{"catalogEntry": {
"catalogEntryIdentifier": {
"uniqueID": "200449141",
"externalIdentifier": {
"partNumber": "426518"
}
},
"description": [{
"fullImage": "/images/product/images/426518_med.gif",
"shortDescription": "Pieh Blacksmith Tools Cone Mandrel — 3/4in., Model# PTCM34",
"longDescription": "This Pieh Tool 3/4in. Cone Mandrel is for hammering barstock into perfect conical rings or scroll shapes. It sits in the anvil's hardy hole vertically and has a purpose similar to the horn on an anvil. In years past mandrels were also used to make bindings for wheel hubs. Mini-mandrel cone fits into anvil hardy, vise or swage block hole. Shank is not tapered. Approx. 8in. long overall; 5 3/4in. from base to tip. Diameter starts at 2 1/2in. and tapers to 3/16in. point. U.S.A."
}],
"offerPrice": "Only $69.99",
"wasPrice": "",
"salePrice": "",
"productRating": "",
"productNumRatings": "0",
"shippingStatus": "In Stock"
},
"catalogEntryURL": "http://www.northerntool.com/shop/tools/product_200449141_200449141"
}
{"catalogEntry": {
"catalogEntryIdentifier": {
"uniqueID": "200432114",
"externalIdentifier": {
"partNumber": "426480"
}
},
"description": [{
"fullImage": "/images/product/images/426480_med.gif",
"shortDescription": "Pieh Blacksmith Tools Peddinghaus Cross Pein Hammer — 35-oz. German Cross Pein",
"longDescription": "The German Pattern Cross Pein Hammer gives you a popular tool with a head that is perfect for blacksmithing. The pein side is narrow and allows you to fan out the metal or planish it with ease and precision. Drop-forged construction. Hickory handle with a conical steel wedge."
}],
"offerPrice": "Only $37.99",
"wasPrice": "",
"salePrice": "",
"productRating": "",
"productNumRatings": "0",
"shippingStatus": "In Stock"
},
"catalogEntryURL": "http://www.northerntool.com/shop/tools/product_200432114_200432114"
}
{"catalogEntry": {
"catalogEntryIdentifier": {
"uniqueID": "200432127",
"externalIdentifier": {
"partNumber": "426494"
}
},
"description": [{
"fullImage": "/images/product/images/426494_med.gif",
"shortDescription": "Pieh Blacksmith Tools Billy Scrolling Tongs — 8in. Reins, Model# PT4042S",
"longDescription": "Designed specifically for blacksmiths, Billy Scrolling Tongs with 8" reins are used for scrolling or bending ironwork or other metal without marring the surface. The jaws are smooth, rounded and tapered to about an 1/8" point. The handles are round to flat with balls on the ends. They’re perfect for hard-to-reach areas and easy to use. Constructed of strong yet lightweight SAE 4140 medium carbon steel."
}],
"offerPrice": "Only $39.99",
"wasPrice": "",
"salePrice": "",
"productRating": "",
"productNumRatings": "0",
"shippingStatus": "In Stock"
},
"catalogEntryURL": "http://www.northerntool.com/shop/tools/product_200432127_200432127"
}
{"catalogEntry": {
"catalogEntryIdentifier": {
"uniqueID": "200432089",
"externalIdentifier": {
"partNumber": "426453"
}
},
"description": [{
"fullImage": "/images/product/images/426453_med.gif",
"shortDescription": "Pieh Blacksmith Tools Scrolling Wrench — 10in., Model# CDSW38",
"longDescription": "The Pieh Tools 10in. Scrolling Wrench comes in handy for tight curves, bends and twists in blacksmithing projects, 3/8in. stock or smaller. Constructed of machined carbon steel with a 2in.L jaw, two 1 1/2in.L prongs and a hole in the handle so it can be hung on a hook. U.S.A."
