Prince Pumps

{"catalogEntry": { "catalogEntryIdentifier": { "uniqueID": "200329702", "externalIdentifier": { "partNumber": "1051" } }, "description": [{ "fullImage": "/images/product/images/1051_med.gif", "shortDescription": "Prince Hydraulic PTO Tractor Pump — 11.4 GPM, Model# HC-PTO-2A", "longDescription": "Gear-type, heavy-duty hydraulic pump is designed for PTO drive operation on tractors of all sizes. No additional gearing is required. These pumps feature self-adjusting wear plates that seal off leakage and offset any wear or expansion that may occur during the life of the pump. High tensile aluminum housing, minimum gear clearance, cast iron endplates. Internal splined shafts go all the way through and are supported on both sides by roller bearings. All models have a #16 SAE inlet port and two #12 SAE outlet ports. Include #12 SAE to 3/4in. NPTF female adapter. Reservoir size should at least be as large as the output of the pump." }], "offerPrice": "Only $549.99", "wasPrice": "", "salePrice": "", "productRating": "4.8", "productNumRatings": "6", "shippingStatus": "In Stock" }, "catalogEntryURL": "http://www.northerntool.com/shop/tools/product_200329702_200329702" }

{"catalogEntry": { "catalogEntryIdentifier": { "uniqueID": "21308", "externalIdentifier": { "partNumber": "1098" } }, "description": [{ "fullImage": "/images/product/images/1098_med.gif", "shortDescription": "Prince Hydraulic Hand Pump — 3000 PSI, Model# PM-HP-10B", "longDescription": "Powerful! Operates a hydraulic press, dump, plow, snowblade, platform, frame straightener or similar equipment. 3 positions: 1) 1.25 cu. in. per stroke @1500 PSI, 2) .95 cu. in per stroke @ 2000 PSI, 3) .60 cu. in. per stroke @3000 PSI. One gallon reservoir. Inlet check valve, release valve. Pressure port 3/8in. NPT. Applied handle force 60-65 lbs. Use on up to 200 cu. inch, single- or double-acting cylinder. 16 1/2in.L." }], "offerPrice": "", "wasPrice": "Was $519.99", "salePrice": "Sale $499.99", "productRating": "2", "productNumRatings": "1", "shippingStatus": "In Stock" }, "catalogEntryURL": "http://www.northerntool.com/shop/tools/product_21308_21308" }

{"catalogEntry": { "catalogEntryIdentifier": { "uniqueID": "200329700", "externalIdentifier": { "partNumber": "1050" } }, "description": [{ "fullImage": "/images/product/images/1050_med.gif", "shortDescription": "Prince Hydraulic PTO Tractor Pump — 21 GPM, Model# HC-PTO-1A", "longDescription": "Gear-type, heavy-duty hydraulic pump is designed for PTO drive operation on tractors of all sizes. No additional gearing is required. These pumps feature self-adjusting wear plates that seal off leakage and offset any wear or expansion that may occur during the life of the pump. High tensile aluminum housing, minimum gear clearance, cast iron endplates. Internal splined shafts go all the way through and are supported on both sides by roller bearings. All models have a #16 SAE inlet port and two #12 SAE outlet ports. Include #12 SAE to 3/4in. NPTF female adapter. Reservoir size should at least be as large as the output of the pump." }], "offerPrice": "Only $599.99", "wasPrice": "", "salePrice": "", "productRating": "4.7", "productNumRatings": "7", "shippingStatus": "In Stock" }, "catalogEntryURL": "http://www.northerntool.com/shop/tools/product_200329700_200329700" }

{"catalogEntry": { "catalogEntryIdentifier": { "uniqueID": "21759", "externalIdentifier": { "partNumber": "10521" } }, "description": [{ "fullImage": "/images/product/images/10521_med.gif", "shortDescription": "Prince Hydraulic PTO Tractor Pump — 40 GPM, Model# HC-P-K11", "longDescription": "At 1000 PSI, direct drive hydraulic pump delivers 40.1 GPM at 1000 RPM and over 20 GPM at 540 RPM. Pump has roller bearing construction, pressure balanced self-adjusting wear plates and an internally splined drive shaft, 1 3/8in.-21 tooth, so it needs no gear box. Handles pressures up to 2250 PSI. SAE O-ring ports: inlet #20 1 5/8in.-12, drain outlet #16 15/16in.-12, plus auxiliary outlet, #12 11/16in.-12. Includes #20 SAE to 2in. hose adapter and #16 SAE to 1in. female pipe. Easy installation using torque arm restraint. Reservoir size should at least be as large as the output of the pump." }], "offerPrice": "Only $649.99", "wasPrice": "", "salePrice": "", "productRating": "", "productNumRatings": "0", "shippingStatus": "In Stock" }, "catalogEntryURL": "http://www.northerntool.com/shop/tools/product_21759_21759" }