Pieh Tool Cone Mandrel — 1in., Model# PTCM1

{"catalogEntry": { "catalogEntryIdentifier": { "uniqueID": "200449140", "externalIdentifier": { "partNumber": "426517" } }, "description": [{ "fullImage": "/images/product/images/426517_med.jpg", "shortDescription": "Pieh Tool Cone Mandrel — 1 1/4in., Model# PTCM114", "longDescription": "This Pieh Tool 1 1/4in. Cone Mandrel is for hammering barstock into perfect conical rings or scroll shapes. It sits in the anvil's hardy hole vertically and has a purpose similar to the horn on an anvil. In years past mandrels were also used to make bindings for wheel hubs. Mini-mandrel cone fits into anvil hardy, vise or swage block hole. Shank is not tapered. Approx. 8in. long overall; 5 3/4in. from base to tip. Diameter starts at 2 1/2in. and tapers to 3/16in. point. U.S.A." }], "offerPrice": "Only $69.99", "wasPrice": "", "salePrice": "", "productRating": "", "productNumRatings": "0" }, "catalogEntryURL": "http://www.northerntool.com/shop/tools/product_200449140_200449140" }

{"catalogEntry": { "catalogEntryIdentifier": { "uniqueID": "200449139", "externalIdentifier": { "partNumber": "426516" } }, "description": [{ "fullImage": "/images/product/images/426516_med.jpg", "shortDescription": "Pieh Tool Cone Mandrel — 1in., Model# PTCM1", "longDescription": "This Pieh Tool 1in. Cone Mandrel is for hammering barstock into perfect conical rings or scroll shapes. It sits in the anvil's hardy hole vertically and has a purpose similar to the horn on an anvil. In years past mandrels were also used to make bindings for wheel hubs. Mini-mandrel cone fits into anvil hardy, vise or swage block hole. Shank is not tapered. Approx. 8in. long overall; 5 3/4in. from base to tip. Diameter starts at 2 1/2in. and tapers to 3/16in. point. U.S.A." }], "offerPrice": "Only $69.99", "wasPrice": "", "salePrice": "", "productRating": "", "productNumRatings": "0" }, "catalogEntryURL": "http://www.northerntool.com/shop/tools/product_200449139_200449139" }

{"catalogEntry": { "catalogEntryIdentifier": { "uniqueID": "200449141", "externalIdentifier": { "partNumber": "426518" } }, "description": [{ "fullImage": "/images/product/images/426518_med.jpg", "shortDescription": "Pieh Blacksmith Tools Cone Mandrel — 3/4in., Model# PTCM34", "longDescription": "This Pieh Tool 3/4in. Cone Mandrel is for hammering barstock into perfect conical rings or scroll shapes. It sits in the anvil's hardy hole vertically and has a purpose similar to the horn on an anvil. In years past mandrels were also used to make bindings for wheel hubs. Mini-mandrel cone fits into anvil hardy, vise or swage block hole. Shank is not tapered. Approx. 8in. long overall; 5 3/4in. from base to tip. Diameter starts at 2 1/2in. and tapers to 3/16in. point. U.S.A." }], "offerPrice": "Only $69.99", "wasPrice": "", "salePrice": "", "productRating": "", "productNumRatings": "0" }, "catalogEntryURL": "http://www.northerntool.com/shop/tools/product_200449141_200449141" }

{"catalogEntry": { "catalogEntryIdentifier": { "uniqueID": "200449142", "externalIdentifier": { "partNumber": "426519" } }, "description": [{ "fullImage": "/images/product/images/426519_med.jpg", "shortDescription": "Pieh Blacksmith Tools Cone Mandrel — 7/8in., Model# PTCM78", "longDescription": "This Pieh Tool 7/8in. Cone Mandrel is for hammering barstock into perfect conical rings or scroll shapes. It sits in the anvil's hardy hole vertically and has a purpose similar to the horn on an anvil. In years past mandrels were also used to make bindings for wheel hubs. Mini-mandrel cone fits into anvil hardy, vise or swage block hole. Shank is not tapered. Approx. 8in. long overall; 5 3/4in. from base to tip. Diameter starts at 2 1/2in. and tapers to 3/16in. point. U.S.A." }], "offerPrice": "Only $69.99", "wasPrice": "", "salePrice": "", "productRating": "", "productNumRatings": "0" }, "catalogEntryURL": "http://www.northerntool.com/shop/tools/product_200449142_200449142" }