SunStar Heating Products Infrared Ceramic Heater — NG, 52,000 BTU, Model# SGM6-N1A

• Constructed from aluminized steel for corrosion resistance and long life
• Aluminum reflectors are designed to maximize radiant output
• Heaters can be angle mounted horizontally and up to 45 degrees
• The minimum mounting height is 14ft. above finished floor for uniform energy distribution and human comfort
• Requires the following clearances from any combustible material: 36in. above, 72in. below and 36in. from the sides of the heater
• The minimum supply gas pressure is 7.0in. Water Column (WC) and the maximum supply pressure is 14in. WC gas pressure
• If higher gas pressure is supplied, you will need to install a line pressure regulator (sold separately) to reduce it to less than 14in. WC (or 1/2 PSIG)
• Supply pressure of 7in. WC is critical and supply pressure less than 7in. WC can affect the operation of the pilot/heater
• The standing pilot flame can be affected in windy/drafted areas and not recommended in these environments
• No assembly required
• Heaters are 100% test-fired prior to shipment
• CSA design certified

Manufacturer Warranty: 12 months limited parts / No labor