Category 1 3-Pt. Hitch to 2in. Receiver Adapter
This hitch adapter is handy as is and mounted easily. The welds were good and everything was in spec. But, I adapted it to do more. I put weld on chain hooks for pulling logs, attaching trailer safety chains, etc. I also welded some flat stock across the frame to put suitcase weights on and use for loader and snowblower ballast. Would recommend to anyone who needs to move/pull trailers, or who is handy enough to adapt as I have.
October 4, 2014
This product is made from high quality steel. I'm totally satisfied with it.
September 26, 2014
Handling materials without changing implements
For the price, this unit covers the gap I had in moving, parking, picking up and handling loads with the simple changing of a Reese attachment. Nice...
August 24, 2014
The hitch adapter appears to be well made and sturdy. The welds look good, and in general I am pleased. However, the top ball and the top bracket are almost 0.75 inches off center! It is off enough that you can actually see it without the need for a ruler. This will interfere with using it with a Quick Hitch. If not for the center bracket being off center, I would give it 5 stars. I assume most are on center, and I just happened to get a bad one.
July 8, 2014
Not Strong Enough
I purchased this to move trailers around my farm. This device does make the process a lot easier, however the implement is just not made strong enough. This is probably why there is not a weight capacity listed. The brackets for the 3 point hitch, top link, and braces at the corners are very thick and heavy duty steel. However, the main square tubing of the implement is very thin tube steel. I used it to move a 3 ton feed bin, that was only 3/4 full, using the receiver hitch and a clevis hitch, as soon as I went to raise the trailer tongue with my tractors 3 point hitch system, the bottom piece of steel with the receiver hitch twisted. I would only use this to move light and or empty trailers.
June 30, 2014
Category 1 3pt hitch to 2 in. receiver adapter
This product worked flawlessly. I used it to tow a trailer in the Memorial Day Parade.
June 8, 2014
Applied this a new Kubota. Easily attached. Makes moving my trailer and boat a very easy job.
June 8, 2014
Had to Drill It Out Before I Could Use It...
Hitch pin hole in 2" receiver was drilled at an angle at factory--thus I could not fit pin through. Had to drill out to a larger diameter to accept the pin. Pain in the butt, but quicker than sending back and getting another.
Otherwise works as advertised.
June 2, 2014
Very well built and more handy than first thought. Price was better than any other location.
May 25, 2014
This item appears to be well built and plenty heavy for uses intended. I plan to modify it by adding 2 more receivers and then able to attach spears for large hay bale moving. Finish is very heavy powder coat. I only wish the ball was not welded on and not changeable.
May 18, 2014