Torin High-Position Jack Stand - 2-Ton Capacity, Model# TRF42009
Have a Tap and Die set ready...
The center post wobbles a bit more than I would like, but it will suffice. The threads on the nuts bolts and threaded holes are poor quality, had to use my taps and dies 3 times to get the thing completely assembled.
June 10, 2014
Torin high position jack stand
Overall this is a good product. The only issue was missing hardware but the Torin was quick to get it shipped out.
February 4, 2014
worst product ever received
ordered 4 jack stands. I could only assembly one due to 3 of 4 missing thrust bearings, no instructions, missing hardware, 6 of 12 missing arm braces. But they did throw in an extra column collar (I guess that's the name because is wasn't on the parts diagram). Other than that, a fine product.
July 22, 2013
torin high postition jack stand
great stand, i use it to hold or steady parts with my two post lift. i work on my 2 race cars and the family vehicles. it has come in real handy. it plays an important part in my shop equipment. i will soon be purchasing another one.
October 15, 2012
This is a pretty decent jack. I use it just to stabilize vehicles on a 2 post hoist. Good range of height adjustment, but the bearing didn't last long at all. It's much more stable than the single post style, but that one didn't eat it's bearing.
June 13, 2011
This a solid jack stand that works as it should. I have used it as an extra support for the lifting arms on my tractor while welding the bottom of the bucket, temporary joist support in the basement (with some wood block spacers) while modifying an opening, support of metal framing while welding, and as an extra " hand" in construction of a storage shed - the top bracket swivels and allowed me to work the joists up into place. While in storage, it makes a perfect support for my 500 watt flood light that I swivel around to light up that shed.
March 21, 2011
Torin High Position Jack Stand — 2-Ton, Model# TRF
This is a great tool. I have a lift in my home garage. So far I have used it to replace the rear end in my 1948 Ford and to support some front end replacement work.
August 13, 2008
Torin High Position Jack Stand
For the money, these are a very good purchase. Shipping box is poor and usually torn; leaving you to supply nuts and bolts. Assembly is required and takes some time, but can be completed by anyone with any mechanical dexterity.
August 11, 2008
Ordered four of these Torin 2-T high-position jack stands and am very pleased with them. After a little difficulty with shipment - missing parts - which Northern quickly resolved, the assembly was pretty fast and they went together easily.
I am using these outdoors to stabilize a trimaran in a coastal salt water environment during hurricane season (I have sprayed them with an antirust inhibitor) .
They are very well made and I am extremely pleased with the strength. They are an amazing value for the price. I expect that I am going to be able to get many years of use from these jack stands.
August 11, 2008
High position jack stand
I purchased two of these stands and think they are very usefull. The assembly instructions were a little vaque but its not rocket science. I will probably be buying two more in the near future.
April 14, 2008