it looked professionally done. If I never use it again I saved money by buying the saw and doing it myself. It was well worth the money for small job. Some say it was messy, but most wet saws are. PUT PLASTIC DOWN. Plan to use it to remodel a kitchen later.
December 14, 2013
I would not recommend this to any body!
#1 container which holds water cannot be removed without water clean or dirty to spill over
#2 packaging is very poor
#3 width adjustment is very poor. You need to untie 2 screws and tie back. When in use these screws are dirty and it is hard to line them up
#4 it does not cut perfect straight line. There are cracks on finish all along the cut line. I can't believe people give 5 stars for this product!
May 15, 2013
I had never used a tile saw before and had only one job to do, so I did not need an industrial every day saw.
For a great price, this tool did a great job. There was not one cut that I needed that it could not handle. The job is finished but the saw keeps on going!
April 23, 2013
Northen Industrial 7" Wet Tile Saw
This is an excellent saw if you use it correctly.
Beats paying $100.00 a day to rent one.
Made dozens of cuts, experienced 'NO' chipping what-so-ever. On both 3/8" and 1/4" thick ceramic tiles.
Cuts every bit as well as the more expense commercial grade saws.
March 27, 2013
7 in. tile saw
Great product for the money. a little messy but other than that works great. I was a little sceptical at first when ordering but after receiving I am very happy. It does everything i need it to. I don't know what else to say except I do recommend this to others. Thank You.
October 15, 2012
Product performed well. The blade it came with was decent, but by replacing it the cuts improved. You do catch a lot of spray from water when cutting but other than that it did what it was suppose to and held up to the project. It is a good saw for basic cuts and the occassional need for some tile work. Not recommended for anyone doing a lot of tile work.
October 8, 2012
Works Like A Charm!
This inexpensive tile saw has worked flawlessly in both a major kitchen renovation and a master bath remodel. I couldn't expect more from a tool priced as such. A friend borrowed my tile saw and also commented on the great results.
October 8, 2012