Hopkins Towing Solutions Brake-Force Electronic Trailer Brake Control
Love this thing!
I installed this controller on my 2009 Jeep Wrangler in about an hour. It was very easy and simple by following the instructions. Since there was no plug in harness available for this vehicle, I just tapped into the brake switch harness above the brake pedal. The rest of the towing harness was under the dash as well and made life easier. I mounted the controller just under the radio on the panel in front of the shifter. Perfect fit and easy to reach. It works great with my camper. Dial it in and you don't really know the trailer is behind you. Smooth------- operation. I would recommend it to anyone. I bought another to install on my Chevy p/u when time permits. Can't beat the cost, either!
June 14, 2011
Didn't know what I was missing until I installed this little number. I'd been dragging my 19' travel trailer around without using its brakes and it wasn't a big deal, but once installed, I barely know the trailer is back there behind me!
November 17, 2010
TAP Brake-Force Electronic Trailer Brake Control
This product is great. I put it on my F-250 and it does the same thing all the high and brake controllers do. With just a few clicks and an easy wiring harness installation was quick and easy and i was pulling my trailer in no time at all. I would recommend this product to all those who do the occasional hauling it is a great device.
August 24, 2010
Great deal for price
I bought this for a 2007 dodge Ram 1500. With the adapter from dodge it was easy to install and works great. I occasionally pull trailers up to 20 ft and around 8-10k lbs. It is easy to operate and works great every time to control the load. What a great deal
June 1, 2010
E-Z trailer brake control
Bought a mounting bracket from Jeep specialty company and installed in 06 Wrangler. Easy wiring hook up by following directions,only had to pull drivers lower dash panel[several screws].Specialty bracket located unit on drivers left top dash beside instrument cluster in easy to reach location . Run main wiring from battery thru firewall and under dash. Routed controler wiring thru dash at base of w/sheild and was long enough to reach pedal switch, continued wiring thu cab to rear and out to trailer plug.Hooked up wiring following provided instructions. Easy to adjust when connected and works well. Very good unit for price.
May 24, 2010
Tap Brake Controller
This is a good trailer brake controller for a person who accasionally tows heavy loads like me. It is very easy to install especially if u get a wirring adapter like i did. I have used it only a few times since i have bought it but it works great. It also looks good too.
July 21, 2009
TAP Electronic Brake Controller
I installed this unit on my 1999 Ford F250 Super Duty with no issues. The optional harness adapter allows you to plug directly into the existing vehicle harness. Once the brake adjustment is set, your done!
Overall this item performs as expected and was easy to install. I would recommend this item to others.
November 18, 2008
Simple to operate and install, works great.
As sensitive as you want it.
August 18, 2008
TAP Brake Controller
Easy to install, works as advertised. Great bang for the buck.
August 11, 2008
I wired it with the dealer plug from the fractory and it burned up.( I have wired these in before and had no trouble)so if never worked at all.
August 11, 2008