LiquiVac Oil Changing System - For Small Engines, 3/4-Gallon, Model# 2005
Great for small jobs
This product is great for small-engines, but should not be used in the automotive arena. I will be purchasing the electric model.
October 28, 2013
I use this tool to change the fluid in my Hydro tractor, as well as my generators and presure washer. Works good. It could use a smaller suction line for some of the smaller motors though. It's easy to change the line if need be.
April 23, 2013
LiquiVac Oil Changing System — For Small Engines
This Oil remover is a must have for the Do-It-Yourselfer who maintains his own small engines. A much needed tool for most newer lawnmowers that do not have easy access to a drain plug. I have 3 mowers, 2 with newer Briggs and Stratton engines that have no oil drain access and this makes changing the oil easy and hassle free. It even makes the process easier on the older mower. No more tipping the newer mowers over on their side to drain the oil as shown in the owner's manual. Just vacuum out the oil with no mess or spills.
February 23, 2010
oil extraction tool
Much easier than draining by hand. I use for 2 riding lawnmowere and two push mowers. I am really glad I purchased. It is pretty easy to use.
February 22, 2010
LiquuiVac Oil Change System Small Engine #2005
I have been changing oil in small engines fo over 40 years. The process is time consuming and messy. Thi s unit cuts the time to do the job by better than half. The used oil is contained in the unit and ready for proper disposal. No need to open drain pluge, just pump up the unit, vac the oil out through the fill hole, add new oil and you are done. It is a pleasure to use.
July 20, 2009
great for jobsite oil changes. very portable and elimates oil spills.
its handy, and inexpensive. worth buying.
May 6, 2008
LiquiVac Oil Changing System
Used just once on my snow blower and worked just fine once I got the vacuum started. The cheapo clamp(plastic) just doesn't clamp so I used a regular pliers to grip the tubing--then the oil evacuted easily.
Unfortunately the included tubing did not fit into my rider mower--too wide--so I called the company for a narrower tube--and had it in a matter of days. But I decide to wait until Spring to proceed. I did check and verified that the additional tube will work just fine.
This could be a "perfect" product with a decent clamp which iscritical to establishing a vacuum.
January 16, 2008
LiquiVac Oil Changing System
I use the pump for changing oil in my two cycle engines, namely lawn mowers. It is fast, convenient and a lot less messy that the old way of sitting the lawn mower upon a large flat pan and reaching under there to find and loosen the oil drain plug which was always a pain ti find and clean since it was always covered with dried on grass and mud. I couldn't be more pleased with the product and would highly recommend it for these or similar uses.
October 8, 2007