}],
"offerPrice": "Only $21.99",
"wasPrice": "",
"salePrice": "",
"productRating": "",
"productNumRatings": "0",
"shippingStatus": "In Stock"
},
"catalogEntryURL": "http://www.northerntool.com/shop/tools/product_200432089_200432089"
}
{"catalogEntry": {
"catalogEntryIdentifier": {
"uniqueID": "200449131",
"externalIdentifier": {
"partNumber": "426508"
}
},
"description": [{
"fullImage": "/images/product/images/426508_med.gif",
"shortDescription": "Pieh Tool Beeswax — 1 Lb., Model# BEB",
"longDescription": "Pieh Tool Beeswax is combined with other materials to leave a deep, lustrous glow to ironwork. They can be used for exterior and interior work. Generally, blacksmiths blend equal parts of paste wax, linseed oil, and turpentine. A smaller volume of beeswax is then added. Beeswax can also be used by itself. Unlike other waxes, beeswax is nontoxic and can be used on cutlery and utensils. For best results, ironwork should be warm (can hold in your hand) when applying the wax finish. Just rub it on metal to finish off your work or use it for a gentle quench for your punches. U.S.A."
}],
"offerPrice": "Only $16.99",
"wasPrice": "",
"salePrice": "",
"productRating": "",
"productNumRatings": "0",
"shippingStatus": "In Stock"
},
"catalogEntryURL": "http://www.northerntool.com/shop/tools/product_200449131_200449131"
}
{"catalogEntry": {
"catalogEntryIdentifier": {
"uniqueID": "200432111",
"externalIdentifier": {
"partNumber": "426477"
}
},
"description": [{
"fullImage": "/images/product/images/426477_med.gif",
"shortDescription": "Pieh Blacksmith Tools Peddinghaus Wolf Jaw Tongs — 16in. Long",
"longDescription": "The Peddinghaus Wolf Jaw tong is a traditional-style blacksmith tool for picking up a variety of sizes and shapes. The jaw has a V-bit groove, allowing you to hold round or square stock. Openings on the side and end allow you to pick up multiple sizes of stock. 3in.L jaw. Drop-forged construction."
}],
"offerPrice": "Only $74.99",
"wasPrice": "",
"salePrice": "",
"productRating": "5",
"productNumRatings": "1",
"shippingStatus": "In Stock"
},
"catalogEntryURL": "http://www.northerntool.com/shop/tools/product_200432111_200432111"
}
{"catalogEntry": {
"catalogEntryIdentifier": {
"uniqueID": "200449147",
"externalIdentifier": {
"partNumber": "426525"
}
},
"description": [{
"fullImage": "/images/product/images/426525_med.gif",
"shortDescription": "Pieh Blacksmith Tools Billy Scrolling Tong — Small, 2 3/8in. Jaw, Model# PT4042",
"longDescription": "The Pieh Tool Billy Scrolling Tongs are designed for blacksmiths. They are used for scrolling or bending ironwork or other metal without marring the surface. The jaws are smooth, rounded and tapered to about an 1/8in. point. They are perfect for hard to reach areas and are quick to use. The handles are round to flat with balls on the ends. Made to last a lifetime with proper care. They are made of strong yet lightweight medium carbon steel. Reins: 14in. U.S.A."
}],
"offerPrice": "Only $39.99",
"wasPrice": "",
"salePrice": "",
"productRating": "4",
"productNumRatings": "1",
"shippingStatus": "In Stock"
},
"catalogEntryURL": "http://www.northerntool.com/shop/tools/product_200449147_200449147"
}
{"catalogEntry": {
"catalogEntryIdentifier": {
"uniqueID": "200449135",
"externalIdentifier": {
"partNumber": "426512"
}
},
"description": [{
"fullImage": "/images/product/images/426512_med.gif",
"shortDescription": "Pieh Tool E-Z Weld — 1 Lb., Welding Flux, Model# PEZ1",
"longDescription": "Pieh Tool E-Z Weld welding flux adheres to metal at low heat and is good for lap, split, butt or jump welding. Enables blacksmiths to weld tool steel, plow open hearth and Bessemer at significantly lower temperatures than other compounds while making smooth, strong welds. Can be used with steel as well as iron. U.S.A."
