Cat Pumps High Speed Rotating Nozzle, Model# 7632.35
At first I didn't know what to think,until I got to close to the paint, and it started to come off. This nozzel works like a champ.
September 17, 2013
Great! Hard water? Squirt WD-40 in after use.
Awesome on 1st use. Went to use it again months later and no rotation. Looked at other reviews, one mentioned applying WD-40 before and after each use. Figured OK we have hard water, deposits may be jamming it up. I squirted some WD-40 in feed side of nozzle and let it sit a few minutes. Presto! Back in action! Now I drain it and squirt a bit of WD-40 in it after each use to keep hard water from crudding it up. Thanks to other reviewer mentioning this!
September 7, 2013
I've been powerwashing commercial bldgs. for 23 yrs. I've been using these nozzles for 11 years. Tried many manufacturers, but this one works the best and rebuildable. The orifice is small so be sure to flush your entire system WELL of dirt/rust first. I found spraying WD40 in the nozzles before and after each use helps tremendously. We have 9 Cat nozzles in the company.
July 8, 2013
This product performs better then expected. Does a great job and quickly.
October 8, 2012
Used it twice and it quit. Took it apart and it still would not work. Worked good when I first got it but never again. Will return to Northern.
September 27, 2010
Works great, when it works!
Having to send mine back for a replacement. Quit rotating after it's 3rd use, probably less that 15 minutes of actual use before it broke. Sending back to Northern to try another one. Hopefully I'll have the same great experiance with the new one that the other reviewers had, it really did an awesome job on my driveway when it worked! Thanks.
May 24, 2010
This is one of the best rotating nozzles I have ever used. It paid for itself on the first job... I used it to remove tar/oakum expansion joints from an old concrete swimming pool... this job used to take 2 men at least a day of backbreaking chopping and ripping... with this nozzle and a 4000 psi 4 gpm washer, I did the job by myself in 2 hrs! Not only that, it did a much better job, removing all traces of tar from the concrete... the old method needed a final clean-up with a sandblaster, yucckers...
I have used heavy industrial ship mounted pressure washers w/rotary nozzles in the past, doing oil spill remediation work; I think this nozzle is just as good, if not better.
May 8, 2010
Excellent Performing Turbo Nozzle
I have owned this nozzle for 9 years and use it approximately 200 hours annually. I have rebuilt it once and have had very good results overall. It is used on a 8hp pressure washer and does a very good job cleaning as I use it on a variety of surfaces. Be careful using it on vehicles. If you get to close, it will peel automotive paint. This nozzle works very well removing decals.
November 11, 2009
CAT turbo nozzle does the job
Wow! This nozzle blasts dirt and grime( and if you are not careful, mortar and soft stone!) with ease. It strips aging paint without a problem at only 3000psi. I have been cleaning siding, painted walls and driveways and what a joy it is over using fan tips. If you watch your pressure and distance, cleaning painted surfaces is no problem. It doesn't come with a quick release coupler, but I added one one for a couple bucks! This is a fine nozzle.
November 2, 2009
I had a cheap nozzle and deciced to buy a better one to see if it would do a better or faster job. i wasnt sure if it was worth the cost.after using it a couple of times its worth the extra money spent.
November 2, 2009