Northern Industrial Machinery Mover - 13,200-Lb. Capacity, 360?? Rotation
4.8
5
9
9
Machinery moving, heavy and tight with multi' tons
Tasked to move 22000 pound electric motor into and thru a ship with one 90 degree turn with only 1/2 inch clearance. We fabbed I beams with cups on the bottom, made from 3/4 inch steel plate. The round swivel on top of the roller fit into these cups and held the roller inplace over low spots and during turns. This motor was pulled out overseas and it took them over double the man hours we took partially due to the very good service of these mul;it- ton rollers.
August 14, 2012
Hay handler
I had a piece of equipment that was 27ft. long by 11ft. wide and weighed around 10,000 lbs. With these movers under each of the 4 legs one person could push the machine around with ease! This saved allot of hassle of hooking up chain and straps to the equipment to move around. The only problem I had was the mover steering handles, I had to modify them slightly to get them hooked onto the movers.
May 7, 2012
Work smart, not hard
Got to use my machine skates for the first time moving a 10,000 lb stone profiling machine. The skates allowed me to easily move the machine into position to be loaded on the back of a semi.
I have no idea what took me so long to buy a set of these!!!
For any rigger these are a MUST HAVE Item
January 16, 2012
Machinery Mover
Very nice machinery mover. I put a piece of 3/4" bar stock through the front hole of each roller and it tracks nice and rolls straight. The 4 rollers on each one make it easy to turn the mover with a load on it. I used two movers and a heavy duty floor jack to move some heavy CNC equipment with ease. Good quality product.
March 14, 2011
Machine dollie
this machinery mover works great. The wheels roll smoothly and easily. The only down side that I see is the top plate is smooth and a machine could slip off but otherwise for the price this is a great product.
November 23, 2010
industrial strength
I used this product twice shortly after I purchased it. I needed to move a heavy angle iron frame storage shelf and a huge tire rack full of large truck tires and 16 inch light truck tires and rims. After setting on cement floor with my forklift on 4 of these dollies, I was able to move the tire rack with just pressure from a couple of my fingers. It really rolls smooth on the concrete(can only roll in a straight line tho). This is one of those products I wished I had long before I purchased it. Beefy construction, the swivel pad makes it very versatile. A real winner.
October 22, 2009
Moving the bell
We use the Machinery Movers on a regular basis. They are rugged and reliable and do a great job with the heavy weight equipment we make. With all our equipment being custom work, we never know just what we may have to move. With the Machinery Mover we know we can get the job done safely and efficiently.
November 17, 2008
Great Value
Value and quality well beyond the price. A well made, heavy-duty product that performs better than the price would suggest.
August 19, 2008
Machinery Mover
As a warehousing/distribution/transportation provider, we are requested to move many large heavy items. The machinery mover is an excellent tool for doing this. By using steering arms (not sold by NorthernTool) which can be easily made to attach to the front or rear upper cross bar, heavy loads can be maneuvered into tight areas with ease. The load capacity allows you to move up to 26 tons with a set of 4. We just replaced 2 older units with new ones and are completely satisfied.
January 14, 2008