This is the Boominator 1200PS "Economy" nozzle.
All application data is on www.Boominator.com
It is made in USA. Boominator (Udor corp.) also makes "industrial" grade stainelss steel versions of these, but of course they cost much more.
November 15, 2013
Great sprayer tip
I really like this broadcast sprayer tip, it sprays about 20 feet wide. I did have trouble getting parts to hook it to my sprayer, but I finally used a 3/8 air hose fitting, and it works great. no more boom arms and it makes my ATV sprayer tank easier to store and more compact. I made a simple bracket, to aim my sprayer hose and fitting upward, and then I sprayed 30 acres for weeds.
September 17, 2013
works great, sprays a even and uniform pattern. I
highly recommend. I will be adding an additional one to the side for spraying around the edge of fields.
September 17, 2013
This nozzle is a good alternative to a spray arm arrangement. It covers about a 16' swath. The coverage is not completely uniform but is acceptable for most applications. It is not hard to install with a few parts from the hardware store.
April 24, 2013
I WAS VERY HAPPY WITH THE NOZZLE WITH HOW IT SPRAYED A WIDE PATTERN. DID JUST WHAT I NEEDED
October 8, 2012
Great replacement for broken boom sprayer
Works Great! I have had my northstar tow-behind sprayer with boom spray tips for well over 15 years and my only problem was that the boom sticks out on both sides and can catch trees and brush especially when making turns. I recently broke my boom sprayer tip that way. Instead of replacing that tip, I used just one of these broadcast nozzle to replace the boom completely. Now I just use this one nozzle centered at the back of the tank (set 3 feet high) and I get about 12 feet of spray coverage with each pass. Since it is centered with the tank it cannot possibly snag on anything!
August 13, 2012
broadcast tip review
Easy to install. works good, just as i expected it to. I was skeptical about getting good coverage wiith only one nozzle, but this one does it.I used it for a sprayer setup i have on my atv, that I use for forest fire suppression, and i will also use it for dust suppression at our poker runs.
August 13, 2012
Broadcast Spray Nozzle
Excellent product. I mounted the nozzle about 36" from the ground level on a post that I welded to a bolt to connect to my ATV hitch. Then connected 3/8" supply line with ball valve to the sprayer. I tested in the driveway, the outside edges were a bit heavy. I then wedged the nozzle to about a 25 degree angle and tested again, PERFECT spray displacement, aproximately 16' wide.
No booms to worry about, no clogging and I can spray through the woods with no hang-ups.
May 12, 2012
Great sprayer addition
I bought this item kinda tongue in cheek. I did not realy believe it would do what I wanted. Surprise! It works great. I use it behind my John Deere L120 to spray fertilizers and weed killers. Gives me great coverage. Does not plug up. As it is mounted it sprays about 9' wide. Makes a quick job of applying liquids. I have recomended this product to others.
January 16, 2012
Takes a beating and keeps on going
Installed this on the front for my airboat and it takes a beating when loading and unloading. The only con to this nozzle for my application is that is puts out A LOT of water. Will suck 2 gallon tank dry quick.
January 11, 2012