}],
"offerPrice": "Only $15.99",
"wasPrice": "",
"salePrice": "",
"productRating": "",
"productNumRatings": "0",
"shippingStatus": "In Stock"
},
"catalogEntryURL": "http://www.northerntool.com/shop/tools/product_200449135_200449135"
}
{"catalogEntry": {
"catalogEntryIdentifier": {
"uniqueID": "200449144",
"externalIdentifier": {
"partNumber": "426522"
}
},
"description": [{
"fullImage": "/images/product/images/426522_med.gif",
"shortDescription": "Pieh Blacksmith Tools Billy Single Pick Up Tong — Small, 1in., Model# PT4013",
"longDescription": "Pieh Tool Billy Single Pick Up Tongs are designed to hold round stock perpendicular to the tong. Made to last a lifetime with proper care. Made of strong, lightweight medium carbon steel. Jaw length: 3in. Reins: 14in. U.S.A."
}],
"offerPrice": "Only $39.99",
"wasPrice": "",
"salePrice": "",
"productRating": "",
"productNumRatings": "0",
"shippingStatus": "In Stock"
},
"catalogEntryURL": "http://www.northerntool.com/shop/tools/product_200449144_200449144"
}
{"catalogEntry": {
"catalogEntryIdentifier": {
"uniqueID": "200449145",
"externalIdentifier": {
"partNumber": "426523"
}
},
"description": [{
"fullImage": "/images/product/images/426523_med.gif",
"shortDescription": "Pieh Blacksmith Tools Billy Single Pick Up Tong — Medium, 1 1/2in., Model# PT4014",
"longDescription": "Pieh Tool Billy Single Pick Up Tongs are designed to hold round stock perpendicular to the tong. Made to last a lifetime with proper care. Made of strong, lightweight medium carbon steel. Jaw length: 3in. Reins: 14in. U.S.A."
}],
"offerPrice": "Only $39.99",
"wasPrice": "",
"salePrice": "",
"productRating": "",
"productNumRatings": "0",
"shippingStatus": "In Stock"
},
"catalogEntryURL": "http://www.northerntool.com/shop/tools/product_200449145_200449145"
}
{"catalogEntry": {
"catalogEntryIdentifier": {
"uniqueID": "200432124",
"externalIdentifier": {
"partNumber": "426491"
}
},
"description": [{
"fullImage": "/images/product/images/426491_med.gif",
"shortDescription": "Pieh Blacksmith Tools Billy V-Bit Bolt Tongs — 1/2in., Model# PT4022",
"longDescription": "Pieh Tool's versatile Billy V-Bit Tongs are designed to hold round or square stock with or without decoration on the end. The front V-bit on the tongs allows you to pick up decorative stock, such as a scrolled hook, from the end. The jaws are smooth and rounded on top with a V-notch running its length. The side of the jaw has a V-notch about 1/2in. from the jaw end for added holding capabilities. The jaw opens before the rivet, allowing you to hold decorative pieces such as hooks, scrolls, etc. Ideal for hard-to-reach areas and quick to use in many situations. U.S.A."
}],
"offerPrice": "Only $59.99",
"wasPrice": "",
"salePrice": "",
"productRating": "",
"productNumRatings": "0",
"shippingStatus": "In Stock"
},
"catalogEntryURL": "http://www.northerntool.com/shop/tools/product_200432124_200432124"
}
{"catalogEntry": {
"catalogEntryIdentifier": {
"uniqueID": "200449133",
"externalIdentifier": {
"partNumber": "426510"
}
},
"description": [{
"fullImage": "/images/product/images/426510_med.gif",
"shortDescription": "Pieh Tool Nail Header — 1/4in., Model# CDNH14",
"longDescription": "Pieh Tool 1/4in. Nail Header is used to make 1/4in. square handmade nails, which have 4 times the holding power of a round wire nail. For use with 3/16in. to 1/4in. round or square hot or cold rolled mild steel rod. U.S.A."
}],
"offerPrice": "Only $29.99",
"wasPrice": "",
"salePrice": "",
"productRating": "",
"productNumRatings": "0",
"shippingStatus": "In Stock"
},
"catalogEntryURL": "http://www.northerntool.com/shop/tools/product_200449133_200449133"
}
{"catalogEntry": {
"catalogEntryIdentifier": {
"uniqueID": "200432099",
"externalIdentifier": {
"partNumber": "426465"
}
},
"description": [{
"fullImage": "/images/product/images/426465_med.gif",
"shortDescription": "Decorative Blacksmithing Techniques DVDs — Set of 4 DVDs, Model# DVD65",
"longDescription": "Get specialized training in the blacksmithing topics that interest you the most with this 153-minute, Decorative Blacksmithing Techniques DVD set. Each DVD is hosted by Texas blacksmith extraordinaire Bill Epps. U.S.A."
