Concentric/Haldex Hydraulic Pump Mounting Bracket - 5 5/8in.L
this thing is serious, used on my log splitter, it was mounted on a 9.5hp kohler command pro and a 16gpm pump. MADE IN USA!!!!
August 16, 2012
Hydraulic Pump Mounting Bracket
I mounted this bracket on a Honda GX 340 and used the Haldex 16gpm. The bracket bolted up to both with no modification. Runs true, great product. The money spent on it is saved it time and worn out connectors from out of line brackets you weld on. If you are mounting a Haldex 16gpm to a Honda GX 340 this is the best way.
May 26, 2011
MOUNTING A PUMP ON A WOOD SPLITTER
I WANTED TO UPGRADE THE ENGINE ON MY WOOD SPLITTER TO ONE WITH MORE POWER AND ELECTRIC START AND ALTERNATOR. IT HAD A ROPE START ENGINE AND A PEDESTAL MOUNT WITH SHIMS TO LINE IT UP, SEEMS LIKE YOU COULD NEVER GET QUITE RIGHT SO BOUGHT ONE OF THE NORTHERN #3032 MOUNTS TO PUT PUMP AND ENGINE TOGETHER EVERYTHING MOUNTED PERFECT. VERY HAPPY WITH IT, THE SHAFTS LINE UP PERFECT AND THE CORRECT LENGTH. GREAT DEAL. ALBERT57.
November 23, 2010
I bought a 13hp Grayhound engine. I bought this bracket just hoping it would work, and it did. I had to drill the mounting bolt holes out (just barely) to fit the metric bolts, but everything lined up perfectly.
November 21, 2010
i have just bought nice product my only complaint is i put it on gx2709hp honda but the output shaft on motor is to long for the braket to work with a gandg lovejoy so i had to shim the braket away from motor 1half inch for clearences but other than that no problem
February 22, 2010
This bracket sure made it easy to mount the pump. I have an old motor and was a little concerned it would line up but it did and worked great.
November 6, 2009
I used this for my log splitter project and found that it worked perfectly. I used a 7.5HP Briggs Vanguard engine with a Haldex 13.6 GPM two stage pump. This made the installation very easy. I would reccomend using bolt kit # 3215 to complete the install. The bolts in the kit were exactly the correct thread as well as the correct size.
November 19, 2008
Pump Bracket 3032
This pump bracket is what I used to mount my 2 stage pump to my motor.The pump and motor aligned perfectly,it took the guesswork out of (did I get it right the first time).I also recomend ordering the bolt kit item(3215) in which all bolts are the correct length and threads.The heavy duty coupling is another item I would recomend,withheavy duty insert. I built my log splitter for heavy duty use and it has been in operation for a couple hundred hours working flawlessly.If you are building a splitter like I did or repairing one,I would highly reccomend these parts!
November 18, 2008
This cast alum. pump mount makes any project a clean and simple install
A fair size window to connect pump to motor (good room for fingers) machined in all the right places, good fit.
November 17, 2008
the hydraulic pump mounting bracket fit the Honda 8HP engine and the hydraulic pump perfectly. Solid attachment to motor. It came with plastic protective covers for the coupling area . Good solid well cast part. Nicely finished and painted.Would recommend to anyone building or upgrading a log splitter. The attaching parts were exactly what was needed for hardware to complete the job.
August 11, 2008