"Northern Industrial Tools Tire Inflator Gauge, Chuck, and Hose - 1/4in. Inlet, 120 PSI"
this is the second gauge I ordered do to it's picture in the catalog. It does not always give the correct pressure, is hard to keep the air coming out and like I stated, is not accurate. I have had to disconnect and reconnect several times just to try and keep air going into the tire. Plus no way to bleed off air if you overfill. Would not recommend this gauge.
November 6, 2014
Not accurate at all
It fills up the tires just fine, but the tire pressure gauge is not even close to being accurate. You get what you pay for I guess. I have to use a seperate gauge to check the tire pressure. Save your money on this one...dont get it.
October 2, 2014
Does not work does not put air in the tire. The tire pressure gauge only works when u first put on the tire than reads pressure in air compressor unless u clear it out by pushing the valve on gauge haven't even had it a week hopefully they will exchange it for another one I'll give it one more chance n see how it does let u know how the exchange goes.
July 10, 2014
If you will use this sparingly, I guess it will be ok. I need this everyday for my job and it is plain junk. It takes multiple times for it to work correctly and for its simple job, there is no excuse for this. Save your $ and get one of higher quality. It is the most frustrating tire gauge / inflator I have ever used.
June 8, 2014
Glad it was so inexpensive!
Looked great out of the package, hooked it up to the compressor and went to check the tires.... Chuck would not fill, it would let air out but not fill the tire I could see something was out of alignment. Plus the gauge popped out and read like 50psi when hooked to the compressor and didn't move while I tried to fill tire. I had another double sided chuck in the garage that worked I swapped them out and I could put air in the tire with great difficulty and the pressure gauge read '0' the whole time no matter what I did. I would send it back if I wasn't in the middle of my busy season, I work 7 days a week for a few months to make ends meet the rest of the year..
I'll just throw it away. Good luck with this one!
February 24, 2014
Service Station Style
Great gauge similar to what you'd find at a service station and easy to use and read; works best with a "flex" connector so you can easily see the pressure, thanks!!
February 4, 2014
OK air chuck
Have had this chuck several years. The gauge is hard to read. It has to be turned just right to see the pressure. Chuck does not line up to valve stem well sometimes. It takes two hands to use it so if your trying to seat a bead its futile. The rubber wore off the hose so now it leaks and is mostly useless. Even with its problems it does put air in a tire and its not very expensive.
August 11, 2013
Northern Industrial Tools Tire Inflater Gauge, Chuck, and Hose - 1/4in. Inlet, 120 PSI Works great!
August 23, 2012
One GPM Sprayer Pump.
This is an excellent pump and it works great.It was installed on a 15 gallon tank. It will prime consistantly and on runs when demand is called for on the wand.
It was very easy to reinstall with 4 bolts and the holes fit perfectly. I would recommed this pump to anyone needing a good sprayer around the house or farm.
August 15, 2012
tire inflater guage
bought to use on dually wheels and lock on ability is highly recommended works well in hard to get to places accurate guage really pleased with product
May 7, 2012