}],
"offerPrice": "Only $119.99",
"wasPrice": "",
"salePrice": "",
"productRating": "5",
"productNumRatings": "1",
"shippingStatus": "In Stock"
},
"catalogEntryURL": "http://www.northerntool.com/shop/tools/product_200432099_200432099"
}
{"catalogEntry": {
"catalogEntryIdentifier": {
"uniqueID": "200449213",
"externalIdentifier": {
"partNumber": "426526"
}
},
"description": [{
"fullImage": "/images/product/images/426526_med.gif",
"shortDescription": "Pieh Blacksmith Tools Billy Scrolling Tong — Large, 4 5/8in. Jaw, Model# PT4043",
"longDescription": "The Pieh Tool Billy Scrolling Tongs are designed for blacksmiths. They are used for scrolling or bending ironwork or other metal without marring the surface. The jaws are smooth, rounded and tapered to about an 1/8in. point. They are perfect for hard to reach areas and are quick to use. The handles are round to flat with balls on the ends. Made to last a lifetime with proper care. They are made of strong yet lightweight medium carbon steel. Reins: 14in. U.S.A."
}],
"offerPrice": "Only $44.99",
"wasPrice": "",
"salePrice": "",
"productRating": "",
"productNumRatings": "0",
"shippingStatus": "In Stock"
},
"catalogEntryURL": "http://www.northerntool.com/shop/tools/product_200449213_200449213"
}
{"catalogEntry": {
"catalogEntryIdentifier": {
"uniqueID": "200449146",
"externalIdentifier": {
"partNumber": "426524"
}
},
"description": [{
"fullImage": "/images/product/images/426524_med.gif",
"shortDescription": "Pieh Blacksmith Tools Billy V-Bit Tong — 3/4in., Model# PT4041",
"longDescription": "The Pieh Tool Billy V-Bit Tongs were designed for blacksmiths to hold round or square stock with no decoration on the end. However, because the tongs have a side V-bit, users can pick up decorative stock, such as a scrolled hook, from the side. The jaws are smooth and rounded on top with a V-notch in the front of the jaw running its length. The side has one V-notch about 1/2in. from the jaw end. They are perfect for hard to reach areas and are quick to use in many situations. The handles are round to flat with balls on the ends. Made to last a lifetime with proper care. They are forged from strong high carbon steel. U.S.A."
}],
"offerPrice": "Only $49.99",
"wasPrice": "",
"salePrice": "",
"productRating": "",
"productNumRatings": "0",
"shippingStatus": "In Stock"
},
"catalogEntryURL": "http://www.northerntool.com/shop/tools/product_200449146_200449146"
}
{"catalogEntry": {
"catalogEntryIdentifier": {
"uniqueID": "200449142",
"externalIdentifier": {
"partNumber": "426519"
}
},
"description": [{
"fullImage": "/images/product/images/426519_med.gif",
"shortDescription": "Pieh Blacksmith Tools Cone Mandrel — 7/8in., Model# PTCM78",
"longDescription": "This Pieh Tool 7/8in. Cone Mandrel is for hammering barstock into perfect conical rings or scroll shapes. It sits in the anvil's hardy hole vertically and has a purpose similar to the horn on an anvil. In years past mandrels were also used to make bindings for wheel hubs. Mini-mandrel cone fits into anvil hardy, vise or swage block hole. Shank is not tapered. Approx. 8in. long overall; 5 3/4in. from base to tip. Diameter starts at 2 1/2in. and tapers to 3/16in. point. U.S.A."
