FREE SHIPPING Ingersoll Rand Combination Air System Accessories - 1/2in., Filter, Regulator, Model# P39344600VS
4.7
5
7
7
Good product at a good price
Easy to connect. Good price and fast shipping. Filter was easy to set up and use
April 26, 2013
Filter/Regulator
This product is an excellent purchase for the price. I have shopped around at local hardware stores and found this to be a better deal with half the amount of connections required. It has a clean look and is much less bulky than an individual filter/regulator setup. It does not include any mounting hardware with the purchase but the local hardware store can support that need. Since I have used this filter/regulator product, there has been no moisture in any blowout from my tools or equipment, including the blow gun. I routed my air supply system to the filter/regulater and then to my service hose and it works fantastic.
August 15, 2012
It's Ingersoll-Rand what more can you say?
It's a great product but should be included with most of their compressors. I mean you shuck out $800 to $900 for a compressor and it has no regulator. Most air tools run at 90psi and this will pumps out 140psi without the reg.
However, this is a great product and you need it on a compressor.
May 7, 2012
Works great
I purchased this to work with my 3 HP / 230 volt single stage compressor. The adjustment on top has a very wide range of adjustment. You will turn the knob a lot before you notice the needle moving in either direction. Not sure if I like this or not but no way to return once you pipe dope up everything and run the first test. That being said it does what it's supposed to. I installed a shut off valve on both sides of this so that I could open it up and clean the inside out anytime I wanted to without having to release all the air out of my lines in the shop and the 60 gal of air in the tank. When finished I simply open the air going in first then open the valve with the air going out and I am back in business. Just make sure to use the little drain valve on the bottom to take all the air out of the cup and make sure the needle reads 0 before you try to open it or you may damage the O ring that seals the cup onto the regulator when the pressure is released quickly.
May 7, 2012
Great Filter Regulator
I bought this Filter, Regulator for my new IR 80 gallon Compressor. Very well built the drain is a great design no turning just pull it to any side and it drains the bowl. Easy to adjust and install I put a union on both sides of mine so I could remove it easily if needed. Dont Forget to put some ball valve drains in your system to get water out.
August 8, 2011
IR Regulator
IR seems to have fixed design flaws in their previous models. The retaining rings have been strengthened to withstand correct operating pressures. I also like the integrated gauge which is better protected from damage. The regulator is now up to what I have come to expect from IR.
March 14, 2011
high air flow
We needed more air flow capacity at our plant so replaced current ones with these last year . These handle the flow but as all regulators need service
sometimes. We have two - one as spare to swap out. Parts are available for these which is a plus over the inexpensive imports.
Pros - works well on high CFM use - Parts available
Cons - needs repair with high use but are rebuildable
May 31, 2010