}],
"offerPrice": "Only $69.99",
"wasPrice": "",
"salePrice": "",
"productRating": "",
"productNumRatings": "0",
"shippingStatus": "In Stock"
},
"catalogEntryURL": "http://www.northerntool.com/shop/tools/product_200449142_200449142"
}
{"catalogEntry": {
"catalogEntryIdentifier": {
"uniqueID": "200449132",
"externalIdentifier": {
"partNumber": "426509"
}
},
"description": [{
"fullImage": "/images/product/images/426509_med.gif",
"shortDescription": "Pieh Tool Beeswax — 1 Oz., Model# BW1",
"longDescription": "Pieh Tool Beeswax is combined with other materials to leave a deep, lustrous glow to ironwork. They can be used for exterior and interior work. Generally, smiths blend equal parts of paste wax, linseed oil, and turpentine. A smaller volume of beeswax is then added. Beeswax can also be used by itself. Unlike other waxes, beeswax is nontoxic and can be used on cutlery and utensils. For best results, ironwork should be warm (can hold in your hand) when applying the wax finish. Just rub it on metal to finish off your work or use it for a gentle quench for your punches. U.S.A."
}],
"offerPrice": "Only $4.99",
"wasPrice": "",
"salePrice": "",
"productRating": "",
"productNumRatings": "0",
"shippingStatus": "In Stock"
},
"catalogEntryURL": "http://www.northerntool.com/shop/tools/product_200449132_200449132"
}
{"catalogEntry": {
"catalogEntryIdentifier": {
"uniqueID": "200432138",
"externalIdentifier": {
"partNumber": "426505"
}
},
"description": [{
"fullImage": "/images/product/images/426505_med.gif",
"shortDescription": "Pieh Blacksmith Tools Ball Spring Swage — 1/2in., Model# VFBA12",
"longDescription": "The Pieh Tools Ball Spring Swage is crafted from mild steel and produces a 1/2in. shape, which can then be used to make grape clusters or other decorative embellishments to any piece you are forging. As a general rule, spring swages are designed for use on square stock. Square stock produces the best results because there is more material to displace, therefore producing better results. They will work on round as well. Spring swages can be used by hand at the anvil or power hammer. U.S.A."
}],
"offerPrice": "Only $89.99",
"wasPrice": "",
"salePrice": "",
"productRating": "",
"productNumRatings": "0",
"shippingStatus": "In Stock"
},
"catalogEntryURL": "http://www.northerntool.com/shop/tools/product_200432138_200432138"
}
{"catalogEntry": {
"catalogEntryIdentifier": {
"uniqueID": "200432135",
"externalIdentifier": {
"partNumber": "426502"
}
},
"description": [{
"fullImage": "/images/product/images/426502_med.gif",
"shortDescription": "Pieh Blacksmith Tools Acorn Spring Swage — 1/2in., Model# VFAC12",
"longDescription": "The Pieh Tools Acorn Spring Swage is crafted from mild steel and adds a wonderful 1/2in. acorn shape to any piece you are forging, including wine racks, gates, hooks, etc. As a general rule, spring swages are designed for use on square stock. Square stock produces the best results because there is more material to displace, therefore producing better results. They will work on round as well. Spring swages can be used by hand at the anvil or power hammer. U.S.A."
}],
"offerPrice": "Only $89.99",
"wasPrice": "",
"salePrice": "",
"productRating": "",
"productNumRatings": "0",
"shippingStatus": "In Stock"
},
"catalogEntryURL": "http://www.northerntool.com/shop/tools/product_200432135_200432135"
}
{"catalogEntry": {
"catalogEntryIdentifier": {
"uniqueID": "200432134",
"externalIdentifier": {
"partNumber": "426501"
}
},
"description": [{
"fullImage": "/images/product/images/426501_med.gif",
"shortDescription": "Pieh Blacksmith Tools S7 Steel Curved Veining Chisel, Model# VCOO0",
"longDescription": "The Peih Tool Curved Veining Chisel is a useful tool to have for completing a number of decorative blacksmithing projects. Curved design allows you to vein a straight line without lifting the tool; simply rock the tool in the vein and strike, rock the tool and strike. Measures 7in.–8in.L and made from S7 tool steel. U.S.A."
}],
"offerPrice": "Only $24.99",
"wasPrice": "",
"salePrice": "",
"productRating": "",
"productNumRatings": "0",
"shippingStatus": "In Stock"
},
"catalogEntryURL": "http://www.northerntool.com/shop/tools/product_200432134_200432134"
}